Star Wars themed paint/finishing work I’ve done


RINZLERTRON

Sr Member
Figured it would be nice to just have one place where I show the different paint and finishing work that I’ve done on various Star Wars pieces:

MR clone trooper:

CD38F1CB-2597-48A4-ACE0-084B59DBFCCC.jpeg

309AFBC1-7F7C-4F94-9061-E30D4042062B.jpeg

7C1EE849-AA00-4954-B917-342DFDB3C59A.jpeg

Anovos premium FO trooper that I painted up as the FN 2187 helmet:

6F6F124C-5744-4EAF-9094-8BBB586A0582.jpeg

0C7B851F-00B6-4C96-80CC-6079991473CB.jpeg

Anovos prototype Kylo Ren (I think there were only like, 15 of these guys in the wild?)
4A702DDE-E13A-496A-A91C-4B02E9FB6C28.jpeg

48A7C839-31C5-4C8E-A679-6D0B856BD410.jpeg

1E221E39-2D85-4D88-B634-F9E0555641E8.jpeg

EFX Vader ANH plus some armor that I have no idea the maker of (this was a commission, I don’t own this one)
4CC97847-EB97-411A-8033-8EA90C201979.jpeg

AFC32453-8E94-4174-BDAF-4F6915214268.jpeg
8F34CA27-5BF7-4E54-999F-F1B4C430272A.jpeg
EE95EAA3-4602-4768-A672-300F2D4DCD44.jpeg

EE3 (this one was also a commission)

11E0C680-AEBE-4A01-BCE5-524B1C88EECC.jpeg

D6613C0B-648F-438F-B7C0-6DD009F0CCD7.jpeg


heres my Rubies Mando blaster, for when I’m trooping and need something I don’t want messed up.
79AF6724-6ABA-4AF7-A232-95C2630BD526.jpeg
E6D819E3-C25A-497E-9F39-A653D8B866E3.jpeg
AD3C3802-0AF1-4117-995F-DDBFF294B9B6.jpeg



I’ll keep you guys updated as I continue my mando journey and as I paint more Star Wars props
 

Attachments

  • 72F5AF07-E74B-480D-9C87-4D75F7A8C0C3.jpeg
    72F5AF07-E74B-480D-9C87-4D75F7A8C0C3.jpeg
    1.3 MB · Views: 693
  • 7AF6EAEE-A792-45DE-A833-92DDD70D2FBC.jpeg
    7AF6EAEE-A792-45DE-A833-92DDD70D2FBC.jpeg
    1.2 MB · Views: 24
  • D696B8AC-DDCF-41A9-8595-0FAA6086A6C7.jpeg
    D696B8AC-DDCF-41A9-8595-0FAA6086A6C7.jpeg
    1.2 MB · Views: 693
  • FD3CA9B5-6491-4013-BA8F-BB34125A6DAA.jpeg
    FD3CA9B5-6491-4013-BA8F-BB34125A6DAA.jpeg
    332.3 KB · Views: 24
  • 07EA0441-3631-4779-AC04-CF37D3A3DAAC.jpeg
    07EA0441-3631-4779-AC04-CF37D3A3DAAC.jpeg
    4.1 MB · Views: 681
  • 0548C8E7-A9ED-461F-AB2E-DFAE57C8E750.jpeg
    0548C8E7-A9ED-461F-AB2E-DFAE57C8E750.jpeg
    5 MB · Views: 672
  • BA095675-1BBF-4283-B95B-4D52E7357F4F.jpeg
    BA095675-1BBF-4283-B95B-4D52E7357F4F.jpeg
    4.6 MB · Views: 661
  • 7C8AB967-2437-4D7F-A4CC-F1AEDE848D8A.jpeg
    7C8AB967-2437-4D7F-A4CC-F1AEDE848D8A.jpeg
    2.6 MB · Views: 656
  • 0AF7CDA8-2132-495E-B84E-678B9571DD3F.jpeg
    0AF7CDA8-2132-495E-B84E-678B9571DD3F.jpeg
    5.8 MB · Views: 647
Last edited:

RINZLERTRON

Sr Member
A couple more things I’ve done.

One of Beckett’s blasters from solo, printed on my Elegoo Mars:
970244B4-9EDA-44FA-AF5D-4CB66DBA2EBA.jpeg
BBA88A97-11D7-462A-8052-32C1E1684520.jpeg

My personal KR kylo saber that I use for trooping (it’s installed as well)
30ACE042-09D1-41EC-B12B-1A508EEE1A06.jpeg
1C7E2D0D-EB60-4900-A4AF-637C453094E7.jpeg
E8041A60-7BB8-46FA-ACDC-926BF9315A69.jpeg

A background Mando that I’m currently still working on (need to attach ears, antenna, and the visor)
C3A37655-8B42-4122-9EA9-844BE13D1D9D.jpeg


533D516E-E495-4EBC-90A8-4A0CE4E0BBF9.jpeg
 
Last edited:

papamurf812

Active Member
Sure! Just ask which one you want to know more about... I’m happy to share what I know!
What's your method for the damaging? It's super clean. Do you do the toothpaste/ mustard method? And what do you for your "paint flecks"? Do you use an older brush or an airbrush or something else? And last one, what's your technique for the heat weathering, like on the death trooper blaster and the Kylo saber? Thank you for the reply!
 

RINZLERTRON

Sr Member
What's your method for the damaging? It's super clean. Do you do the toothpaste/ mustard method? And what do you for your "paint flecks"? Do you use an older brush or an airbrush or something else? And last one, what's your technique for the heat weathering, like on the death trooper blaster and the Kylo saber? Thank you for the reply!
For the scraping, I use liquid latex. I use a variety of airbrushes, spray guns, and cans to paint all my stuff.

For the heat burns, that’s all airbrushed on with acrylics. A lot of it is simple acrylic inks with alcohol splatters on top.
 
Last edited:

RINZLERTRON

Sr Member
Great work! I really like the chipping effects.
Thanks!
For those interested, the “chipping” on my mando pre-beskar armor and on my clone trooper helmet are actually not real chipping, it’s just applied over everything with a brush. You technically “could” do real chipping for Mando’s armor, but I don’t think the real one was done that way so there’s really no point.
 

RINZLERTRON

Sr Member
2E942117-28D9-4601-A8B6-7765BCF1723C.jpeg

8E14B1BA-14C8-4D91-9DD9-27EEE953CCCA.jpeg

FEB88F60-862C-4B1B-892E-89EDF6741128.jpeg
C15208A7-449D-407D-A172-4974E67DA3B5.jpeg
00C127E6-1104-4D6A-8C8D-B442A3753CF9.jpeg
BE3C8CC8-0AAB-44E1-B273-2F3AB2E1ECA0.jpeg
Repainted all my brown mando armor. This is obviously not the only pieces, I repainted the other pieces too (except the tan shore trooper pieces, I liked those).
02BD2A48-4440-4BA1-9269-C553993F2046.jpeg

Here’s a cool pic showing the base color of all the red/brown/orange pieces. All done by me and just achieved through simple oil weathering.

0C4AA8E9-C7E3-43BB-BFEF-E48DA56D7134.jpeg

did a test paint up on a cheap resin mando helmet I have (NOTE: THE CHEEKS SHOULD BE A GREY SHADOWED COLOR AND I DID NOT DO IT ON THIS TEST HELMET). This was mostly just practice for my clear coating and how dark I want the helmet with alumaluster. I got two drips so still gotta practice some more, but a nice test before I paint my EFX.
 

RINZLERTRON

Sr Member
Amban Rifle stock is almost done. Bought some cheap lumber at Home Depot since I had never worked with wood before and needed something kinda easy to sand. Turned out really nice, I think. Checked the fit this morning before sealing with polyurethane and it’s perfect.
5D204300-86AB-4DAF-A481-6EB8EE82CB4A.jpeg
C325372F-DE99-438B-A6FB-ED89878402FB.jpeg
3510A2CF-F644-4715-9A3B-5B4CCAA46977.jpeg
75D81C2B-19E7-402F-AAB0-CF11E2A7C449.jpeg
MicrosoftTeams-image (1).jpg


It's a little smoother than those last two pics now. The polyurethane dried and so I went ahead and sanded it down and then put another thin layer on it.
 

RINZLERTRON

Sr Member
So I posted a repainted Boba helmet I was working on not too long ago, and honestly, Im going to end up repainting it. It’s for a client of mine and he and I have been trying to figure the colors out for a while. After I got my own person Boba helmet in from Maxi Jazzmx, I went ahead and started testing my new paint ideas out on it. Here’s what I’ve got.

584D37B0-9311-45FE-8498-5B07E2991981.jpeg

ABC42117-5E50-4180-952A-AB4076AB1FA0.jpeg
 

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top