UPDATE 7/29/2022: I still make these if anyone is interested. Prices adjusted for the increased cost of resin.
UPDATE: I have 2 unfinished kits ready to go for anyone that wants them...PM me or email me if you want one.
*************************************************************************************************************************************************
I'm doing a run of agonizer props that I drew up in Solidworks and am producing on a resin SLA printer. The output on SLA printers is stunning, bettering even the best resin casts out there. You won't find build lines like you see on FDM printers. Finishing is easier than even the best resin cast kits. A few minutes with 2-3 grits of sandpaper each and you're ready to prime and paint.
I based mine off of the pictures of the original prop featured on Richard Coyle's web site "Yesterday's Future Tomorrows". I spent a lot of time tweaking it to get the measurements right. The "wings" are angled as in the original prop (a lot of re-casts are out there that were cast in open-face molds, thus didn't have this feature modeled correctly). I am really happy with the final product. Check out the pics here:
For your reference, here's Mr. Spock opening up a can of whoopass on Mr. Kyle in Mirror, Mirror:
And Chekov getting the same treatment from the Klingons in Day of the Dove:
My version comes in two pieces...the bottom body piece and the top red "button" piece. I did this so you won't have to tape off anything to paint the red button. Just paint it separately. I've keyed the body and the button so that the button easily attaches to the main body. You can glue it or not...it stays in place without glue. Also included are two machined aluminum buttons (as opposed to resin buttons as you see in most of the ones out there).
I'm offering the agonizer in two versions:
Finished Agonizer prop - $85 (plus shipping) / with holster clip - $90 (plus shipping)
As pictured above! Sanded, finished, painted, and buttons attached. Ready to use on hapless Mr. Kyle! Clip pic coming soon!
Agonizer kit - $55 / with holster clip - $60 (plus shipping)
As pictured below. Will take about 10-15 minutes of sanding starting at 220 grit to 400 and 600 grit. You can go finer if you want. Then paint and glue in the buttons. Clip pic coming soon!
Includes:
Payment is via Paypal. PM me or email me if you want one and I'll send you an invoice.
tJ
UPDATE: I have 2 unfinished kits ready to go for anyone that wants them...PM me or email me if you want one.
*************************************************************************************************************************************************
I'm doing a run of agonizer props that I drew up in Solidworks and am producing on a resin SLA printer. The output on SLA printers is stunning, bettering even the best resin casts out there. You won't find build lines like you see on FDM printers. Finishing is easier than even the best resin cast kits. A few minutes with 2-3 grits of sandpaper each and you're ready to prime and paint.
I based mine off of the pictures of the original prop featured on Richard Coyle's web site "Yesterday's Future Tomorrows". I spent a lot of time tweaking it to get the measurements right. The "wings" are angled as in the original prop (a lot of re-casts are out there that were cast in open-face molds, thus didn't have this feature modeled correctly). I am really happy with the final product. Check out the pics here:
For your reference, here's Mr. Spock opening up a can of whoopass on Mr. Kyle in Mirror, Mirror:
And Chekov getting the same treatment from the Klingons in Day of the Dove:
My version comes in two pieces...the bottom body piece and the top red "button" piece. I did this so you won't have to tape off anything to paint the red button. Just paint it separately. I've keyed the body and the button so that the button easily attaches to the main body. You can glue it or not...it stays in place without glue. Also included are two machined aluminum buttons (as opposed to resin buttons as you see in most of the ones out there).
I'm offering the agonizer in two versions:
Finished Agonizer prop - $85 (plus shipping) / with holster clip - $90 (plus shipping)
As pictured above! Sanded, finished, painted, and buttons attached. Ready to use on hapless Mr. Kyle! Clip pic coming soon!
Agonizer kit - $55 / with holster clip - $60 (plus shipping)
As pictured below. Will take about 10-15 minutes of sanding starting at 220 grit to 400 and 600 grit. You can go finer if you want. Then paint and glue in the buttons. Clip pic coming soon!
Includes:
- top and bottom pieces printed on an SLA printer in resin
- top and bottom aluminum machined buttons
- optional clip
Payment is via Paypal. PM me or email me if you want one and I'll send you an invoice.
tJ
Attachments
Last edited:
