Severance

[RafalFett]

Here's Burt's O&D card with map:

The map is a vectorized variant from a screencap. made it as 90 x 50 mm.

I managed to recreate Gemma's photo torn apart by Mark from these photos:



The difference between the 2 versions is the enhancements used in Topaz Photo AI and some minor corrections (I kind of prefer v2). Made as 80 x 75 mm.

And 2 variants of the torn lines:

 

[Astyanax]

RafalFett, thank you once again for sharing all these! Can't wait to dive in!

You are a gentleman and a scholar.

 

[RafalFett]

Thanks for the kind words!

 

[Astyanax]

I aged the Gemma photo a little by adding a retro filter, along with some noise and grain:



And after printing, folding, tearing, taping, and wadding, I feel it came out pretty close!

 

[RafalFett]

It looks good, maybe a bit too well taped together; the ones in the show have more overlap and are slightly skewed.

 

[IlBarRamp19]

Finally, my new work station is set. They allow us to use our own devices here. Snacks are unlimited. They also gave me another copy of TYYA for free.

 

[renaissance_man]

Blank

 

[RafalFett]

Actually there is a thread in the Screen Used and Costumes Props section for these kind of posts ==> Lumon props from Severance on AppleTV+, but thanks for posting.

 

[RafalFett]

More photos, with the usual Topaz Photo AI treatment:

Made as 133 x 195 mm.


Made as 60 x 103 mm.
Note that you can buy existing photo paper with that back design:


I have finished the map, but it is in no way a perfect replica because there are areas that are not clearly visible, so I had to guesstimate/improvise the missing info:

These files are not at full resolution, but good enough to inspect them (for the moment I will not share them at hi-res). These are close to an A3 paper in size, more exactly 260 x 351 mm.

 

[vanessaparody]

More photos, with the usual Topaz Photo AI treatment:
View attachment 1914733 View attachment 1914734 View attachment 1914735
Made as 133 x 195 mm.

View attachment 1914736 View attachment 1914737 View attachment 1914739 View attachment 1914740 View attachment 1914742 View attachment 1914741
Made as 60 x 103 mm.
Note that you can buy existing photo paper with that back design:
View attachment 1914743

I have finished the map, but it is in no way a perfect replica because there are areas that are not clearly visible, so I had to guesstimate/improvise the missing info:
View attachment 1914745 View attachment 1914744
These files are not at full resolution, but good enough to inspect them (for the moment I will not share them at hi-res). These are close to an A3 paper in size, more exactly 260 x 351 mm.

Amazing work.

 

[RafalFett]

Thanks!

 

[Astyanax]

Truly awesome, thank you!

 

[RafalFett]

Thanks, and you're welcome!

 

[RafalFett]

Just finished Petey's niece card with envelope for Mark:


Everything you see was made from scratch. The card is 253 x 180 mm (or 127 x 180 mm closed - this is a standard 7 x 5 inch card). The full envelope would fit an A3 paper or 2 A4 paper for the body and the flaps. The difference between the outside and inside parts is the existing glue strip on the upper flap's lip (for the inside). The envelope is 185 x 135 mm fully closed. I did a quick search for 7 x 5 inch burgundy envelope on the net, but none of the results had the correct flaps (especially the bottom one).

 

[RafalFett]

Helly's post it message:


Made as 100 x 100 mm.

 

[renaissance_man]

Helly's post it message:
View attachment 1915609 View attachment 1915610 View attachment 1915611

Made as 10 x 10 mm.

Got a feeling you might mean 100mm x 100mm there.
Still, great work on the Post-It note.

 

[RafalFett]

Got a feeling you might mean 100mm x 100mm there.
Still, great work on the Post-It note.

You are right, that's what I meant to say. Corrected the previous post.

 

[Astyanax]

I have a special request for RafalFett , since you're so good at the cleanups!

Would you consider making a high-res "The Grim Barbarity of Optics and Design" painting, from s01e05? I think with the right software and skill it can be perhaps blown up?

I took the liberty of capturing all the sharpest and broadest 4K screenshots I could find, plus all the closeups.



Please keep in mind that some of these caps are from "The Macrodata Refinement Calamity" painting, where the badge colors have been reversed.

I checked on the proportions; I believe the printed version is 11" x 17" (standard "Ledger" size), and the canvas is either 24" x 36" or 20" x 30", which are both popular US sizes. I can't really tell for sure, but my strongest guess is that it's the bigger size:



Thank you for considering!
Bill

 

[RafalFett]

I'll see what can I do with the painting.

 

[RafalFett]

Used my own screenshot with the painting hold by Dylan:

I removed Dylan's hands and top of the head, corrected the perspective and upscaled it with a slight enhancement in Topaz Photo AI. The painting printed on paper is cropped at the perimeter (it's not the whole image):


I used the full painting...

... to recreate the printed paper with the card colors inverted:


Download the hi-res files from here ==> The Grim Barbarity of Optics and Design.png and here ==> The Macrodata Refinement Calamity.png.

The dimensions are made to those approximated by Astyanax (I'm sure these are pretty close), more exactly the painting is 915 x 610 mm (or 24 x 36 inch), while the printed variant is 432 x 280 mm (or 11 x 17 inch).