Interest ROTJ Han Solo Blaster Scope - Machined Aluminum

[Corellianexports]

I finished drilling the holes for the rivets and I found several of the correct size rivets, which I will include with the front sections.

I need to machine the front holes for the tips tomorrow night and then these will be done. I will post a photo of a sample front section with a price at that time.

 

[Corellianexports]

The parts are ready. Please see photos in my original post. The price will be $63 per front section. $5 for domestic shipping.

You can send Paypal here: corellianexports@aol.com

Just put "ROTJ Scope - Front Section" in the message section. Thanks.

 

[DarthWilder]

Is the waffle tip in brass?

 

[Corellianexports]

The waffle tip is in resin. If any one wants one in brass, I can machine them at $10 each.

 

[redbutton]

ok questions - I would like to put the rivet in myself - is this possible?
I would also like the front to be deep enough to put the scope in deep enough
to use the rivet to hold it in - is this possible? It doesn't look deep enough to do
this...???

 

[Corellianexports]

ok questions - I would like to put the rivet in myself - is this possible?
I would also like the front to be deep enough to put the scope in deep enough
to use the rivet to hold it in - is this possible? It doesn't look deep enough to do
this...???

One reason why the hole doesn't go through more than 50% of the way through the scope is due to cost. The hole is deep enough for the scope to be JBWelded.
Now, I can machine that hole deep enough to use the rivet, but I would have to charge more than $63 for the part.

 

[Solos blaster]

I'm an idiot for not asking before, but is the little waffle section the tip, included, or for purchase separately?

 

[Corellianexports]

The waffle tip (resin) is included.

 

[Solos blaster]

since I'm just in for the front piece and the knurled tip, how much would they be(machined)?

 

[Corellianexports]

Just the knurled part and the tip with resin waffle part is $23.

 

[Solos blaster]

I would like the waffle tip(sorry for the confusion in terms lol), machines as well, do you need a specific number to get those done or are you able to have machined by order too?

 

[Corellianexports]

I can machine one for $10. Did you want it in brass or aluminum?

 

[Solos blaster]

Let’s go brass. Payment sent.

 

[Corellianexports]

I see it. I will let you know when this is ready. Thanks.

 

[Corellianexports]

I will be machining the tip part today.

 

[Corellianexports]

I still have a cap parts available.

 

[Corellianexports]

I just got a request to make these parts for the ROTJ scope, so I'm checking to see if anyone else was interested in these parts.