Need suggestions on removing modeling clay

[Murdoch]

I guys, I have a 3d printed helmet that I thought I would modify with modeling clay. Now that I am trying to remove the clay, I am getting some resistance in doing so. I've used a knife to remove the bulk of the clay, but I just can't get in certain crevices. Can I use a acetone or something along that line where I can remove the clay and at the same time not damage the 3d printed parts? Thanks very much in advance...

 

[cavx]

If you printed in ABS, DO NOT use acetone.

Sent from my SM-G900I using Tapatalk

 

[clonesix]

I believe Lacquer Thinner will dissolve the clay and leave the printed parts alone. Be sure to test on a small piece of printed material FIRST!

 

[Predatoj]

Yes do not use acetone or alcohol. They are good for removing ink or paint. You need turpentine or white spirit.

 

[Jmen]

Maybe heat it a little bit? :confused

 

[cavx]

Is the modeling clay water or oil based?

 

[Murdoch]

Is the modeling clay water or oil based?

This is it NSP medium

 

[cavx]

I use plasticine myself on mold walls and I am sure metho melts it and should not affect the print.

Sent from my SM-G900I using Tapatalk

 

[OdiWan72]

turpentine!

 

[Murdoch]

turpentine!

I picked up Bio-natural turpentine. Gonna try sample piece tonight.
Like to thank everyone who made suggestions on this topic...

 

[Murdoch]

Turpentine works excellent for this. Thanks a ton guys...