My Daredevil Stick (real metal all functional)

reididtenroc

Well-Known Member
Hello i have worked on a real/functional Daredevil cane !

Works real like a blind cane, and works realy like Daredevil's stick !

All parts are in metal (steel for nunchuk part, and steel cable) and aluminium pipe for the grapling part !

All the parts are fixed with strong neodym magnets inside the differents pipes !

https://lh3.googleusercontent.com/-...AAGI/hfARUGTbsvQ/s720/IMG_20120331_174601.jpg

https://lh5.googleusercontent.com/-...AAGY/GgE2z8wZX3o/s800/IMG_20120331_174633.jpg

https://lh4.googleusercontent.com/-...AAGM/Zn9Z2P1VtUg/s800/IMG_20120331_174705.jpg

https://lh6.googleusercontent.com/-...AAGg/fwI8lukDzeo/s800/IMG_20120331_174901.jpg

https://lh6.googleusercontent.com/-...AAGs/oU7jCnDnpXY/s720/IMG_20120331_174928.jpg

https://lh3.googleusercontent.com/-...AAGo/w0umwpPfhjE/s720/IMG_20120331_175123.jpg

Cost approximatively 100 $, for neodyme magnets, pipes, glue, etc ..

Four weeks from conception, to finish the paint ! Approx 10 hours, real work.
 
Last edited:
Re: My Daredevil Stick (real metal all fonctionnal)

Thats all in one stick? That is way cool!

Yes it's a cane, in four differents parts (pipes) Two on the lower part in steel (for nunchuk, stronger than aluminium pipe) and the two others are for the grapling.

One for the rope and the spring system (to push the grappling outside the pipe), and the second is for the folding grapling in the closed position!
 
Last edited:
This thread is more than 12 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top