Kylo Ren Saber hollow hilt for electronics
- Thread starter guabe
- Start date
dday
Electronics list:
Led: http://www.thecustomsabershop.com/RedRedWhite-Cree-XP-E2-CopperNova-P1014.aspx
Led lense:http://www.thecustomsabershop.com/18deg-Tri-RebelCree-Star-Lens-P778.aspx
Led holder: http://www.thecustomsabershop.com/MHS-Heat-Sink-V3-P782.aspx
Resistor for led: http://www.thecustomsabershop.com/15ohm-5w-resistor-P13.aspx
sound board: http://www.thecustomsabershop.com/Nano-Biscotte-Sound-Module-V2-P806.aspx
Speaker and battery holder: http://www.thecustomsabershop.com/MHS-speaker-mount-V6-For-28mm-Speakers-P892.aspx
Speaker: http://www.thecustomsabershop.com/2W-28mm-Bass-Speaker-P662.aspx
battery: http://www.thecustomsabershop.com/T...400mAh-18650-Lithium-Battery-2-pack-P517.aspx
other options:
Led option 2: http://www.thecustomsabershop.com/Red-Cree-XP-E2-CopperNova-P1001.aspx (single color)
Led lense for option 2: http://www.thecustomsabershop.com/Collimator-Lens-87-deg-viewing-angle-P537.aspx
sound board option 2:http://www.thecustomsabershop.com/Petit-Crouton-Sound-Module-V35-P893.aspx
battery pack: http://www.thecustomsabershop.com/74v-Li-ion-2600mAh-18650-Battery-Pack-P699.aspx
battery pack option 2: http://www.thecustomsabershop.com/74v-Li-ion-1400mAh-18500-Battery-Pack-P758.aspx
I might be missing some details
Andymac84 I already printed at home one and im getting one from shapeways next week, its almost done so should ship this week.
Thanks.
Electronics list:
Led: http://www.thecustomsabershop.com/RedRedWhite-Cree-XP-E2-CopperNova-P1014.aspx
Led lense:http://www.thecustomsabershop.com/18deg-Tri-RebelCree-Star-Lens-P778.aspx
Led holder: http://www.thecustomsabershop.com/MHS-Heat-Sink-V3-P782.aspx
Resistor for led: http://www.thecustomsabershop.com/15ohm-5w-resistor-P13.aspx
sound board: http://www.thecustomsabershop.com/Nano-Biscotte-Sound-Module-V2-P806.aspx
Speaker and battery holder: http://www.thecustomsabershop.com/MHS-speaker-mount-V6-For-28mm-Speakers-P892.aspx
Speaker: http://www.thecustomsabershop.com/2W-28mm-Bass-Speaker-P662.aspx
battery: http://www.thecustomsabershop.com/T...400mAh-18650-Lithium-Battery-2-pack-P517.aspx
other options:
Led option 2: http://www.thecustomsabershop.com/Red-Cree-XP-E2-CopperNova-P1001.aspx (single color)
Led lense for option 2: http://www.thecustomsabershop.com/Collimator-Lens-87-deg-viewing-angle-P537.aspx
sound board option 2:http://www.thecustomsabershop.com/Petit-Crouton-Sound-Module-V35-P893.aspx
battery pack: http://www.thecustomsabershop.com/74v-Li-ion-2600mAh-18650-Battery-Pack-P699.aspx
battery pack option 2: http://www.thecustomsabershop.com/74v-Li-ion-1400mAh-18500-Battery-Pack-P758.aspx
I might be missing some details
Andymac84 I already printed at home one and im getting one from shapeways next week, its almost done so should ship this week.
Thanks.
Last edited by a moderator:
dday
Sr Member
Nice, thanks for the list!
They look to be out of the lens holder and sound boards.
To clarify, are you going to offer these yourself here as resin casts, or you've made the designs and we should order them through shapeways? Is there a 3rd option to self print?
I'm very interested and would love to see what the one you get ends up looking like.
mvanwalks421
Well-Known Member
These might help introduce you to TCSS (it helped me get started a few months back for mine)
Last edited by a moderator:
Thanks I am having trouble finding the right soundboard as its currently out of stock. I might have to opt for another one.
In any case any board should work.
by the way, i have been asked why I made the saber sub 11 inch, I mostly based my design size considering this image
if i take a large size hand since Adam Driver is not Prowse sized I asume his hand grip would be around 4 inches so it equates to this:
I might be mistaken but in that image it does not look like its a large hilt to me.
In any case any board should work.
by the way, i have been asked why I made the saber sub 11 inch, I mostly based my design size considering this image
if i take a large size hand since Adam Driver is not Prowse sized I asume his hand grip would be around 4 inches so it equates to this:
I might be mistaken but in that image it does not look like its a large hilt to me.
mvanwalks421
Well-Known Member
"THE FORCE AWAKENS - THE DARK SIDE" by "LORDBLAKO" is a good one, assuming that wasn't the one you were looking at.
Last edited by a moderator:
Chicagovader
Sr Member
Well Adam Driver is 6'3" so while not Prowse size not small by any means.
oreolover
New Member
Do you or anyone else watching this thread have experience using the Neopixel LED strips? I'm curious which microcontroller/sound board combo people have had luck with.
dday
Sr Member
Judging from his build I would say he has a size 11 glove. These tall, lanky guys generally hand large hands (I know, I'm one of those guys). This would put a size 11 at 4.3inch across the palm. But this is just my thoughts.
Also something to keep in mind, the 3D prop might be 1 of many versions of the saber. We know it was likely a stunt version as it seems to be cast and molded due to the seam lines.
I love that you're making this with the innards to easily fit the saber parts from TCSS, with screwing plates, built in lens shelf and so on, it really ups the value of the item.
levallois
New Member
That's funny I did the same thing yesterday, but in cm (French unit of measurement).
cm :
and Inch conversion (this morning):
Similar threads
