JFcustom
Sr Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
Injustice - Deathstroke Helmet - JFC foam.pdo
Injustice - Deathstroke Helmet - JFC foam.pdo
JFcustom's FOAM files
- Thread starter JFcustom
- Start date
Dadpool
Active Member
Re: FOAM speed building files'n'tricks ►omarbou1 IM-mk7 helmet◄ added
hey bro.... you can get plastidip from some bunnings and masters stores... I found masters were cheaper and sometimes bunnings don't stock it, you may have to try a few stores.
hey bro.... you can get plastidip from some bunnings and masters stores... I found masters were cheaper and sometimes bunnings don't stock it, you may have to try a few stores.
Duo Monkey
Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
So I'm making the foam Loki Helmet. It's together fine but what should I coat it with so it can smoothed and I can cut in line detail?
So I'm making the foam Loki Helmet. It's together fine but what should I coat it with so it can smoothed and I can cut in line detail?
DatManRogee
Active Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
That deathstroke looks dope!
That deathstroke looks dope!
Dadpool
Active Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
um? that's been up for 16 hours? how the hell did you do that!?!?!
um? that's been up for 16 hours? how the hell did you do that!?!?!
Durkness
Well-Known Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
Cheers!
He sent it to me a couple hours earlier....You can say I help verify some of his unfolds. Just make sure you check the model since some of the pieces are overlays. I would leave out the smallest piece for the eye too.
Cheers!
prostheticsoul
Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
awesome! can you upload more pictures to see more details ?
awesome! can you upload more pictures to see more details ?
Durkness
Well-Known Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
The eye section was tight... you can see the slop on the right side of the first picture. I use some tweezers to clean up the glue mess when I have run overs after I primer.
Hope this helps ya. :thumbsup
The eye section was tight... you can see the slop on the right side of the first picture. I use some tweezers to clean up the glue mess when I have run overs after I primer.
Hope this helps ya. :thumbsup
Attachments
prostheticsoul
Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
And this is done with 6mm eva foam ?
And this is done with 6mm eva foam ?
JFcustom
Sr Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
Iron Man Extremis v2 - foam unfold JFcustom.rar
You can consider it as the extention of the multi-hero cowl shared earlier. This suit is very permissive and it only needs your imagination to be tuned into almost whatever you want.
Have a look at Durkness's thread -> here <-
-----
Nothing to do with it, but I'd like to add a spoiler :
Iron Man Extremis v2 - foam unfold JFcustom.rarYou can consider it as the extention of the multi-hero cowl shared earlier. This suit is very permissive and it only needs your imagination to be tuned into almost whatever you want.
Have a look at Durkness's thread -> here <-
-----
Nothing to do with it, but I'd like to add a spoiler :
Last edited:
JFcustom
Sr Member
Re: FOAM speed building files'n'tricks ►DeathStroke helmet◄ added
:$
-----
To answer everyone at once, here is the difference between the two versions of Iron Man Extremis that you can find on this topic :
IM Extremis v1
IM Extremis v2
Here, v1 and v2 doesn't mean one is the improvement of the other. They both come from two different Marvel videogames.
do you know how much we love you JF?
:$
-----
To answer everyone at once, here is the difference between the two versions of Iron Man Extremis that you can find on this topic :
IM Extremis v1
Here, v1 and v2 doesn't mean one is the improvement of the other. They both come from two different Marvel videogames.
rockhopper
New Member
Re: FOAM speed building files'n'tricks ►IM Extemis v2◄ added
Hi JF, really loving your work!
I'm having trouble finding suitable foam for my 1st project
My local craft shop has lots of coloured foam, but its only 2mm thick and A4 szied.
I have found online suppliers of larger sheets, but it seems to only come as black or grey and i'm not sure if its the correct foam, which is EVA i beleave?
Is depron foam suitable?
Or how about this?
FULL SIZE SHEET ( 94" x 80" ) IN VARIOUS THICKNESS'S | Ace Foam
I'm based in the UK so really need a UK supplier
Many Thanks
Rockhopper
Hi JF, really loving your work!
I'm having trouble finding suitable foam for my 1st project
My local craft shop has lots of coloured foam, but its only 2mm thick and A4 szied.
I have found online suppliers of larger sheets, but it seems to only come as black or grey and i'm not sure if its the correct foam, which is EVA i beleave?
Is depron foam suitable?
Or how about this?
FULL SIZE SHEET ( 94" x 80" ) IN VARIOUS THICKNESS'S | Ace Foam
I'm based in the UK so really need a UK supplier
Many Thanks
Rockhopper
AvengerDr
New Member
Re: FOAM speed building files'n'tricks ►IM Extemis v2◄ added
Asda sells this camping mat which according to the description is made out of EVA foam and is 6mm I believe. I bought it last weekend but have not yet used it. I was awaiting the rest of my supplies to start my first project. I should be able try tonight.
Asda sells this camping mat which according to the description is made out of EVA foam and is 6mm I believe. I bought it last weekend but have not yet used it. I was awaiting the rest of my supplies to start my first project. I should be able try tonight.
Re: FOAM speed building files'n'tricks ►IM Extemis v2◄ added
I know a lot of you guys are using plasti dip or some similar product to coat your foam pieces, and it looks great. But the armor my brother and I will be building needs to be hard and not flexible. Will coating the finished armor pieces in resin or a rondo mix be possible or recommended?
I know a lot of you guys are using plasti dip or some similar product to coat your foam pieces, and it looks great. But the armor my brother and I will be building needs to be hard and not flexible. Will coating the finished armor pieces in resin or a rondo mix be possible or recommended?
