ironman mark III costume (W.I.P) ñew cardboard chest

[Finhead]

Re: ironman markII or III? costume (W.I.P)

ok in that case will fit perfect then how do you join the back?

However you wish, we use rare earth magnets. Works great

 

[scorpion]

Re: ironman markII or III? costume (W.I.P)

However you wish, we use rare earth magnets. Works great

thanks mate!!!thumbsup was a little lost with this :rolleyes

 

[scorpion]

Re: ironman markII or III? costume (W.I.P)

ok guys so here we go!!!

finished resin the helmet i cutted the bottom part but is a bit small:cry
i've printed the file in letter but i have a4 on muy printer. from letter to a4 there is difference? i'm a bit lost here. i've measured the helmet and is not the same scale that is on pepakura!!!confused
any ideas??

 

[scorpion]

Re: ironman markII or III? costume (W.I.P)

ok guys this is my second attemp both helmets are from sharkhead the left one was too small :behaveso i made the hd with the correct scale next step resin & bondo

 

[scorpion]

Re: ironman markII or III? costume (W.I.P)

helmet and neck ready

 

[scorpion]

Re: ironman mark III costume (W.I.P)

just finished the chest and back now i will start with the bondo :wacko

 

[RoboReiko]

Re: ironman mark III costume (W.I.P)

Anyone know of someone selling a IronMan costume? PM me if so

 

[scorpion]

Re: ironman mark III costume (W.I.P)

Anyone know of someone selling a IronMan costume? PM me if so

check on the junkyard :thumbsup

 

[stevo]

Re: ironman mark III costume (W.I.P)

impressive work

 

[scorpion]

Re: ironman mark III costume (W.I.P)

i've applied a coat of bondo, a cutted the face plate now comes the sanding and details:wacko:wacko

 

[scorpion]

Re: ironman mark III costume (W.I.P)

hi guys updating some work, i've been sanding as a devil:lol i hope next week will be finished:thumbsup

 

[scorpion]

Re: ironman mark III costume (W.I.P)

guys some pics of the helmet i need some help with the mold, i don't know how to start i will use silicone rubber but i can't find a tutorial any advice?:wacko

 

[scorpion]

Re: ironman mark III costume (W.I.P)

2742 views comments? sorry guys but i can't keep posting without comments is ridiculous

 

[Leander]

Re: ironman mark III costume (W.I.P)

my helmet has the back still attached but I cut the jaw off..
might be an idea for you if your helm still doesn't fit.

the sanding looks good, details are the hardest part though good luck with that.

 

[sgtski]

Re: ironman mark III costume (W.I.P)

Are you thinking ahead for the molding or are you going to mold it as it is in the last set of pics? It looks awesome but needs some detail lines cut in. If you search the net for smooth-on they have video tutorials on their page and youtube is full of people making molds of different types of helmets, especially Halo.

 

[Lord Magneto]

Re: ironman mark III costume (W.I.P)

The helmet is coming along great.

Did you do the face plate and helmet separately or all as one piece then cut out the face plate?

 

[scorpion]

Re: ironman mark III costume (W.I.P)

my helmet has the back still attached but I cut the jaw off..
might be an idea for you if your helm still doesn't fit.

the sanding looks good, details are the hardest part though good luck with that.

well i was thinking to cut the chin but i cutted the back part and fits perfect thanks for the advice!!

Are you thinking ahead for the molding or are you going to mold it as it is in the last set of pics? It looks awesome but needs some detail lines cut in. If you search the net for smooth-on they have video tutorials on their page and youtube is full of people making molds of different types of helmets, especially Halo.

yes i will make the mold as soon i finish the helmet is not ready needs lot of work:sick i will check smooth-on site:thumbsup

The helmet is coming along great.

Did you do the face plate and helmet separately or all as one piece then cut out the face plate?

i've cut the face plate after the resin coat then i work over the plate

thanks for the comments:thumbsup

updating work!!! i am still working over the ears and the bottom part first i made a silicone mold i used silicone tube

yeahhhh first cast:$

 

[Finhead]

Re: ironman mark III costume (W.I.P)

Helmet is starting to take shape nicely. Two questions though, why not cut the bottom back section out? And why such deep grooves in the top?

 

[DragginBowtie]

Re: ironman mark III costume (W.I.P)

Looking good. Liking the attention to detail.

 

[Lord Magneto]

Re: ironman mark III costume (W.I.P)

you are making me want to start up an iron man helmet project ugh