Iron Man

I sent the Jarvis work out to be developed by walgreens in a 8 x 10 and found a nice thin picture frame at target today. Once i get it all set in the frame i can start looking for ways to make the knob.
 
predpaul said:
It would be quite easy to print on a transparency and be back lit. I'll look into it. Could get a run of these going if I can find the materials, really need to find that memo stand :confused

Paul .'.
Click to expand...

I will send this image over to the company that did all my vehicle wraps of ironman on my car and have them print thoes on some clear vinyl. I need to go get some plexie at the depot tomorrow. should be fun.
 
MARK2 said:
I sent the Jarvis work out to be developed by walgreens in a 8 x 10 and found a nice thin picture frame at target today. Once i get it all set in the frame i can start looking for ways to make the knob.
Click to expand...

Jarvis work? Mine isn't finished yet, isn't it best to wait until I get all the elements done first? :confused

Paul .'.
 
MARK2 said:
I just sent in the one my friend did. I am waiting on your master piece.:thumbsup
Click to expand...

It's nearly done. It may go to the Junk Yard because I completely changed it from the original that I got from here and have put in over 40 hours work inbetween my day job and would like something back.

Won't be expensive though an exclusive price for RPF members guaranteed and will be available as a digital download. I still need to find out what the missing text says I'm enhancing my screencaps to find out. :cool


jarvis.jpg



Paul .'.
 
Last edited by a moderator:
predpaul said:
I still need to find out what the missing text says I'm enhancing my screencaps to find out. :cool
Click to expand...

I took some Blu-Ray screencaps. You can make out some of the other text.

I'll list it cause for some reason, my image uploader keeps crashing. I'll try and post the pic(s) later.

Top left:
MAD MONEY
CNBC 145 TIME REMAINING 15:18

Top right:
10:04
SUNNY
HIGH 91 LOW 52 MAY 4, 2008

Middle right, top section:
REMAINING STORAGE
5.4 TB

Video section:
CONNECTED
RECORD VOLUME
SAVE MUTE
CANCEL VIDEO

COMMUNICATIONS
PEPPER
HOW BIG ARE YOUR HANDS?
WHAT?

Bottom left:
BATTERY
42.7 HRS
42.7 HRS

Window above that:
EMAIL & IM TOOLS
CONTACTS SETTINGS

Middle right, bottom section:
PERSON
TONY STARK
CEO STARK INDUSTRIES

LOCATION
SECTION 4 BAY C


By the way, I hope you don't mind some (hopefully constructive) observations, but I noticed a couple of things about your design. Firstly, on the actual screen-prop, there's a slight curve to the left of "TONY STARK" whereas yours is straight. Also the bit at the top right with the ^ and v arrows is a bit thinner on the screen prop than yours.

Hope the text helps :) This is a great project. I also took a cap of the base of it, you can see it when Pepper puts down her laptop to go and help Tony. I'll post that too.

EDIT:
Here are the pics. Frakking thing finally worked. Some of the text may seem unclear from the cap but what I wrote above is correct, I did some tweaking with photo editing software on each section. I just posted the original caps as I didn't keep the tweaked ones.

Actual screen:


Base:
 
Last edited:
firefly827347 said:
I took some Blu-Ray screencaps. You can make out some of the other text.
Click to expand...

Thanks so much Firefly. I changed the size of the tv player ^ control and a few others before I read this post, great minds eh!

I'm going to add all the new info to it now :cool

JarvisPad-preview3.jpg


Paul .'.
 
firefly827347 said:
By the way, I think I identified the font that was used, it's called FF Din. :)
Click to expand...


Thanks DAFONT yeah? I was using Arial Rounded.

I think somebody might be getting a hi res copy for FREE in the very near future :cool

Paul .'.
 
predpaul said:
Thanks DAFONT yeah? I was using Arial Rounded.

I think somebody might be getting a hi res copy for FREE in the very near future :cool

Paul .'.
Click to expand...

I discovered it using a great site called Identifont.
It is a font you have to pay for, however I managed to find a free copy without much searching...:rolleyes
 
firefly827347 said:
Yep! But I'll PM you it.
If anyone else wants it, let me know.
Click to expand...

Cool PM recieved.

OK folks time for the unveiling ....I'm sure there's a drumroll in there somewhere :lol

I present to you...after 40 hours of font searching, screencapping, emailing, headaches, panic attacks, stress outs, researching and help from you guys...

The Jarvis Pad paper/plastic prop.

31067_440641250080_567675080_5862040_230687_n.jpg


Hi res is going to be available in the junkyard (when I can post there) :lol

Here's a sneaky peak of the resolution




Thanks to everyone for helping get this as accurate as possible and I am still open for any suggestions to make it better. :)

Paul .'.

p.s the area where the dial goes is going to be left for when we finally get one of them made :confused
 
Last edited by a moderator:
IronManiac said:
I KNOW that CafePress won't print this. They're very strict on reproducing copyrighted designs and intellectual property. They cover their *** to avoid lawsuits.

I'm pretty certain that Marvel would stop any sales of big prints, even if i sold them here on the JY. Someone told me they police the forums, which is understandable.
Click to expand...

www.zazzle.com
 
You must log in or register to reply here.

Similar threads

R
  • Sale
Marvel Beast Kingdom Iron Man Mark 50 Battle Damaged Helmet
Replies
5
Views
660
rebelranger
R
paxtoprime94
“FABRIC” IRON MAN SUIT? (Fabric-covered foam?)
Replies
2
Views
527
Kolin86
Kolin86
paxtoprime94
Best ways to attach/cover foam with fabric?
Replies
3
Views
425
masterjedi322
masterjedi322
paxtoprime94
Idea for Iron Man Suit that you can step right in/out of
Replies
1
Views
435
renaissance_man
renaissance_man
RafalFett
The Master (2012)
Replies
3
Views
683
RafalFett
RafalFett
Back
Top