BadBoyHouse
Member
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
Awesome work. Cheers also to Bimmer for the links to the pep files.
Awesome work. Cheers also to Bimmer for the links to the pep files.
Iron Man Helmet Project - NEW PICS
- Thread starter Graphic Jordan
- Start date
mushroomhunter
Active Member
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
I finished cutting out the Sharkhead/dubean one yesterday, and just finished the face today. But this one looks awesome. Looks like I have to start cutting out some pep again.
BTW, the your pepakura helmet looks sic!!!
I finished cutting out the Sharkhead/dubean one yesterday, and just finished the face today. But this one looks awesome. Looks like I have to start cutting out some pep again.
BTW, the your pepakura helmet looks sic!!!
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
Thanks for all the kind words fellow RPF brothers. I hope that the resin/glassing/fixerupping goes well. I plan on casting it in resin.
Thanks for all the kind words fellow RPF brothers. I hope that the resin/glassing/fixerupping goes well. I plan on casting it in resin.
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
Yes it is. It has everything single detail. Grooves along crown, octagon on the chin, layered eyes, cheek grills. EVERYTHING! It is worth the time it takes to build.
Yes it is. It has everything single detail. Grooves along crown, octagon on the chin, layered eyes, cheek grills. EVERYTHING! It is worth the time it takes to build.
Damn cool man, Sharkhead's pep file is really HD
still waiting for the next update
Dung0beetle
Well-Known Member
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
I'll see if I can sharpen the lines on it, they don't show up well.
Here is the pdf file. http://s2.sigmirror.com/files/82048_9ydoe/Sharkmark VI-IronMan-Helmet-UnfoldedbyDubean33.pdf
I'll see if I can sharpen the lines on it, they don't show up well.
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
I threw the helmet on top of a neck seal I have yet to finish just to see how it fit. I think it looks great. I cannot wait to finish this helmet. I will be casting after that.
I threw the helmet on top of a neck seal I have yet to finish just to see how it fit. I think it looks great. I cannot wait to finish this helmet. I will be casting after that.
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
Does anyone have a contact for Sharkhead? Since the 405th is down I have no way to get ahold of him.
Does anyone have a contact for Sharkhead? Since the 405th is down I have no way to get ahold of him.
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
I believe I answered this earlier in this thread. I honestly can't be sure. I work 9-5 through the week and my weekends are usually busy. But I put a good 3 weekends into it.. maybe 4-5 hours each day. I really took my time and folded/cut and glued everything with the utmost precision. I really want the casting to be perfect and I really want to save time having to reshape after sanding etc. Pictures don't do it justice. It looks must better in person.
I believe I answered this earlier in this thread. I honestly can't be sure. I work 9-5 through the week and my weekends are usually busy. But I put a good 3 weekends into it.. maybe 4-5 hours each day. I really took my time and folded/cut and glued everything with the utmost precision. I really want the casting to be perfect and I really want to save time having to reshape after sanding etc. Pictures don't do it justice. It looks must better in person.
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
Hey guys. I made some progress this weekend. Here is what I did.
I resined the outside then slushed Smooth-On 300 in the inside. It made this bad boy hard as a rock. I can literally squeeze in on any given side with no bending. I also did about a cm thickness too so I can now sand and dremel on the outside without fear of "breaking through to the other side."
I managed to sand and primer, sand and primer quite a bit. I need to pick up a dremel so I can re-establish the groove lines that distinguish the faceplate, grooves in side and cheek details.. but most of them survived thus far.
I plan on casting this so I want to work on it till it is perfect. Let me know what you all think. I will keep updating as I work on it.
Hey guys. I made some progress this weekend. Here is what I did.
I resined the outside then slushed Smooth-On 300 in the inside. It made this bad boy hard as a rock. I can literally squeeze in on any given side with no bending. I also did about a cm thickness too so I can now sand and dremel on the outside without fear of "breaking through to the other side."
I managed to sand and primer, sand and primer quite a bit. I need to pick up a dremel so I can re-establish the groove lines that distinguish the faceplate, grooves in side and cheek details.. but most of them survived thus far.
I plan on casting this so I want to work on it till it is perfect. Let me know what you all think. I will keep updating as I work on it.
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
I will get those measurements to you tonight when I get outta work.
I will get those measurements to you tonight when I get outta work.
Re: Fully pepped Iron Man Helmet HD - Sharkheads Model
Made some progress on the body of the suit. Please remember I am most likely going to display this only.
I don't have a way to wear it while taking the photo so the photos are just the pepped pieces on my shelf.
I plan on augmenting the bicep so that both side are filled in so I can cast and make a copy for other arm.... and then dremel out the cut out areas for armpit area.
The only piece I can't do this too is of course the shoulder bell. I wish it were symmetrical.
Made some progress on the body of the suit. Please remember I am most likely going to display this only.
I don't have a way to wear it while taking the photo so the photos are just the pepped pieces on my shelf.
I plan on augmenting the bicep so that both side are filled in so I can cast and make a copy for other arm.... and then dremel out the cut out areas for armpit area.
The only piece I can't do this too is of course the shoulder bell. I wish it were symmetrical.
Similar threads
