Iron Man Costume from Puerto Rico 100% complete see photos page 11 (pepakura)

Re: Iron Man Costume from Puerto Rico (pepakura)

BenHA94 said:
*gasp* is the hot toyz photo the one i told you about at siwdat?
Click to expand...

Not sure Ben. I found a bunch of these a while back. That toy is so awesome. Can't seem to find any of them under $300 though. Darn limited production! Just can't see paying that much or even more from what I have seen!
 
Re: Iron Man Costume from Puerto Rico (pepakura)

Wao this project is taking me too much time and effort, but i almost finish.
The torso is done, this was a pain in the butt, but i got it.:angry
just some little gaps that i have to seal ...
few more days i will put all the pieces to see how it looks....( i know how it looks but i need to fix some minor details first) then i will post the photos.
I just need to finish
1. the new helmet 75% done
2. Gloves 60%
3. need to fix calves area of the lower legs
4. more putty filler ,primer and sand to seal a lot pin holes and rough areas

And that's it, the complete armor will be on primer for one or two months until i get some cash :cry to paint it
 
Re: Iron Man Costume from Puerto Rico (pepakura)

Just a little update, fingers are basically done, few more days i will post more photos of the complete armor except the lower legs, they are under extreme fixing time.
 
Re: Iron Man Costume from Puerto Rico (pepakura)

Very nice progress Maulfett! I'm still assembling my pep helmet but I can't wait for mine to be in that stage of the process; fiberglass and bondo stage. Looking forward to seeing more of your work.
 
Re: Iron Man Costume from Puerto Rico (pepakura)

Thanks guys, i will post more photos of my IM progress very soon, I'm making some adjustment to the costume,
i finished the new lower legs, need bondo and primer, gloves are almost done, as soon as finish the lower legs i can put all the armor suit together and take photos...4 or 5 days it will be done on primer of course.:thumbsup
 
Re: Iron Man Costume from Puerto Rico (pepakura)

Hey Maulfett
It's unbelievable what you've done with pepakura stuff.
I think your work is very inspiring to many people to make their own suit.
Keep up the impressive work and let us take a part of it. :)
Very very nice !

regards
Mike
 
Re: Iron Man Costume from Puerto Rico (pepakura) 80% complete

Here some update, i had to fix some diferents area of the armor to make it more accurate and very looking too, i had been busy with other personal and economical situation that is why it is taking me more time to finish, i got a life :eek.
Like i said before i made a new helmet, you will see it on the photos.
I just need to finish the lower legs and the gloves. after that more bondo filler and few automobile primer coats, paint and lights.
Thanks for you support and good and bad comments too, all that motivate me
to continue with this amazing project.
Thanks.
 
Re: Iron Man Costume from Puerto Rico (pepakura)

holy crap this just keeps getting better. amazing work Maulfett. Is that sharkheads latest helmet?
 
Re: Iron Man Costume from Puerto Rico (pepakura) 80% complete

Bimmer said:
holy crap this just keeps getting better. amazing work Maulfett. Is that sharkheads latest helmet?
Click to expand...

Thank you guys, just wait when i finish the lower legs and the gloves looking @#$% great, few more days i will finish :lol, i had been almost five months, a lot work just by myself with no money. But right now i'm very happy.
Bimmer yes and no about the helmet it is a combination of sharkheads and the hd dubean33 v.2, i had to play with both helmet until i got right, there are not special pep files i'm using dancin files most of them, he did a good job, and thanks for that but most of them are little out of porpotion in that case i used my sculpt skill but instead of clay i used paper.
Did i write this info correctly? sorry for my broken english
 
Last edited:
Re: Iron Man Costume from Puerto Rico (pepakura)

Thanks guys, 3 or 4 days i will finish the new legs plus i did a little modification to the thighs, now the looks accurate. Photos very soon
 
Re: Iron Man Costume from Puerto Rico (pepakura)

Where did you download the pepakura files for your upper+lower legs , foot and the abs?
Thanks

BTW, I am using your ironman as my target!
 
Re: Iron Man Costume from Puerto Rico (pepakura)

check this thread you can find some of the dancin fool pep files, http://www.therpf.com/f24/looking-dancing-fool-ironman-pepakura-file-92123/
and in the 405th you can find more pep file from him and another menbers.
Remenber most of the pep files that i used i modified after i asambled and sometimes after fiberglassed, like the thighs right now i did not like them, so i cut and add paper here and there and fiberglass on them, like i said before, it is like sculping just with paper.
 
Re: Iron Man Costume from Puerto Rico (pepakura)

Here is a photo what i'm talking about it is like surgery, it is not a secret i'm using my scultping skill but with paper, cardfoam and tape..there are not a perfect pep files, they are very accurate, but most of them need to be modified if you want to make a almost replica suit.
For me and just me because it is a personal challenge i want to make this suit 90% or more on accurate or identical, 100% no ones cannot make it, aleast you have the originals molds, i just want to make the best i can.
That's it me.
Good luck if i can help you on something else let me know i will try my best.
 
Re: Iron Man Costume from Puerto Rico (pepakura)

The thigh file is damage and says "no data for development"
Could you upload them again.?
Thanks!
 
You must log in or register to reply here.

Similar threads

paxtoprime94
“FABRIC” IRON MAN SUIT? (Fabric-covered foam?)
Replies
2
Views
310
Kolin86
Kolin86
paxtoprime94
Idea for Iron Man Suit that you can step right in/out of
Replies
0
Views
229
paxtoprime94
paxtoprime94
dcast
Zombie Ironman helmet - Spiderman Far From Home/What If 3d print project
Replies
4
Views
1,613
dcast
dcast
Morgrimm77
Newbie member, and cosplay builder - first EVA Helmet
Replies
0
Views
714
Morgrimm77
Morgrimm77
paxtoprime94
Best ways to attach/cover foam with fabric?
Replies
3
Views
279
masterjedi322
masterjedi322
Back
Top