TK-2126_MD
Well-Known Member
I think its here in the thread somewere???
HP3 Marauders Map
- Thread starter division 6
- Start date
Fenris
Well-Known Member
If you're referring to the map I made, I think it's complete... but not the best, though. I just spliced and edited the pieces from screenshots of the Noble Collection map. I managed to find high-res shots and tried to "flatten" it out so some parts are kinda skewed.
As for the file, I have it in my harddisk, but I never hosted it. Another member did that. I tried hosting it on photobucket, but they resized it. It's around 9.63mb.
RaresFlynn
New Member
If it's from noble collection it's complete. Although the movie replica it's not complete, in HPB videogame the castle is huge! But it's good for a replica.
RaresFlynn
New Member
I can manage that!
RaresFlynn
New Member
Look what I've found: Marauders Map German by ~r0pe02 on deviantART
The problems are: it's not original, it's in german, it's not putted toghether.
The problems are: it's not original, it's in german, it's not putted toghether.
TK-2126_MD
Well-Known Member
well it is the Marauders Map after all, for all we know the map changes to the users main tongue 
Great find thanks!
Great find thanks!
RaresFlynn
New Member
In theory, yes it' should change in mother tongue, but the problem it's not the language, that can be learnd, the problem is that it's not assemblied and we need every piece and instructions to assembly the map!
Although I'm glad you like it!
Although I'm glad you like it!
RaresFlynn
New Member
I need your help please! I separated the map in 9 differrent pieces and I dimentioned the pieces after an A4 sheet, but I'm not sure if it will look good. Can you give me the corrcet dimensions?
division 6
Master Member
18"x56"
RaresFlynn
New Member
Thanks, but I still don't know how to print it out...
division 6
Master Member
Unless you have a printer that can do 18"+ it's going to have to be done by hand.
Each fold is 4" wide, the center is 8".
What I would do is section it out so I could print it in pieces my printer can do, than I would tape it all together, lay it over a light table (piece of glass with a light under it) then trace over it on a full sheet of parchment.
Light pencil outlines of all the rooms would work then go over those with the lettering in ink.
Lots of writing but the text just repeats for the most part.
The map is comprised of at least 3 sheets for just the main 3 layers.
Overall outer, inner and center, then all the smaller pieces for separate rooms and levels.
So you know what I am talking about I'd suggest watching the part near the end of PoA where it's on the table fully open then closes.
Each fold is 4" wide, the center is 8".
What I would do is section it out so I could print it in pieces my printer can do, than I would tape it all together, lay it over a light table (piece of glass with a light under it) then trace over it on a full sheet of parchment.
Light pencil outlines of all the rooms would work then go over those with the lettering in ink.
Lots of writing but the text just repeats for the most part.
The map is comprised of at least 3 sheets for just the main 3 layers.
Overall outer, inner and center, then all the smaller pieces for separate rooms and levels.
So you know what I am talking about I'd suggest watching the part near the end of PoA where it's on the table fully open then closes.
Fenris
Well-Known Member
I printed mine out on legal sized paper... and just glued them together.
Here's the link again to the file of the map I made:
http://api.cld.me/140L363E340H040N1F0C/Marauders_Map_by_Marko.jpg
...well, I hope it still works...
Here's the link again to the file of the map I made:
http://api.cld.me/140L363E340H040N1F0C/Marauders_Map_by_Marko.jpg
...well, I hope it still works...
Last edited:
RaresFlynn
New Member
Thats not A4 I'm gonna print it out on A4 Dimensions, I've dimensioned it in Photoshop!I printed mine out on legal sized paper... and just glued them together.
Here's the link again to the file of the map I made:
http://api.cld.me/140L363E340H040N1F0C/Marauders_Map_by_Marko.jpg
...well, I hope it still works...
Okay, check this out. I took my map into photoshop, had to reduce it down to 18" and whatever long, pieced it together, so it may be 56" long, and I took it to my local print shop, who can print "banners" which are 24" by however long you need it. Printed up a black and white version of the map, and detailed it myself. Painted over it with lemon juice, and cooked it in the over, making sure that none of the sides touched each other, and only had it at 100 degrees, kept checking it every 10 minutes, took about 45-50 minutes for it to turn brown, and another 10-12 minutes for it to get the darker brown that I wanted. Looks great.
Just my way of doing it, but I wanted to share that.
Just my way of doing it, but I wanted to share that.
Shadow
Member
lilpatty
Well-Known Member
Thymo
New Member
With this video you can make your (litle) marauder's map. very easy
YouTube - Broadcast Yourself.
Anyone know how you make a great one?
YouTube - Broadcast Yourself.
Anyone know how you make a great one?
Similar threads
