Interest Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D master/scan **HG print #44**

[TheRocketeer]

I have been working on these helmets for a bit.. super accurate Now they are in the Legends Of Tomorrow trailer ... I'll be finishing them off and getting them on the printer asap
These will be screen accurate helmets .as close as you can get without having the prop in your hands So Hawkgirl will be a smaller size...same size as the show.

I still haven't decided if it will be resin or a softer more flexible material.. I may give the option

They will be 1 piece helmets... unless after I finish printing it I have to make it multiple parts..never know

As I said the models are almost done..a few tweaks and they will get printed..if there is interest

The price will be $245-265usd...depending on material + shipping ...please post interest.

If there is enough interest I will print it..as soon as my printers are free..and go from there

Here are a couple shots screenshots if your not familiar with them..and renders

\

 

[reelprops]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Frakkin beautiful

Reel


Sent from my iPad using Tapatalk

 

[mackle89]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Awesome! Interested in Hawkman!

 

[JKRIB]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Interested in both

 

[TheRocketeer]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Thanks

Frakkin beautiful

Reel


Sent from my iPad using Tapatalk

On the list

Awesome! Interested in Hawkman!

Listed for both

Interested in both

 

[troopermatthew]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Interested in Hawkgirl

 

[TheRocketeer]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Sounds good on the list

Interested in Hawkgirl

 

[Kix]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Interested in at least Hawkgirl. I'd also like a Hawkman, but wary of size. I have a 25" noggin.

 

[MrDark]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

i might want one, and these look good..trust me,ive held the real one in my hands!

 

[TheRocketeer]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Yeah the helmet will be 24" max (i'll have to get exact measurements) .. as its based on the actual size of the helmet from the show

Interested in at least Hawkgirl. I'd also like a Hawkman, but wary of size. I have a 25" noggin.

thanks.. then you should know

i might want one, and these look good..trust me,ive held the real one in my hands!

 

[Kix]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Basically if I ever post in a helmet thread of yours, feel free to assume I'm making puppy dog eyes and hoping for 25".

But I'm hoping for the best.

 

[TheRocketeer]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

LOL ok.. probably will never make a 25" helmet..unless its the Star Wars stuff... I wanna wear it too and my head is 22.25"

Basically if I ever post in a helmet thread of yours, feel free to assume I'm making puppy dog eyes and hoping for 25".

But I'm hoping for the best.

 

[Max Jenius]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Interested in both. Do you think you can do these in cold cast?

 

[stevebarclay452]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

I would love to get a Hawkman one done in resin

 

[TheRocketeer]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Possibly, but they are kinda gold colour not silver.. maybe polish is and candy coat in gold? And I can do cold cast rubber..like my Star Lord patches

Interested in both. Do you think you can do these in cold cast?

It depends on how I make my mold..some molds are not made to come apart the way you need to for resin..All my cowl molds are like this..they are fused back together. The ones for the show are a flexible material..so if I'm going screen accurate...

I would love to get a Hawkman one done in resin

 

[stevebarclay452]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Whatever way you do it they will still be awesome

Sent from my SM-N9005 using Tapatalk

 

[TheRocketeer]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

I will make it as accurate as I can.. it should be close to 100% but more interest is better

Whatever way you do it they will still be awesome

Sent from my SM-N9005 using Tapatalk

 

[muttmo]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

I am interested in both..

 

[TheRocketeer]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Ok I'll put you on the list

I am interested in both..

 

[TheRocketeer]

Re: Hawkman and Hawkgirl from CW Legends of Tomorrow.. 3D printed master/scan

Bump for more interest need 10 for each..