Halo UNSC Weapons By Justinian
- Thread starter JUSTINIAN
- Start date
JoshuaKane
New Member
Here is a link to my WIP Assault rifle. The kit is very nice, and I had a blast putting it together.
http://www.therpf.com/f24/wip-unsc-ma5c-assault-rifle-justinian-kit-190443/
-- Joshua
http://www.therpf.com/f24/wip-unsc-ma5c-assault-rifle-justinian-kit-190443/
-- Joshua
Thank you. I actually already made a BR about 5 years ago. But I plan to rework some of the details. Hopefully later this year I will get it finished.
Thanks buddy.
Thank you both. There is a thread in the junkyard... somewhere. Or you could send me a PM.
Not an update, but a cool story. A good friend of mine had one of my assault rifles at SDCC, and was able to show it to Frank O'Conner. He was very impressed with it.
If you look closely, you can see that he is also wearing one of my Cortana chips.
It's time to jump start this thread back up with a bang.
I was planning on attending a costume contest this past Saturday, and I felt that I needed some sort of larger weapon, that would really grab attention. By mid week I couldn't think of anything, so I was just going to go with my rifle and pistol and hope for the best. Then Friday morning I had the idea, and I just couldn't resist building it.... A FLAMETHROWER.
I Spent the morning putting together a build list, and by lunchtime I was building. I drew up my blueprint and printed it out on vinyl.
I built the main frame out of PVC pipe.
I cut the back handle out of wood.
I had the basic structure put together by late afternoon.
Due to time constraints, I forgot to take pictures of the rest of the build. But here is the bare bones version that I took to the contest.
Now of coarse you are wondering what I used for the flame tip. It is a propane torch that I bought from Harbor Freight....
That's right. THIS THING WORKS!!!
Check out the video.
Due to time constraints, I wasn't able to add all of the details, but I plan to go back and finish them off soon. Overall I am very pleased with this 2 day build.
Also, I didn't win the contest, because there was a no fire rule. But if I was able to turn it on, i am sure I would have won. Oh well. This was a fun project.
I was planning on attending a costume contest this past Saturday, and I felt that I needed some sort of larger weapon, that would really grab attention. By mid week I couldn't think of anything, so I was just going to go with my rifle and pistol and hope for the best. Then Friday morning I had the idea, and I just couldn't resist building it.... A FLAMETHROWER.
I Spent the morning putting together a build list, and by lunchtime I was building. I drew up my blueprint and printed it out on vinyl.
I built the main frame out of PVC pipe.
I cut the back handle out of wood.
I had the basic structure put together by late afternoon.
Due to time constraints, I forgot to take pictures of the rest of the build. But here is the bare bones version that I took to the contest.
Now of coarse you are wondering what I used for the flame tip. It is a propane torch that I bought from Harbor Freight....
That's right. THIS THING WORKS!!!
Check out the video.
Due to time constraints, I wasn't able to add all of the details, but I plan to go back and finish them off soon. Overall I am very pleased with this 2 day build.
Also, I didn't win the contest, because there was a no fire rule. But if I was able to turn it on, i am sure I would have won. Oh well. This was a fun project.
Attachments
Last edited by a moderator:
Cerberus442
New Member
Helle...!!! very nice job...!!! lots of details...!!!
FireTeamSolstic
New Member
These are some of the best UNSC weapon props I have seen. Keep up the good work!
narutoishere
Well-Known Member
Very nice. Any plan to make Z250 lightrifle?
BIG UPDATE!
Halo 2 Anniversary was officially announced the other day. As a result I am going to be making the SMG. I am going to be making this at a very fast pace, but the quality and detail will be just as good as my previous weapons. And yes, I will be molding it.
First shot is my initial design.
And here are the first parts getting cut out on the laser.
More to come soon...
Halo 2 Anniversary was officially announced the other day. As a result I am going to be making the SMG. I am going to be making this at a very fast pace, but the quality and detail will be just as good as my previous weapons. And yes, I will be molding it.
First shot is my initial design.
And here are the first parts getting cut out on the laser.
More to come soon...
Well slight update. I started with the magazine. The base and the actual magazine will be separate.
The stock will be retractible. Here it is with the edges rounded.
For now the front grip will be movable. So here it is.
And the base of the gun. The hollow section is for the stock.
The stock will be retractible. Here it is with the edges rounded.
For now the front grip will be movable. So here it is.
And the base of the gun. The hollow section is for the stock.
There is only one size listed. Normal. 18.6 inches long, with the stock collapsed.
Last edited:
I did a bunch of fine sanding, and the parts are getting pretty smooth.
The magazine section is pretty much finished. It is perfectly smooth, and all of the details are done. I am pretty pleased with it.
And the rest of the gun pretty much smoothed out and primed.
Just a few more places that need to be smoothed out, and then it will be time for the ity-bity details. I am pretty pleased with the progress so far. I'll be working on the barrel and the sights very soon. If all goes well, this should be seeing some rubber early next week.
The magazine section is pretty much finished. It is perfectly smooth, and all of the details are done. I am pretty pleased with it.
And the rest of the gun pretty much smoothed out and primed.
Just a few more places that need to be smoothed out, and then it will be time for the ity-bity details. I am pretty pleased with the progress so far. I'll be working on the barrel and the sights very soon. If all goes well, this should be seeing some rubber early next week.
Similar threads
