Limited Run Graflex 2.0 and Crossguard saber run - sign up thread

[macman27]

Any update on possible shipping date?

 

[Samakin]

Any Updates yet on shipping?:confused

 

[Saberbay]

A reminder to everyone that I am selling a lilmited amount of 7/8" HeatSinks on etsy.

These are needed for the led install.

There is no other 7/8" heatsink on the market, Only 1"

These were designed to fit tri leds and optics.

Good for other parks 7/8" hilts also

https://www.etsy.com/listing/251392...y&ga_search_query=7/8" heat&ref=sr_gallery_22

 

[dday]

A reminder to everyone that I am selling a lilmited amount of 7/8" HeatSinks on etsy.

These are needed for the led install.

There is no other 7/8" heatsink on the market, Only 1"

These were designed to fit tri leds and optics.

Good for other parks 7/8" hilts also

https://www.etsy.com/listing/251392...y&ga_search_query=7/8" heat&ref=sr_gallery_22

Will you sell these outside of ETSY as well, then you save the fees?

 

[Saberbay]

Will you sell these outside of ETSY as well, then you save the fees?

No.
Selling them on etsy keeps it organized and allows me to fulfill the order faster.
I have a kylo ren helmet run of 55 a few saber commissions and over a hundred of these heatsinks to sell.

Putting them on etsy saves me lots of time communicating back and forth with customers answering questions like " How much?" "How much is shipping?" "Can i get a discount?" "when will you ship?" " do you have a tracking number?" "what leds are these for?"

I dont know if you have ever sold anything in mass quantities, but for me the 3.5% etsy charges is worth it.

 

[Padawan311]

Do you know which chassis, blades, sound boards, etc will fit the Graflex 2.0 yet? I want to start buying all the parts I will need. Thanks!

 

[fastostrich]

Hello, just wondering if the graflex 2.0 is still for sale?

Sent from my LGLS991 using Tapatalk

 

[JoMamma_Smurf]

Do you know which chassis, blades, sound boards, etc will fit the Graflex 2.0 yet? I want to start buying all the parts I will need. Thanks!

I'm in the same boat.

 

[Padawan311]

I received this reply from Randy: "It takes a 7/8 inch blade, 7/8 inch heat sink, The top half of the chassis is also 7/8 inch diameter on the inside. The bottom half of the saber / chassis is 1.3 inches diameter on the inside."

I hope this will help. I am still trying to figure out what to buy for the saber myself.

 

[Korbanth]

Yes, those are the dimensions, if anyone wants a graflex 2.0 blueprint, just email me at korbanth47@gmail.com and I'll email it to you. I have just promised the person who created the blueprint, that I wouldn't just post it, but I can give it away privately. I am not the person who designed it, so technical questions I can not answer and I don't have the prototype in hand, but 260 units coming in 3+ weeks and 20 units are still left unsold, so any who are asking if they can still jump into this run, the answer is yes....you can...at least until the last 20 slots are filled... These orders will soon be filling. Anyone who's purchased a slot has been emailed privately on when these will ship, so I know its been quiet on this thread, that's because the machine shop is busy making them....soon, these will be out the door...

 

[Metalman]

Do you have any Graflex 2.0 kits still available. Can send payment right away! If so P.M. me with the details.

 

[jamiemp]

Yes, those are the dimensions, if anyone wants a graflex 2.0 blueprint, just email me at korbanth47@gmail.com and I'll email it to you. I have just promised the person who created the blueprint, that I wouldn't just post it, but I can give it away privately. I am not the person who designed it, so technical questions I can not answer and I don't have the prototype in hand, but 260 units coming in 3+ weeks and 20 units are still left unsold, so any who are asking if they can still jump into this run, the answer is yes....you can...at least until the last 20 slots are filled... These orders will soon be filling. Anyone who's purchased a slot has been emailed privately on when these will ship, so I know its been quiet on this thread, that's because the machine shop is busy making them....soon, these will be out the door...

Sent you a PM to check if it's still available.

 

[3 CELL PO]

These are going to be better looking than a flash handle, and will look perfectly like what people are expecting them to look like...and will please anyone who wants any of the three versions, so you can make your own. I agree that a lower price would be better, as lower prices on anything is always better, but these will be worth the price being charged, and yes, this saber has been done to death, but with this newer style and features, it breathes new life into an old friend, and gives you lots of options. This will not disappoint fans who want a true looking graflex handle...or you can have your money back...

His original source is no longer making the $125-$150 kits, so gone are those...new ones have more options and they cost more at $195.00, but it will be worth it. I have now 70 orders, and half of the orders are paid for, and within a week probably the rest will be too...this one will go, and there will be more for those who want to join in. So anyone considering this new Graflex to make themselves the eP7 version, will want this

Crossguard saber is sitting at 54 interested saber users, and we need to get to 60 before taking pre-payments....and this unit will then be made too. I've done many saber runs in the past 10 years, and these ones kinda excite me the most.

Please add me to the list then pending PM shipping quote.

 

[3 CELL PO]

Payment sent.opcorn

 

[zeroginc]

pm sent

 

[MCM]

Shipping payment sent!

 

[mcsurgeon]

kindly pm me if a slot fir a graflex is still available,and wherebto send payment, thanks!

 

[ladycat1170]

Is there still any of the Graflex 2.0 versions available?

 

[juajn7fernandez]

Any good news??

 

[Sloth]

Shipping payment sent