Egon
Sr Member
For awhile now, I had been wanting to try my hand at sewing my own GB 1 style flight suit.
After having the cotton khaki ripstop for about 2 years, I was finally able to knock it out over this weekend.
Now, I had to eyeball pretty much all the pocket measurements based on the zipper sizes and the prop store pics of the Venkman and Stantz suits, so I am not gonna beat myself up too much on it's inaccuracies.
I did start with a commercial pattern for the main front panels of the suit, sleeves and main front breast pockets, but everything else was done with my designs.
It required adding the action pleat in the rear, drafting new shoulder panels, back channel and straps (with elastic hidden in the channel,
adding a storm flap, lengthening and widening the zipper facing, adjusting the cuff straps, and of course, all the other pockets.
But it was a great starting point.
I did my best to match the direction of the zippers on the CWU 27/p suits and the rough proportions.
The only thing I didn't do was the cone shaped vent on the legs because 1) I was lazy and didn't want to do it and 2) I will most likely always wear the legs tucked into boots or just fully zipped. In addition, I will add the brass eyelets later as I thought I had a setting tool, but seems to have gotten lost.
It took awhile to accumulate all the necessary brass zippers, and I will probably add on patches from the Calgary ghostbusters.
