Farnsworth Discussion

Re: Warehouse 13 Prop Research - The Farnsworth

tonight while gluing one of the jewel "lenses" on my temp faceplate, i stumbled across what may be casuing the weird things we're seeing under it in screencaps and the irregularities among them.

When i sanded the chrome off the back a little and glued it to the styrene with the yellow layer peeled off (exposing a chrome silver layer) the glue and a few cuts i scratched accidently into the chrome layer began to crack and separate, creating the effect we see.

not sure, but could explain it.


Yeah it looks like SUPERGLUE Crazing....
I have glued many a CLEAR hemisphere...as I use they as KEYS for MOLDS.
I have seen that look before. Supergule does it!
 
Re: Warehouse 13 Prop Research - The Farnsworth

......
 
Last edited:
Re: Warehouse 13 Prop Research - The Farnsworth

any tips on what you did and used for your case paintjob? I just painted mine dark brown and regretting it after seeing yours...

DS's color looks great! Looks like a metallic copper/bronze paint color.

I'd be interested to know too.

-DM
 
Re: Warehouse 13 Prop Research - The Farnsworth

Rustoleum has a "Hammered" finish that looks really close to that texture. I have to check and see if they have a brown color. I have some silver that i used on one of my car projects and it looks like the same stuff but a different color. Will report back.....
 
Re: Warehouse 13 Prop Research - The Farnsworth

Darth Saber's paint job is quite neat looking, but it doesn't, at least to my eyes, look like the paint job on the originals. If a Farnsworth is meant to look weathered, I would think the majority of the weathering would be on the outside, and not on the inside of the lid that never gets touched, in a case that's normally closed.

The paint on the cases on the show looks fairly clean and smooth inside and out -- with the exception of that one Wired flash photo. Maybe that was a prototype?

I suspect the prop maker was going for aged, rather than weathered. There's a slight bit of handling wear, and a few chips in the paint along the edge of the lid.
 
Re: Warehouse 13 Prop Research - The Farnsworth

if you check out tbe brightened screenshots that have been posted, you can indeed see the same uneven weathering pattern on the other props that you see in the wired photo, just not as clearly. there is a pattern to the paint.
 
Re: Warehouse 13 Prop Research - The Farnsworth

if you check out tbe brightened screenshots that have been posted, you can indeed see the same uneven weathering pattern on the other props that you see in the wired photo, just not as clearly. there is a pattern to the paint.

In a couple of shots, it looks slightly mottled. It's subtle. In the initial reveal, it's in daylight, and it looks pretty clean.
 
Re: Warehouse 13 Prop Research - The Farnsworth

these shots show to me that the paintjob is a aged, patterned, but smooth paintjob.

http://www.hooverae.com/upload/files/290709/1916106.jpeg

http://www.hooverae.com/upload/files/290709/4199025.jpeg

But I agree, other shots if almost just looks lke a plain flat black with almost no aging.

It reads as dark brown to me. I found that just painting in random layers, mixing flat and gloss browns, gives a very similar effect.
 
Re: Warehouse 13 Prop Research - The Farnsworth

none yet.

any tips on what you did and used for your case paintjob? I just painted mine dark brown and regretting it after seeing yours...

I painted it gloss brown first (The color was actually "espresso").
After dried (Make sure it's completely dry to the touch...No stickiness)I lightly used steel wool to dull it up, and then buffed it to get a semi/gloss look.

THen I used a Reneaissance Brown metallic glaze which I picked up at Michael's arts and crafts ("Elegant Finish - Renaissance Brown DGM01).
Sponged on the glaze, let it dry, then used steel wool to smooth it out, and then buffed it again.
 
Re: Warehouse 13 Prop Research - The Farnsworth

Darth Saber's paint job is quite neat looking, but it doesn't, at least to my eyes, look like the paint job on the originals. If a Farnsworth is meant to look weathered, I would think the majority of the weathering would be on the outside, and not on the inside of the lid that never gets touched, in a case that's normally closed.

The paint on the cases on the show looks fairly clean and smooth inside and out -- with the exception of that one Wired flash photo. Maybe that was a prototype?

I suspect the prop maker was going for aged, rather than weathered. There's a slight bit of handling wear, and a few chips in the paint along the edge of the lid.


It reads as dark brown to me. I found that just painting in random layers, mixing flat and gloss browns, gives a very similar effect.

A few things to take into consideration -

Lighting -

Depending on the amount and type of lighting (natural or artificial), it can change the overall look of the color drastically .

Clairity -
Taking into consideration that many of the reference photos of the original prop are slightly out of focus/blurry, it can significantly disguise the weathering/aging pattern on the prop.


Alternate versions of the prop-
FInally, it's clear to see that there are several versions of the prop. THere are probably a couple of Hero versions (for close-up beauty shots) and a couple of stunt versions (For heavy handeling on the screen)
Stunt props usually have less detail than the hero props, so the stunt props might have less aging/weathering than the hero prop.


Here are some other photos of my paintjob using different variaty of lighting .
As you can see, when the lighting is natural , dimmed or image is slightly blurred, it can can alter the tone, values and uniformity of the colors.

IMG_0302.jpg

IMG_0314b.jpg

IMG_0311.jpg

IMG_0310.jpg


And a comparison to the original prop -

(Note, this shot shows considerable weathering on the inside of the cover, as well as the outside.)
farnsworthface-02660.jpg

1916106.jpeg

(THis shot also shows the weathering on the inside)
4199025.jpeg

2432682.jpeg

2514020.jpeg

Once again, more weathering on the inside -
3333151.jpeg

3420189.jpeg


Keep in mind that these are probably the sharpest shots of the prop...All of the sharp shots show the weahtering pattern on the prop.
Only the out of focus shots make the weathering hard to notice.




DS
 
Last edited:
Re: Warehouse 13 Prop Research - The Farnsworth

DS, I think based on your new pics that you nailed that pretty well.


So I was out at lunch doing a little hunting for parts and stumbled upon what I think is a very good lens for the piece.

I found this clock at my local Target store on the isle with seasonal home interior stuff. It was damaged so they gave it to me for $4.00 (don't ask me how they came up with that from the ridiculous price on the shelf).

Anyway here are some shots of it on the shelf as I found it and then some when I got it home and set it on the 1:1 print outs of the project.



Lonnie
Tk570
 
Re: Warehouse 13 Prop Research - The Farnsworth

The little red tag on it means it's a clearance item, probably on final markdown (75%) if it was really cheap.

D6
 
Re: Warehouse 13 Prop Research - The Farnsworth

oooh, nice, and its glass? what was the original price?
 
Re: Warehouse 13 Prop Research - The Farnsworth

Yes its a glass bubble lens with no lip on the edges (watch your fingers).

The original price was like $24.00 or so and then it had been marked down to $17 and some change. They had four of them on the shelf in various condition and one with no glass on the clock.

It's really a very cheap clock set into a wooden frame. The mechanism itself is made by "Prestige" and says it is made in India.

The fit could not be more perfect though. I think the best approach would be to fit it in through the backside of the brass sheet and then bead some sealer around the edge with something like JB Quick or some tile caulk etc that would hold it in place.

I of course don't have a brass sheet yet... hint hint. :unsure

Lonnie
Tk570
 
Re: Warehouse 13 Prop Research - The Farnsworth

......
 
Last edited:
Re: Warehouse 13 Prop Research - The Farnsworth

Damn, glass certainly makees a difference. Even though I can't tell it's glass by touching it, the quality comes across just from the images.

Great find.

DS
 
Re: Warehouse 13 Prop Research - The Farnsworth

I posted before about watch glass, so I guess I'll post again. This is 80mm watch glass used as a cover:
289087375_8be6102aff.jpg
 
Re: Warehouse 13 Prop Research - The Farnsworth

where can one aquire such glass of a 3 inch diameter?
 
Back
Top