Fabs homemade Indiana Jones Props

Prototypetime for the tracking beacon. The ring is stainless steel, the body is 3D printed and the top a dremeled out akrylic perl (might change it). The light is a ballon light. It can be turned on be rotating the bottom part. The writing on it is still WIP.

-Update-
Version 2

Round lower body and rubber ring


-Update Version 3
Hotrodlamp. I only need to redesign the bottompart and I'm done.

-Update_
Bottompart redesigned and painted. The little thingy is from a clothlabel.
 

Attachments

  • IMG_6262.JPG
    IMG_6262.JPG
    1.4 MB · Views: 97
  • IMG_6257.JPG
    IMG_6257.JPG
    1 MB · Views: 99
  • IMG_6259.JPG
    IMG_6259.JPG
    1.1 MB · Views: 93
  • IMG_6227.jpg
    IMG_6227.jpg
    2.5 MB · Views: 99
  • 524F60D5-6624-43D3-AFE9-C6134C3120FD.JPG
    524F60D5-6624-43D3-AFE9-C6134C3120FD.JPG
    1.2 MB · Views: 112
  • 9D1B69AD-0807-49A2-8F14-E8D1F045630F.JPG
    9D1B69AD-0807-49A2-8F14-E8D1F045630F.JPG
    2 MB · Views: 108
  • IMG_6263.JPG
    IMG_6263.JPG
    2.3 MB · Views: 101
  • IMG_6304.jpg
    IMG_6304.jpg
    760.7 KB · Views: 82
  • 194316934_10159503099586941_2725264585878111202_n.jpg
    194316934_10159503099586941_2725264585878111202_n.jpg
    152.3 KB · Views: 74
  • 4860E19E-2BD6-457E-B0B6-A27109753B7F.JPG
    4860E19E-2BD6-457E-B0B6-A27109753B7F.JPG
    801.6 KB · Views: 84
Last edited:
Sir Richards Shield (picture)

Like the tablet it is made of wood. The writing was trandsfered to the wood with charcoal paper and then dremeled out.

To be able to better hang it on the wall I thought I made a flat version to mount it like a picture. The ratio of the engraving is therefore a bit smaller than on the tablet and the movies as it is smaller without the curve.
The separation(cross) or how you call it is made of steel and then painted.

The panting is done with sparypaint and acrylic colors. No weathering done yet.
 

Attachments

  • IMG_5307.JPG
    IMG_5307.JPG
    1.7 MB · Views: 110
  • 39DB3FD7-52D7-4B1A-BADF-0908100D4B08.JPG
    39DB3FD7-52D7-4B1A-BADF-0908100D4B08.JPG
    974.5 KB · Views: 112
  • IMG_5088.JPG
    IMG_5088.JPG
    2 MB · Views: 113
  • 3F56F1EC-2965-459C-8682-42EEDFA2C9E0.JPG
    3F56F1EC-2965-459C-8682-42EEDFA2C9E0.JPG
    986.4 KB · Views: 117
  • B59CDCFC-2426-4326-8213-976FB282F9C6.JPG
    B59CDCFC-2426-4326-8213-976FB282F9C6.JPG
    809.9 KB · Views: 110
  • IMG_5357.JPG
    IMG_5357.JPG
    891.8 KB · Views: 118
I would love to see the entire collection on display if you're finished
I'm not finished but I've done quite a lot so far. I still have a lot to upload :cry: and a lot of projects in the works and in my mind. And if Disney continues who knows what's going to happen :rolleyes::lol: But I think another month or so and I could show a current intermediate. I'm not only making stuff. I also get the props I can't make. At least for now.... Thank you for the interest:cry::cry:
 
I'm not finished but I've done quite a lot so far. I still have a lot to upload :cry: and a lot of projects in the works and in my mind. And if Disney continues who knows what's going to happen :rolleyes::lol: But I think another month or so and I could show a current intermediate. I'm not only making stuff. I also get the props I can't make. At least for now.... Thank you for the interest:cry::cry:
* when you are finished.

I saw an idol in the back, so I guessed you had more stuff for your display.
 
* when you are finished.

I saw an idol in the back, so I guessed you had more stuff for your display.
Yes it's the Toynk. A projekt for the summer is to cast one in brass. But we will see how that goes. :rolleyes: Or how long it'll take me to get it done. o_O But I will post a picture of my whole collection so far soon I promise.

Here is an old state

But it moved, grew and changed since than
 
Last edited:
Can‘t find the damn Short Round cap. So I tried to make one from a New Era mets cap.
I restiched the logo, shortened the brim and weathered it.
 

Attachments

  • IMG_6266.JPG
    IMG_6266.JPG
    2 MB · Views: 78
  • IMG_5493.jpg
    IMG_5493.jpg
    3.2 MB · Views: 87
  • IMG_5491.jpg
    IMG_5491.jpg
    2.9 MB · Views: 91
  • IMG_5451.JPG
    IMG_5451.JPG
    2.1 MB · Views: 91
  • IMG_5387.JPG
    IMG_5387.JPG
    2.2 MB · Views: 85
  • IMG_5386.JPG
    IMG_5386.JPG
    2.1 MB · Views: 87
Nur Ab Sal Medallion

Sawn out of an old computer case (aluminum) and filed and dremeled into shape. Golden painted and weathered with acrylic colors. Need to change the chain though. The spiral I dremeled in. Didn't like the glued on top version
 

Attachments

  • IMG_5522.jpg
    IMG_5522.jpg
    2.5 MB · Views: 101
Last edited:
Atlantis wallart made of wood and mostly done with dremel and sanding paper. Colored with acrylic colors.
 

Attachments

  • F343F38D-A7C3-4181-BA46-3D7E1BF4373E.jpeg
    F343F38D-A7C3-4181-BA46-3D7E1BF4373E.jpeg
    254.2 KB · Views: 106
Last edited:
Ravenwood Diary

As my handwriting is terrible at least to me I converted the text into a handwritten font and printed the thing. The downside is I don't have the lines on the pages but with the rest I'm very happy. Not all pages shown.
 

Attachments

  • IMG_6219.JPG
    IMG_6219.JPG
    2.6 MB · Views: 118
  • IMG_5825.JPG
    IMG_5825.JPG
    2.8 MB · Views: 119
  • IMG_5739.JPG
    IMG_5739.JPG
    2.9 MB · Views: 122
  • 00D969C9-30A0-436A-9E48-F6D353392578.JPG
    00D969C9-30A0-436A-9E48-F6D353392578.JPG
    838.2 KB · Views: 135
  • IMG_5738.JPG
    IMG_5738.JPG
    2 MB · Views: 127
Grail Diary

My Grail Diary I did a while back and came back to like a thousend times.
1f605.png
 

Attachments

  • IMG_6326.JPG
    IMG_6326.JPG
    1.7 MB · Views: 139
  • IMG_3074.JPG
    IMG_3074.JPG
    3 MB · Views: 146
  • IMG_3075.JPG
    IMG_3075.JPG
    1.7 MB · Views: 122
  • IMG_3076.JPG
    IMG_3076.JPG
    3.4 MB · Views: 118
  • E94094E3-2347-4BA6-B63B-6D98FDF21185.JPG
    E94094E3-2347-4BA6-B63B-6D98FDF21185.JPG
    1.5 MB · Views: 127
  • IMG_3308.JPG
    IMG_3308.JPG
    1.2 MB · Views: 117
  • IMG_3311.JPG
    IMG_3311.JPG
    1.6 MB · Views: 125
  • IMG_3312.JPG
    IMG_3312.JPG
    1.6 MB · Views: 113
  • IMG_3313.JPG
    IMG_3313.JPG
    1.5 MB · Views: 116
  • IMG_3316.JPG
    IMG_3316.JPG
    1.6 MB · Views: 134
Last edited:
Chilled Monkeybrains

Cup:
The leg is 3D designed and printed. Afterwards molded and casted in pewter. The connector is a stainless steel pipe and the eyepiece of vintage binoculars. The bowl ist stainless steel and spray painted. The golden ring is 3D printed and painted.

Monkeyhead:
3D printed and painted. The hair is from a wig

No brain yet

-Update-
Epoxy to give the eyes a more realistic touch.

-Update-
Brain
3D printed, painted and covered with epoxy
 

Attachments

  • IMG_6902.jpg
    IMG_6902.jpg
    1.9 MB · Views: 105
  • IMG_6903.jpg
    IMG_6903.jpg
    2.1 MB · Views: 109
  • 0C27042A-CA5F-400B-9AA3-DCE87337A5D1.JPG
    0C27042A-CA5F-400B-9AA3-DCE87337A5D1.JPG
    1.3 MB · Views: 113
  • D24C469C-181A-46D3-8D03-322479D187E6.JPG
    D24C469C-181A-46D3-8D03-322479D187E6.JPG
    795.5 KB · Views: 93
  • EBE4F106-B23B-4C30-AD0C-134B87488E5D.JPG
    EBE4F106-B23B-4C30-AD0C-134B87488E5D.JPG
    817.5 KB · Views: 90
  • IMG_6381.JPG
    IMG_6381.JPG
    617.4 KB · Views: 84
  • IMG_6541.JPG
    IMG_6541.JPG
    1.5 MB · Views: 81
  • 3B5A1AB5-899D-459E-8ED5-9F510F896670.JPG
    3B5A1AB5-899D-459E-8ED5-9F510F896670.JPG
    1 MB · Views: 94
  • ACDFC1B1-8D6D-4544-94D2-FEE58290BA7A.JPG
    ACDFC1B1-8D6D-4544-94D2-FEE58290BA7A.JPG
    1.2 MB · Views: 90
  • 9B33EDD8-1C14-411E-A44E-2F9D51801A9D.jpeg
    9B33EDD8-1C14-411E-A44E-2F9D51801A9D.jpeg
    395.6 KB · Views: 83
  • IMG_6975.jpg
    IMG_6975.jpg
    1.6 MB · Views: 92
  • IMG_6979.jpg
    IMG_6979.jpg
    1.6 MB · Views: 91
Last edited:

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top