Limited Run Dune (2021) Stillsuit kits

XavNZ92

Active Member
**Update**

**Covid disruptions due to omicron in New Zealand mean I currently can't take on new orders for RUBBER kits , Foam kits are still a go **

After months of R&D and work and a few one off sales I am proud to announce my first (of a few) limited runs for my Dune Fremen stillsuit kits.

Each kit includes the following :

-Chest piece (front and back)
-Belt pieces (excluding webbing)
-Crotch and stomach plate.
-3D printed breathing tube attachment.
-Professional grade instruction booklet.

*Does NOT include the undersuits.
**These are DIY kits that require assembly.

I currently plan on making a run of 10 kits so very limited slots.

There are two tiers for the kits.

-Standard tier : HD foam light and less warm (8 slots) available in sizes S-XXL 350-450 USD + shipping.

-Premium tier : Screen accurate rubber heavy more expensive and complex to assemble and very warm (2 slots) available in size S-M only (850-900 USD)

See pictures for sizing and feel free to ask questions , these are proudly made in New Zealand.
 

Attachments

  • CYMERA_20220113_191506.jpg
    CYMERA_20220113_191506.jpg
    2 MB · Views: 672
  • CYMERA_20220107_224917.jpg
    CYMERA_20220107_224917.jpg
    439.8 KB · Views: 603
  • CYMERA_20220107_224944.jpg
    CYMERA_20220107_224944.jpg
    1 MB · Views: 493
  • IMG_20211229_102727.jpg
    IMG_20211229_102727.jpg
    1.5 MB · Views: 463
  • IMG_20211126_203532.jpg
    IMG_20211126_203532.jpg
    1.5 MB · Views: 432
  • IMG_20220106_130240.jpg
    IMG_20220106_130240.jpg
    3.5 MB · Views: 395
  • IMG_20220106_130324.jpg
    IMG_20220106_130324.jpg
    8.6 MB · Views: 340
  • IMG_20220106_130421.jpg
    IMG_20220106_130421.jpg
    9.4 MB · Views: 315
  • IMG_20220106_130512.jpg
    IMG_20220106_130512.jpg
    2.5 MB · Views: 281
  • IMG_20220106_130535.jpg
    IMG_20220106_130535.jpg
    4.6 MB · Views: 245
  • IMG_20220106_130607.jpg
    IMG_20220106_130607.jpg
    4.2 MB · Views: 248
  • IMG_20220106_130657.jpg
    IMG_20220106_130657.jpg
    3.6 MB · Views: 240
  • IMG_20220106_130732.jpg
    IMG_20220106_130732.jpg
    3 MB · Views: 230
  • IMG_20220106_130753.jpg
    IMG_20220106_130753.jpg
    7.8 MB · Views: 225
  • IMG_20220106_130827.jpg
    IMG_20220106_130827.jpg
    9.6 MB · Views: 221
  • IMG_20220106_131004.jpg
    IMG_20220106_131004.jpg
    7.5 MB · Views: 257
  • Screenshot_20211229-080851.png
    Screenshot_20211229-080851.png
    133.4 KB · Views: 495
Last edited:
Good stuff here. For those on the fence, I've been going back and forth with XavNZ92 for a couple weeks now on getting one of his premium kits, he's detailed, professional and communicative, for him this is a passion project, IMHO you're in good hands.

 
This work is absolutely gorgeous, but I hesitate about my lady-presenting body, which might still swim a bit in the S measurements.
 
This work is absolutely gorgeous, but I hesitate about my lady-presenting body, which might still swim a bit in the S measurements.
Hey I am as skinny as Timothée Chalamet I'm 5'8 and 128 pounds the S is based of my measurements and fits great.
 
Hey I am as skinny as Timothée Chalamet I'm 5'8 and 128 pounds the S is based of my measurements and fits great.
Helpful to know! I think that cements that it won't work, though. I am 5'5" and the S measurements are all 3-8 inches off from mine in each place. The jumpsuit underneath would add some size, but I don't think it would be quite so much as needed, then.
 
I'm 6'1" and very lean, will the foam kit fit me? if so very interested!
Check out my etsy page there are full and updated sizing details there if you need a custom size or have an atypical morphology buy a set of patterns (is available in all sizes from S-XXL in one package) and then experiment and scale. Alternatively I could try to scale to your exact measurements.
 
I’ve been wanting to make a go at a stillsuit of my own for a while. Any chance you would share/sell the patterns once your run is done?
Patterns are available for purchase on my etsy store along with 3d print files for the maula Pistol.

Etsy shop name is Sietch Armoury you can also search for stillsuit there !
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top