Done / Completed Doctor Who Machined Classic Sonic Kits/Completed Units

[Bluebox303]

Ok, so all of the sonic kits have shipped out now. I was unable to ship the kits out over the weekend because Memorial Day had closed the Post Office. The instructions are also almost complete, but I'm still in the process of adding pictures to it to make it easier to understand. I'm still working on the completed sonics, and I ask that everybody please try to be as patient as possible, as I am trying to get the custom requests completed properly. As for the tracking numbers, some people did not leave their board names with the Paypal payment, so i was unable to send you a shipping address.

Edit: There was one person whose Baker kit I forgot to send out. :facepalm Sorry about that. I'll be shipping it out with the third batch of sonics which will probably this weekend.

 

[Skippy2k]

As excited and looking forward to seeing these as I am I'm fine with waiting as I know you have a few to do and I was pretty specific myself with customization. Rather it take longer and be right than rushed but looking forward to getting them! Didn't know if you got my reply to your pm or if I conveyed it clearly? Hope so!

 

[Bluebox303]

As excited and looking forward to seeing these as I am I'm fine with waiting as I know you have a few to do and I was pretty specific myself with customization. Rather it take longer and be right than rushed but looking forward to getting them! Didn't know if you got my reply to your pm or if I conveyed it clearly? Hope so!

Thanks for the reminder! I remember seeing it but I forgot to respond to it. I'll shoot you a response ASAP.

 

[Usagi Pilgrim]

Hey Blue box. Just got most of my sonic in the mail today, & it looks fantastic. Thanks so much for the run.

I did say 'most' of my sonic as I seem to be missing a few parts. Looks like it's just the bullet & halo parts as I have the magnet. I was going to post a photo of what I have, but Photobucket isn't working for me for some reason.

Here's a list of what I have-

Base with slanted end attached
Grip piece
Internal rod
Bullet
Thin rod between bullet & halo
Spring
Two different spacer/washers
Magnet
Strip of chrome tape

I've went through the packaging very thoroughly, but that's all I have.

Just to clarify, I have the ridged bullet that comes out of the sonic. I'm missing the one that's in the halo with the magnet.

 

[Bluebox303]

Hey Blue box. Just got most of my sonic in the mail today, & it looks fantastic. Thanks so much for the run.

I did say 'most' of my sonic as I seem to be missing a few parts. Looks like it's just the bullet & halo parts as I have the magnet. I was going to post a photo of what I have, but Photobucket isn't working for me for some reason.

Here's a list of what I have-

Base with slanted end attached
Grip piece
Internal rod
Bullet
Thin rod between bullet & halo
Spring
Two different spacer/washers
Magnet
Strip of chrome tape

I've went through the packaging very thoroughly, but that's all I have.

Just to clarify, I have the ridged bullet that comes out of the sonic. I'm missing the one that's in the halo with the magnet.

I'm still slightly confused. Are you just missing the Cone-shaped Halo Bullet, or are you missing the whole Halo Assembly?

If that is the case, I'll try and see if I can scrounge one together, but in case you decide to look for the parts again, I remember packaging them in a cellophane wrap, or a blue painter's tape bundle.

If you can't find the pieces, just PM me and I'll see what I can arrange.

 

[Usagi Pilgrim]

I'm still slightly confused. Are you just missing the Cone-shaped Halo Bullet, or are you missing the whole Halo Assembly?

If that is the case, I'll try and see if I can scrounge one together, but in case you decide to look for the parts again, I remember packaging them in a cellophane wrap, or a blue painter's tape bundle.

If you can't find the pieces, just PM me and I'll see what I can arrange.

PM incoming. Thanks.

 

[E Williams]

Got my two kits - looking good and I think everything is accounted for. A few minute tool marks on them but they should polish out just fine (picked up some Cape Cod cloths). Thanks!

 

[Doctor Whom]

So, have all of the completed sonics been shipped out last weekend? Or are they being shipped out in waves?

 

[Kylash]

I dont think any finished ones have shipped, I know I havent gotten a pm of any kind. But without a visible list, its hard to tell.

 

[geordieman]

Don't think so...not got a PM on my kit yet from last week??

Make that over two weeks now, and no answer to PM.

Please get in touch
Thanks.

 

[Kylash]

Anyone got pics of their kits? Just desperate to see anything new while waiting for my finished sonic.

 

[Martin-El]

Seconded!

 

[Usagi Pilgrim]

I can say that I have my kit, but I'm still waiting on my missing halo parts. What I have is very clean work, & looks & feels great in the hand.

I was told the parts would ship last weekend with the third batch. I sent a picture of what I received, but haven't gotten a response to my last PM, but I do have 90% of a sonic, so I'm not worried about flaking.

 

[Metaluna mutant]

Anyone got pics of their kits? Just desperate to see anything new while waiting for my finished sonic.

I've started priming some parts, but holding off on painting as yet -- especially the multicolored pertwee one. I'm still debating how to proceed for that one. I'm using the toy as a painting guide and spiral stripe over yellow is going to be a bear, I'll probably have to use an auto detailing pinstripe sticker.

 

[Usagi Pilgrim]

Bringing this to the top for any updates?

 

[geordieman]

I've started priming some parts, but holding off on painting as yet -- especially the multicolored pertwee one. I'm still debating how to proceed for that one. I'm using the toy as a painting guide and spiral stripe over yellow is going to be a bear, I'll probably have to use an auto detailing pinstripe sticker.

Hi,
seen a video a while back were the guy pints the black on first, let that dry then wrap some string in a spiral as a mask, then spray yellow. Looked good on the video . They did say to use a fine nylon string so you have minimum fluff on the edged.
Hope this helps.

Phil.

 

[Bluebox303]

Davison and Baker completed sonics are completed, but the Pertwee ones are taking a bit longer to finish due to the extensive and delicate detailing that needs to be applied. I do have the instruction manual complete with images of the build process. I'm just proofreading it now, and I will post it in a PDF format so those with kits can view it. Those who ordered just Baker or Davison completed sonics will have their orders shipped out in the next 2-3 days. Those with Pertwee completed sonics will ship out the end of next week.

Sorry about the delay

 

[Kylash]

Thanks for the update. Lmk if you got my shipping address PM, I don't think I had mine in my payment.

 

[Bluebox303]

Alright, here's the instruction manual.

View attachment InstructionManual.pdf

More to come!

- - - Updated - - -

Thanks for the update. Lmk if you got my shipping address PM, I don't think I had mine in my payment.

I got your shipping address. All clear!

 

[Usagi Pilgrim]

Any update on my halo parts?