Doc's foam/fiberglass work + Mark 42 painted pieces

[Willswoosh]

Re: Doc's Foam Ironman + finally the Mark 8 boots,Vid of arc reactor and now Warmachi

So, you just use the soldering iron end and burn in lines? Sorry, loving the idea. Wanting to make sure I would be doing it right. Thanks

Lol thanks Darkside and yea getting a little burned out

.............

Thanks dude


I scale it at whatever the size of customer so maybe tell me your height and I can give ya an idea



I think I have it down prettygood but thanks



Lol thanks man



:lol thanks peejfro



good one


Thanks man



Yea I do solder lines. I find it gives more detail and Im pretty good at engraving and reminds me of that.




Thanks dude and I get it at Hobbylobby

 

[docholiday78]

Re: Doc's Foam Ironman + finally the Mark 8 boots,Vid of arc reactor and now Warmachi

So, you just use the soldering iron end and burn in lines? Sorry, loving the idea. Wanting to make sure I would be doing it right. Thanks

Theres different tips to do different lines like real thin to real thick. Its not just random lines I look at lots and lots of reference photos, draw in lines then solder.

 

[docholiday78]

Re: Doc's foam Ironman and now Warmachine completed video!

What do you mean when you heat seal with heat gun? I'm doing warmachine foam and was curious.

Looking good, by the by.

oh and by heat gun I just run it all over piece. It just helps the sealing process

 

[Peejfro]

Re: Doc's foam Ironman and now Warmachine completed video!

The boots to warmachine done its now fully completed. 1 down lots to go

woa doc stop right there sonny jim! u are in severe danger of an overdose of TOTALLY AWESOMENESS!!!!!! hahahahaha very impressive brother :thumbsup

 

[Ciano930]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

Nice work man just wondering where did you get the foam?

 

[docholiday78]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

woa doc stop right there sonny jim! u are in severe danger of an overdose of TOTALLY AWESOMENESS!!!!!! hahahahaha very impressive brother :thumbsup

Thanks man:lol let me know if ya need some help on the scaling of the your ironman legs

Nice work man just wondering where did you get the foam?

Thanks and I get it at HobbyLobby its a local art n craft store in my area. Or can order online at Hobby Lobby

 

[Ciano930]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

you beaut! thanks! i had to use super dense 1/2 inch foam from early learning center for my last suit =/

 

[darkside501st]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

Nice work man just wondering where did you get the foam?

That is like the third or forth time he has answered this question on the last few pages alone.

I can understand how tiresome it gets answering the same questions over and over. Please read the thread or at least search for the answer to your questions before you ask. Chances are, by now, you are not the first person that has asked whatever question you are thinking about.

The sad thing is that this post probably wont help because the offenders won't read it.

 

[smoothrat]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

That is like the third or forth time he has answered this question on the last few pages alone.

The sad thing is that this post probably wont help because the offenders won't read it.

doc, with all the great information you're sharing, you could save time by updating your signature as below. And somebody will still ask.

_____

The foam is from HobbyLobby: 2, 3, and 5mm.

Paint is Duplicolor.

Here are the steps:

1. heatseal with heatgun
2. 1 coat watered down elmers
3. 2 light coat modpodge
4. 1 coat bulldog adhesion promoter
5. primer
6. paint
7. clearcoat and put bulldog adhesion promoter after to give it more flex

 

[docholiday78]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

That is like the third or forth time he has answered this question on the last few pages alone.

I can understand how tiresome it gets answering the same questions over and over. Please read the thread or at least search for the answer to your questions before you ask. Chances are, by now, you are not the first person that has asked whatever question you are thinking about.

The sad thing is that this post probably wont help because the offenders won't read it.

:lol awesome post thumbsup and thanks for posting that, yea it does get old fast. I could only imagine how you feel bud with your Mark 7 thread with almost 500,000 views:lol

doc, with all the great information you're sharing, you could save time by updating your signature as below. And somebody will still ask.

_____

The foam is from HobbyLobby: 2, 3, and 5mm.

Paint is Duplicolor.

Here are the steps:

1. heatseal with heatgun
2. 1 coat watered down elmers
3. 2 light coat modpodge
4. 1 coat bulldog adhesion promoter
5. primer
6. paint
7. clearcoat and put bulldog adhesion promoter after to give it more flex

:lol yea I'm 100% sure someone would still ask

 

[Iron Spidey88]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

AWeSOME WORK DOC LOOKING FORWARD TO DOING BUSINESS WITH YA lol​

 

[docholiday78]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

AWeSOME WORK DOC LOOKING FORWARD TO DOING BUSINESS WITH YA lol​

:lol I'm also looking forward to doing business with ya:thumbsup

 

[Effect87]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

Wats up Doc. Builds lookin amazing as always. I just wanna say thanks for all ur help. and im also gonna be startin my own thread soon.... as soon as i make 20 posts. lmao. When i do ill let u know so u can see wat ive got so far with the help from u building titans

 

[docholiday78]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

Wats up Doc. Builds lookin amazing as always. I just wanna say thanks for all ur help. and im also gonna be startin my own thread soon.... as soon as i make 20 posts. lmao. When i do ill let u know so u can see wat ive got so far with the help from u building titans

Your welcome dude glad to help out. Yea let me know when ya start a thread so I can check it out

 

[docholiday78]

Re: Doc's foam Ironman + now Warmachine completed video and boots!

A mark 6 I'm quickly trying to finish, one leg down almost done with the otherlol gonna paint tommorow, its gnna look crazy when finished

 

[streetsoul]

Re: Doc's foam Ironman, warmachine and other cool info + Mark 6 legs and boots

you sir are a foam genious

 

[jackieisrockin]

Re: Doc's foam Ironman, warmachine and other cool info + Mark 6 legs and boots

As always, it looks amazing! Keep up the great work

 

[Rysjin7717]

Re: Doc's foam Ironman, warmachine and other cool info + Mark 6 legs and boots

Hey Doc, wow!!! This is some thread ya got here brah nice an clean lines an th' detail work is superb /w/ a great paint finish lovin' th' battle damage your doin on your suit. Sharin' your methods /w/ others is priceless can't wait ta see your final product. opcorncool

 

[docholiday78]

Re: Doc's foam Ironman, warmachine and other cool info + Mark 6 legs and boots

you sir are a foam genious

lol thanks streetsoul

As always, it looks amazing! Keep up the great work

Thanks jackie

Hey Doc, wow!!! This is some thread ya got here brah nice an clean lines an th' detail work is superb /w/ a great paint finish lovin' th' battle damage your doin on your suit. Sharin' your methods /w/ others is priceless can't wait ta see your final product. opcorncool

Thanks Rysjin

 

[docholiday78]

Re: Doc's foam Ironman, warmachine and other cool info + Mark 6 legs and boots

Got a suprise visit from my bro today and my little nephew loved the Ironman props I made and making and wanted an Ironpatriot. Never made one but jackies files rock and made him one. Did it kinda fast but if I make another one its gonna be awesome now since I got a feel for it. Hope ya'll like it and thanks jackie for your awesome files