Darkside501st's Iron Man Mk VII pepakura files - Password in First Post
- Thread starter darkside501st
- Start date
FerrousBueller
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Is there any chance of getting the V2 Helmet done in the 1.01 - 1.04 scales? I pepped the 1.0 tester and it fits, but I think too snugly. I kind of have a big head.
When I looked at the overall width of the 1.05 scale, it said it was 198mm wide. I can't do a point-to-point measurement in the viewer, so I can't tell for sure, but I think it might be too big. I'll try to pep out the 1.02 or 1.03 to split the difference, but if you can post the PDOs before I do all the printing and pepping, that would kick mucho ass.
Is there any chance of getting the V2 Helmet done in the 1.01 - 1.04 scales? I pepped the 1.0 tester and it fits, but I think too snugly. I kind of have a big head.
When I looked at the overall width of the 1.05 scale, it said it was 198mm wide. I can't do a point-to-point measurement in the viewer, so I can't tell for sure, but I think it might be too big. I'll try to pep out the 1.02 or 1.03 to split the difference, but if you can post the PDOs before I do all the printing and pepping, that would kick mucho ass.
FerrousBueller
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Awesome! I know it's a huge motivator to have wearable pieces!
For the first time, I can wear it with all the pieces attached
View attachment 223329
But there is still a lot of work to do!!!
Awesome! I know it's a huge motivator to have wearable pieces!
ballanux
Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
it certainly is!
My helmet is 1.05 and by the photo, you can tell that is way too big :lolIs there any chance of getting the V2 Helmet done in the 1.01 - 1.04 scales? I pepped the 1.0 tester and it fits, but I think too snugly. I kind of have a big head.
it certainly is!
sylvester86
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
you need to remember too ask for the paper type as well (A4, letter and so on) also, if it's for a cardstok build or foam templates
Is there any chance of getting the V2 Helmet done in the 1.01 - 1.04 scales? I pepped the 1.0 tester and it fits, but I think too snugly. I kind of have a big head.
you need to remember too ask for the paper type as well (A4, letter and so on) also, if it's for a cardstok build or foam templates
FerrousBueller
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Thanks! It would be for letter sized paper, for a card stock pep build.
Thanks! It would be for letter sized paper, for a card stock pep build.
sylvester86
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
don't tell me, tell darkside :lol lol
can't wait to see how it turns out... happy peping :lol
don't tell me, tell darkside :lol lol
can't wait to see how it turns out... happy peping :lol
FerrousBueller
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Gotcha, thanks. Wasn't sure if posting in the thread was enough or if I needed to PM.
Gotcha, thanks. Wasn't sure if posting in the thread was enough or if I needed to PM.
FerrousBueller
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Newb question time - I see lots of posts referring to pep scales in the 22-25 range. All I know how to scale is by using a scale factor based on 1.00 (as in 1.0 = 100%, so .95 = 95%).
Where are the scales of "23.5" (for example) coming from? Is it an older version of pepakura designer or something? I've looked through the forums so please go easy on me
Second newb question - if the V2 files are only going to be released in Pepakura Viewer, how can I do point-to-point measurements to ensure the scale of that piece will work for me? Not being able to do that could result in a ton of printing, cutting, then oops...need 1% bigger/smaller.... reprint, recut, etc.
Thanks!
Newb question time - I see lots of posts referring to pep scales in the 22-25 range. All I know how to scale is by using a scale factor based on 1.00 (as in 1.0 = 100%, so .95 = 95%).
Where are the scales of "23.5" (for example) coming from? Is it an older version of pepakura designer or something? I've looked through the forums so please go easy on me
Second newb question - if the V2 files are only going to be released in Pepakura Viewer, how can I do point-to-point measurements to ensure the scale of that piece will work for me? Not being able to do that could result in a ton of printing, cutting, then oops...need 1% bigger/smaller.... reprint, recut, etc.
Thanks!
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
About the handplate. Would you rather keep it in one piece or articulate it with a hinge?
About the handplate. Would you rather keep it in one piece or articulate it with a hinge?
jimcrack
New Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Hello to everyone,
Has been a long time since my last post. Here are some updates of my progress.
Up to date I have:
1) helmet (candidate)
2) Chest piece
3) Back Piece (without flaps)
4) Both Biceps
5) Both Shoulder bells sets
6) Neck piece
7) Both Elbows
I have the project album public on facebook: Facebook Album
Thanks to all the comunity for providing such a big help
Hello to everyone,
Has been a long time since my last post. Here are some updates of my progress.
Up to date I have:
1) helmet (candidate)
2) Chest piece
3) Back Piece (without flaps)
4) Both Biceps
5) Both Shoulder bells sets
6) Neck piece
7) Both Elbows
I have the project album public on facebook: Facebook Album
Thanks to all the comunity for providing such a big help
Last edited:
bak9799
Well-Known Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
This is coming along nicely! Which neck file are you using?
This is coming along nicely! Which neck file are you using?
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
hey i am new to all this stuff and i just want to make the iron man mark vii helmet but whenever i print it it has all these fold lines where im ment to fold it but i just want to trace it on to foam and cut it out so can anyone tell me how to get rid of the fold lines (i also have the free version of pepuruka will that affect it)
hey i am new to all this stuff and i just want to make the iron man mark vii helmet but whenever i print it it has all these fold lines where im ment to fold it but i just want to trace it on to foam and cut it out so can anyone tell me how to get rid of the fold lines (i also have the free version of pepuruka will that affect it)
jimcrack
New Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Hello, I'm using this one: http://www.therpf.com/f24/cleaner-greener-ironman-files-foam-160488/
I think is some variation of robo3687's neck
To get the scale I had to take my measures and modify the neck scale until its measures matched with mines.
Hello, I'm using this one: http://www.therpf.com/f24/cleaner-greener-ironman-files-foam-160488/
I think is some variation of robo3687's neck
To get the scale I had to take my measures and modify the neck scale until its measures matched with mines.
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Ok put up a 1.03 scale for you.
I also want to thank FerrousBueller for being a big supporter of my work and for your contributions to this project. Your name has been added to the VIP list and you will get the 2 months early access to the V2 files when they are done.
Is there any chance of getting the V2 Helmet done in the 1.01 - 1.04 scales? I pepped the 1.0 tester and it fits, but I think too snugly. I kind of have a big head.
Ok put up a 1.03 scale for you.
I also want to thank FerrousBueller for being a big supporter of my work and for your contributions to this project. Your name has been added to the VIP list and you will get the 2 months early access to the V2 files when they are done.
bak9799
Well-Known Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Thank you!
Thank you!
sylvester86
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
hey man, sorry for the mix up... you don't have to PM darkside if you need a different scale than what's uploaded you can ask him in the thread as well as in a PM if you so choose
to answer your first newb question as best I can... the scale factor 1.0 is for things like the helmet and (hand's I think) and the scale factor in the 22-25 range is for the (bigger) pieces, chest, arms,back,legs etc.
second newb question... the V2 files will be released in pep Viewer but as I recall, darkside said a little while back that he will make test fit pieces of all the armor parts for pep Designer just like the test fit helmet
hope that helps.
hey man, sorry for the mix up... you don't have to PM darkside if you need a different scale than what's uploaded you can ask him in the thread as well as in a PM if you so choose
Newb question time - I see lots of posts referring to pep scales in the 22-25 range. All I know how to scale is by using a scale factor based on 1.00 (as in 1.0 = 100%, so .95 = 95%).
Where are the scales of "23.5" (for example) coming from? Is it an older version of pepakura designer or something? I've looked through the forums so please go easy on me
Second newb question - if the V2 files are only going to be released in Pepakura Viewer, how can I do point-to-point measurements to ensure the scale of that piece will work for me? Not being able to do that could result in a ton of printing, cutting, then oops...need 1% bigger/smaller.... reprint, recut, etc.
Thanks!
to answer your first newb question as best I can... the scale factor 1.0 is for things like the helmet and (hand's I think) and the scale factor in the 22-25 range is for the (bigger) pieces, chest, arms,back,legs etc.
second newb question... the V2 files will be released in pep Viewer but as I recall, darkside said a little while back that he will make test fit pieces of all the armor parts for pep Designer just like the test fit helmet
hope that helps.
FerrousBueller
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Thanks Darkside501st!
- - - Updated - - -
Thanks for the help! Test fit pieces would be a big help, especially for the larger pieces.
Thanks Darkside501st!
- - - Updated - - -
Thanks for the help! Test fit pieces would be a big help, especially for the larger pieces.
Re: Darkside501st's Iron Man Mk VII pepakura files - V2 Biceps Done pg 130!
Ey folks, finally got around painting my foam build. Used 5 coats of pva/water for sealing + grey primer + metallic blue base coat + metallic candy red. Overall im pretty happy with the red, i got that marroonish color that i was hoping for. I plan on changing the gold, coz its a little too yellow for my taste.
*question to the folks in the philippines, any idea what i can use to replace plastidip? I havent seen them available in any hardware i go to, also what kind of gold would you recommend thats locally available?
TIA
Ey folks, finally got around painting my foam build. Used 5 coats of pva/water for sealing + grey primer + metallic blue base coat + metallic candy red. Overall im pretty happy with the red, i got that marroonish color that i was hoping for. I plan on changing the gold, coz its a little too yellow for my taste.
*question to the folks in the philippines, any idea what i can use to replace plastidip? I havent seen them available in any hardware i go to, also what kind of gold would you recommend thats locally available?
TIA
Attachments
Last edited:
Similar threads
