Ironpredator
Active Member
Re: DancinFools Iron Man Mark III Pep File Development
late comer, but thanks a million for these files
late comer, but thanks a million for these files
DancinFools Iron Man Mark III Pep Files - New Chest Started
- Thread starter Dancin_Fool
- Start date
CyberPaddy66
Well-Known Member
Re: DancinFools Iron Man Mark III Pep File Development
Sorry guys I got distracted by real life and forgot about the files...
Iron Man Mark III Leg Thigh 409mm LEFT by Dancing Fool CP66 unfold.pdo - 4shared.com - online file sharing and storage - download
Iron Man Mark III Leg Thigh 409mm RIGHT by Dancing Fool CP66 unfold.pdo - 4shared.com - online file sharing and storage - download
It's scaled properly to 1.525 and I finished building them last week and they look great Pics to follow later this week on my thread!
Sorry guys I got distracted by real life and forgot about the files...
Iron Man Mark III Leg Thigh 409mm LEFT by Dancing Fool CP66 unfold.pdo - 4shared.com - online file sharing and storage - download
Iron Man Mark III Leg Thigh 409mm RIGHT by Dancing Fool CP66 unfold.pdo - 4shared.com - online file sharing and storage - download
It's scaled properly to 1.525 and I finished building them last week and they look great
Pics to follow later this week on my thread!
keijsertje
New Member
Re: DancinFools Iron Man Mark III Pep File Development
hi yah guys
heads of to DF this is tight
but is there a zip with al the files ??
because english isent my mother lanuage zo iam having troble finding al the parts that are unfolded ect
kind reagards
from holland
hi yah guys
heads of to DF this is tight
but is there a zip with al the files ??
because english isent my mother lanuage zo iam having troble finding al the parts that are unfolded ect
kind reagards
from holland
CyberPaddy66
Well-Known Member
Re: DancinFools Iron Man Mark III Pep File Development
Look at Zababa's build page as DF hasn't done the boots yet.
Look at Zababa's build page as DF hasn't done the boots yet.
crabbyjay
New Member
Re: DancinFools Iron Man Mark III Pep File Development
Hello everyone, I have been pepping this armor and I am getting somewhat close to completion and I was wondering if someone could post pics of all the attachment points for this armor and also what you use to attach the pieces, I.E. buckles, rivets, velcro or whatever. Any help would be greatly appreciated!! Thanks for all amazing advice and help everyone has posted!!
Hello everyone, I have been pepping this armor and I am getting somewhat close to completion and I was wondering if someone could post pics of all the attachment points for this armor and also what you use to attach the pieces, I.E. buckles, rivets, velcro or whatever. Any help would be greatly appreciated!! Thanks for all amazing advice and help everyone has posted!!
Re: DancinFools Iron Man Mark III Pep File Development
Would love to see this as well, specifically for the helmet and neck piece, if anyone is up for it! TIA!
Would love to see this as well, specifically for the helmet and neck piece, if anyone is up for it! TIA!
Venjix
Well-Known Member
Re: DancinFools Iron Man Mark III Pep File Development
Hey Stealth, did you end up posting the other part of the MKIII calf? I really like your simpler modded file - they're fun and super quick to work with
Hey Stealth, did you end up posting the other part of the MKIII calf? I really like your simpler modded file - they're fun and super quick to work with
STEALTH
Sr Member
Re: DancinFools Iron Man Mark III Pep File Development
You know, I totally forgot about this. I'll try to find some time and do it this week. just pm me to remind me if I forget again.
You know, I totally forgot about this. I'll try to find some time and do it this week. just pm me to remind me if I forget again.
Re: DancinFools Iron Man Mark III Pep File Development
Hey stealth have you completed the other part of the calf? I have everything built and i just need that to finish my legs. Also did anyone ever make an unfold for the thigh additions? I can freehand those if i have to buit i was just wondering.
Thanks to everyone in this thred that made this possible, I am loving my mk3. The first costume I have ever made myself. Thanks.
Hey stealth have you completed the other part of the calf? I have everything built and i just need that to finish my legs. Also did anyone ever make an unfold for the thigh additions? I can freehand those if i have to buit i was just wondering.
Thanks to everyone in this thred that made this possible, I am loving my mk3. The first costume I have ever made myself. Thanks.
VaderArmor
Member
Re: DancinFools Iron Man Mark III Pep File Development
Any progress? and thanks for doing this DF !
Any progress? and thanks for doing this DF !
Bigturc
Sr Member
Re: DancinFools Iron Man Mark III Pep File Development
Hey DF and DF builders,
First of, thanks DF for the work you did on those files, pretty amazing! That said, you convinced me to try to start my own build and now, I put all projects aside and can't stop cutting and gluing!
That said, those new calves are quite a pain in the ass to build! Although, from what I saw in Surreal Studios thread, they're quite a sight when built .. again, I'll see what mine looks like!
Question: when having multiple parts like the calves, let's say I want to keep them all separate, how do you go about applying the first outer polyester/resin/epox? Do you stick them all together with tape and then resin over everything to help the fitting? I figured as much since one by one, they don't fit that perfectly together due to paper warp or glue error margins that eventually end up with small diff in the bending of the part.
Also, as a FYI .. I'm 6'3 about 190. I found that I needed the cod piece to be scaled by 10% and even there, I'm gonna have to cut it up on the side, on the grooved lines to get in! Tony has a real small arse! Also due to my longer legs, I scaled the legs by about 8% .. hopefully, that'll cover the gaps between the parts!
Hey DF and DF builders,
First of, thanks DF for the work you did on those files, pretty amazing! That said, you convinced me to try to start my own build and now, I put all projects aside and can't stop cutting and gluing!
That said, those new calves are quite a pain in the ass to build!
Although, from what I saw in Surreal Studios thread, they're quite a sight when built .. again, I'll see what mine looks like! Question: when having multiple parts like the calves, let's say I want to keep them all separate, how do you go about applying the first outer polyester/resin/epox? Do you stick them all together with tape and then resin over everything to help the fitting? I figured as much since one by one, they don't fit that perfectly together due to paper warp or glue error margins that eventually end up with small diff in the bending of the part.
Also, as a FYI .. I'm 6'3 about 190. I found that I needed the cod piece to be scaled by 10% and even there, I'm gonna have to cut it up on the side, on the grooved lines to get in! Tony has a real small arse!
Also due to my longer legs, I scaled the legs by about 8% .. hopefully, that'll cover the gaps between the parts! Re: DancinFools Iron Man Mark III Pep File Development
Yes tape or glue all your parts together and slice it all up after your done the hardening. I usually leave it all together until I am about 90% done then the shapes all fit proper. As far as scaling you'll have to watch when you do the legs and arms as the width goes up as well as the length so you may have to trim it down or section it at points to be able to fit your size. The COD would be best cast it rubber IMO which is what the original COD and abs were cast in.
Yes tape or glue all your parts together and slice it all up after your done the hardening. I usually leave it all together until I am about 90% done then the shapes all fit proper. As far as scaling you'll have to watch when you do the legs and arms as the width goes up as well as the length so you may have to trim it down or section it at points to be able to fit your size. The COD would be best cast it rubber IMO which is what the original COD and abs were cast in.
Bigturc
Sr Member
Re: DancinFools Iron Man Mark III Pep File Development
Thanks Finhead,
You mean 90% done with the final bondo stages right?
Yeah, I noticed the legs scaled on all 3 axis .. I've never fiberglassed anything yet .. so that will be my first experience .. so I wasn't too sure about keeping the 100% scale then adding on the general height here and there. I'm pretty handy but this is a whole new world for me! So I'll take it one step at a time
Anyway, even the calf, at 108%, I have difficulty fitting my leg in there as it's pretty curvy and unfortunately, my bones don't bend that much to try to fit in! lol
Thanks Finhead,
You mean 90% done with the final bondo stages right?
Yeah, I noticed the legs scaled on all 3 axis .. I've never fiberglassed anything yet .. so that will be my first experience .. so I wasn't too sure about keeping the 100% scale then adding on the general height here and there. I'm pretty handy but this is a whole new world for me! So I'll take it one step at a time
Anyway, even the calf, at 108%, I have difficulty fitting my leg in there as it's pretty curvy and unfortunately, my bones don't bend that much to try to fit in!
lolSimilar threads
