1. Welcome to the Project Runs Forum!

    This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.

    Only Premium Members can start a new run.

    Click here for details on becoming a Premium Member.

    Click here for the complete Classifieds Guidelines.

    Dismiss Notice

Limited Run CW Flash V2 & Reverse FLash cowls Limited Run

Discussion in 'Project Runs' started by TheRocketeer, Apr 15, 2015.

  1. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    I have been working..slowly on a couple new cowls.

    These are screen accurate cowls..as close as you can get without having the prop in your hands ;)

    Cowls will be cast in a tinted (maroon or yellow :) Urethane 40shore rubber and the ear bolts will be cast in 72shore Urethane resin

    Flash version 2.0 which is a 2 piece cowl :) plus 2 ear bolts

    Reverse Flash which is a 1 piece cowl plus 2 ear bolts

    Both these cowls are very different from the version 1, but will be made with the same 40 shore urethane rubber as my other cowls

    We do know now there is a zipper at the back inserted into one of the lines..so no more questions about how to get it on :) and they will fit a 24" head like the other one. The zipper will not be installed, you will need to source that yourself.

    The price will be $265usd + shipping for either...please post interest. They are ready to mold so I just need enough interest to justify molding and doing a run with one or maybe both..enjoy

    Finishing work is $180usd.. completely finished and I will include a zipper but I dont install them.

    Flash 2.0
    Flash_Top_Front.jpg Flash_Back.jpg Flash_Back_Side.jpg Flash_Detail.jpg Flash_Side.jpg
    Flash2.jpg Flash1.jpg Flash.jpg

    Reverse Flash
    Rev_Back.jpg Rev_Front.jpg Rev_Flash_Detail.jpg


    RF1.jpg RF2.jpg
     
    Last edited: Mar 13, 2017
  2. dontfeedmyego

    dontfeedmyego Well-Known Member RPF PREMIUM MEMBER

    Trophy Points:
    735
    Re: CW Flash V2.0 and Reverse Flash cowls

    Down for a reverse flash


    Sent from my iPhone using Tapatalk
     
  3. JKRIB

    JKRIB Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,015
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Down for both! Would you do the less stretchy 60 shore like the Daredevil ones?
     
  4. mackle89

    mackle89 Active Member RPF PREMIUM MEMBER

    Trophy Points:
    441
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Interested in a Reverse Flash for sure!
     
  5. kerbys

    kerbys New Member

    Trophy Points:
    3
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Rocketeer are you going to sell any complete masks?
     
  6. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    I'm not sure what your asking? This is an interest thread for the flash and reverse flash cowls.
     
  7. kerbys

    kerbys New Member

    Trophy Points:
    3
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Sorry I have been speaking to Ian and he said to ask you about a picture of a finished Flash cowl. That's had weathering and the finished ear pieces.
     
  8. LordWast

    LordWast New Member

    Trophy Points:
    2
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Extremely interested in Flash 2.0!!!! maybe even two! Or I might get 1 Flash 2.0 and 1 Reverse Flash.... not sure yet.

    A couple of quick questions:
    - Will the zipper be installed already?
    - Will you offer a finishing service like last time where you attach the ear bolts and paint? If so how much extra is this?
    -Lastly, I have a 22 inch head. do you think with some padding I will be able to make this 2 piece cowl fit and look good?

    I am so pumped for this cowl!
    Thank you so much! It looks so fantastic!
     
  9. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    OK lo0oks like Reverse Flash is winning :) but I would need 10 in before molding for each/either

    On the list :)
    I'm not sure I would want to do a full cowl with 60shore..but I could do something (more layers or a bif of foam in the head part?)

    On the list :)
    Yes there will be finished cowls offered... I will recommend GeneralFrosty and have spoken to him about it.

    On the list :) And no you would need to install the zipper. and the rest is answered above :)

     
  10. LordWast

    LordWast New Member

    Trophy Points:
    2
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Thanks for all the information. I am DEFINITELY in for a flash 2.0 and maybe a second depending on if I have enough saved when it comes tone. (I already have enough set aside for one)
    Also I would be requesting the extra layers or foam and the finishing service.
    I hope you get the other 9 people interested in the flash one. :)

    - - - Updated - - -

    Thanks for all the information. I am DEFINITELY in for a flash 2.0 and maybe a second depending on if I have enough saved when it comes tone. (I already have enough set aside for one)
    Also I would be requesting the extra layers or foam and the finishing service.
    I hope you get the other 9 people interested in the flash one. :)
     
  11. kyrahiko

    kyrahiko New Member

    Trophy Points:
    2
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    bahh I'd love to get the reverse flash but i can't afford it yet. But they definitely look great! looking forward to the outcome :) hope you'l find at least 10 people :]
     
  12. GeneralFROSTY

    GeneralFROSTY Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    2,455
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Kudos for the pristine work! As always, your product quality sets the standard pretty high.
     
  13. Iggy

    Iggy Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,035
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    I am ready for the Flash V2! It looks great! Add me to the list please.

    Glad you are doing this!
     
  14. JKRIB

    JKRIB Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,015
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Okay. Either way, like I said.. down for both!
     
  15. njakus29

    njakus29 Jr Member

    Trophy Points:
    92
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    interested
     
  16. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    thanks..the outcome is the same as what you see...
    Thanks General :)
    Added :)...and it still depends
    Ok sounds good :)
    In which one? I need to know....
     
  17. kyrahiko

    kyrahiko New Member

    Trophy Points:
    2
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Yupp. I meant when it's finished with painting and ear bolts ;) I'm trying to save money for one xD
     
  18. NOMAD202

    NOMAD202 Active Member RPF PREMIUM MEMBER

    Trophy Points:
    461
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Interested in your new regular flash cowl :)
     
  19. ANBUspidey

    ANBUspidey Active Member

    Trophy Points:
    341
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    I am also interested in your Flash 2.0 cowl!
     
  20. staticweb23

    staticweb23 Active Member

    Trophy Points:
    341
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Down for a reverse flash.

     
    Last edited by a moderator: Nov 8, 2018
  21. PCorder086

    PCorder086 New Member

    Trophy Points:
    17
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    I def am interested in a flash 2.0 & ready to send payment for it. Any way to pay extra for a rush fee?

    - - - Updated - - -

    def interested in a flash 2.0 cowl
     
  22. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    Sounds good :)
    On the list :)
    Listed :)
    OK one for RF :)
    On the list..but cant rush if I dont have molds made..need more interest..
     
    Last edited by a moderator: Nov 8, 2018
  23. Halonzo

    Halonzo New Member

    Trophy Points:
    2
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    I am interested in the reverse flash cowl.
     
  24. Mr Mold Maker

    Mr Mold Maker Sr Member

    Trophy Points:
    1,990
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Selling some pieces right now to secure the funds.

    Definitely interested in a Reverse Flash!

    Update: Pieces sold, funds secured. 110% down for the Reverse Flash.
     
    Last edited: Apr 18, 2015
  25. phantomdetectiv

    phantomdetectiv Member

    Trophy Points:
    191
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    I'm interested in a 2.0
     
  26. Fulmetal75

    Fulmetal75 Active Member

    Trophy Points:
    341
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Interested in a flash 2.0
     
  27. kenobibale

    kenobibale Active Member RPF PREMIUM MEMBER

    Trophy Points:
    442
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    put me down as interested in a flash 2.0
    really nice work. never knew the screen used was a 2 piece, interesting design for sure.
     
  28. closdc

    closdc New Member

    Trophy Points:
    3
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Interested in the Reverse Flash Cowl count me in!
     
  29. THESMOKE007

    THESMOKE007 New Member

    Trophy Points:
    3
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    I'm very interested, I have two questions, 1 what is your biggest size and 2 How soon can I order one?

    - - - Updated - - -

    I would like to by one, what is your Paypal and how soon can you send it out?
     
    funny0 and LordWast like this.
  30. funny0

    funny0 Active Member

    Trophy Points:
    242
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    The Reverse Flash cowl looks so cool
     
    Last edited: Apr 18, 2015
  31. Rasillon

    Rasillon New Member

    Trophy Points:
    2
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Im interested in Flash 2.0

    - - - Updated - - -

    Just a quick question, how do you take payment?
     
  32. THESMOKE007

    THESMOKE007 New Member

    Trophy Points:
    3
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D prints

    How soon can I order one?
     
  33. kyrahiko

    kyrahiko New Member

    Trophy Points:
    2
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Uhm other question.. will this also be limited like the last one?
     
  34. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Ok on the flash list :)
    On on the list ;)
    Listed :)
    Flash is winning :)
    On the list, yes the flash 2.0 is a 2 piece and the Reverse flash is a 1 piece.
    OK listed
    Which one would you be interested in? And it is one size, 24" max head size. And there is no mold yet..so we shall see.
    Thanks :) that mean your interested?
    On the list :) and I take PayPal for payments..
    As soon as theres enough interest and then deposits..
    This will be a limited run for now, unless there's enough interest to do future runs..
     
  35. Rasillon

    Rasillon New Member

    Trophy Points:
    2
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Shipping to UK is...?
     
  36. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    You didn't ask that before.. :p but I would need your postal code. Please PM me
     
  37. Rasillon

    Rasillon New Member

    Trophy Points:
    2
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Also is this Cast in Maroon? I've tried to be the impossible -excuse the pun :) - But Urethane is a female dog to paint aha
    Also what are the ear piece bolts cast out of?
     
  38. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Yes its cast out of red/maroon tinted Urethane rubber. The bolts are cast with Urethane resin. Sorry I will update post 1 :)
     
  39. THESMOKE007

    THESMOKE007 New Member

    Trophy Points:
    3
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Very very interested, let me know what you need from me

    - - - Updated - - -

    BTW , I'm a size 24 and it is for the Reverse Flash cowl
     
  40. Mr Mold Maker

    Mr Mold Maker Sr Member

    Trophy Points:
    1,990
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Delete
     
    Last edited: May 13, 2015
  41. Mr Mold Maker

    Mr Mold Maker Sr Member

    Trophy Points:
    1,990
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Double post, sorry!
     
  42. JKRIB

    JKRIB Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,015
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Just curious.. how come Reverse Flash isn't 2 parts as well, C?
     
  43. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Will do. I will send out PM's when I have enough interest :)

    Umm 7 in RF but pretty much....
    Screen accuracy... you'd have to ask the people who make them.. I'm just making them the same as the show :)
     
  44. JKRIB

    JKRIB Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,015
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Ahhh. I always thought it was a 2 piece as well because that line where the back of the head meets the neck was the same as the Flash 2.0 cowl, where the Flash 1.0 was missing it. Hmm weird.
     
  45. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Nope I can tell you 100% that its a one piece and the Flash is 2 piece on the show :)
     
  46. Fulmetal75

    Fulmetal75 Active Member

    Trophy Points:
    341
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    What paint do you recommend to detail the cowl?
    Are you going to offer your chest emblem for this run?
    And can we see side pics of the head on the flash 2.0?
     
  47. Mr Mold Maker

    Mr Mold Maker Sr Member

    Trophy Points:
    1,990
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Delete
     
    Last edited: May 13, 2015
  48. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    I recommend acrylic ink put through an airbrush and hand painted details.
    Nope there are several others making "accurate" chest emblems and belts now..not even sure I'll be making these if interest doesn't pick up...
    When I have a free table again as I am finishing helmets and pouring silicone..no free tables for a few days.
    Ok I'm talking about 100% accurate shape and pieces.. I dont run anything in latex foam.. I dont use latex. If you wanna wait and see if someone else can make a 100% accurate cowl feel free......
     
  49. Mr Mold Maker

    Mr Mold Maker Sr Member

    Trophy Points:
    1,990
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Delete
     
    Last edited: May 13, 2015
  50. TheRocketeer

    TheRocketeer Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,515
    Re: CW Flash V2.0 and Reverse Flash cowls from 3D scan

    Nope no chip..I have the info as well. Thanks though. As I said in the first post 40 shore Urethane rubber :)
     

Share This Page