Interest BTTF Plutonium Fuel Cell Canister ($75 plus $18 shipping) -> Collecting Payment Now

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


markpoon

Sr Member
RPF PREMIUM MEMBER
Our canister is designed based on the actual dimension of the prop store canister so the length of the plutonium rod is correct. There’s another plate that’s glued to the inner & outer tube so water stays inside the canister, no worries


Looks great, markpoon .
Just a little thing on the plutonium bar. Maybe you made it longer on the top part? I see the clear part above the sticker quite long. Clear top part of the bar should be about the same height than the sticker (check original props or movie stills), and your clear part looks longer.
Also, bottom part comes off easily for switching them, but will it be safe to fill the canister with water with the bottom part so easy to remove?
 

Attachments

  • 668B8ABC-9B98-45A6-B49D-DCB585023A19.jpeg
    668B8ABC-9B98-45A6-B49D-DCB585023A19.jpeg
    1 MB · Views: 79

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

dr_slurpee

Sr Member
RPF PREMIUM MEMBER
I’m probably interested in one as well!

Is the rod made from a clear rod that has been painted with transparent red like the original?
 

Roland

Master Member
RPF PREMIUM MEMBER
No, the original screen used rod is not painted, the bottom is transparent while the top is clear red.
Yes, the original rods are painted clear red. Here's a picture of a screen used rod where you can see the red paint flaking. ;)
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Roland

Master Member
RPF PREMIUM MEMBER
It's close enough. ;) To be honest: I would prefer a translucent red rod to a rod which is just painted. 100 % prop accuracy isn't always the best solution.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top