This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
The Amberlith is one of the chokepoints on these. If it comes to it. We may have to chatAlso, do you have an adequate supply of amberlets? I may be able to assist with that if not.
Likewise, but my supply is here in the UKAlso, do you have an adequate supply of amberlets? I may be able to assist with that if not.
Rob OSheaI've been working with the legendary prop house Earl Hays Press for the past year, cataloging and archiving the 107 years of film history that exists within their warehouses.
Among the items found were the original "cuts" (printing blocks) used to make the Deckard ID and every other ID card for "BLADE RUNNER" .
Recently Tested came to Earl Hays Press and Adam Savage and I walked through the process used to make these props, using the original machines from the period that are still in use at Earl Hays.
The folks at Earl Hays, after seeing the response to that and the other videos from Tested filmed in the warehouse, have decided to make a limited number of those ID cards available to the public.
And after some talks with them, they've agreed to open the availability of some of them to RPF members before they're made available to the public.
These are all made by hand, as is shown in the video with Adam. Same process, same machines.
EHP has yet to determine pricing, and the total number made will be based on available material. Which they're in the process of calculating.
If interested, post below to let EHP know how many to open up to RPF members.
These will go for sale probably by the end of the month.
EDIT: Earl Hays, after figuring out costs and material availability has decided to release the initial group of them here on the RPF.
Each of these is hand made, on the same printing press and cutting machine as the originals. These are also printed on the same type of paper stock as the originals.
View attachment 1729832View attachment 1729833
The price through the RPF is $200.00 US.
50 are being made available at this price.
As this post began before a price was known please re affirm interest or income start a completely new thread
1 Shpider
2 jubjub86
3 MandoJedi
4 MandoJedi
5 Docwalker
6 Rockbottom
7 Jakob2121
8 Slimestew
9 userd1402
10 Obie71
11 Juvatwad
12 MrTeabag
13 belloq
14 eethan
15 trooper_trent
16 trooper_trent
17 teecrooz
18 probablyjarrett
19 gonesolo
20 Lanboy
21 Darthwilder
22 Zenwalker
23 Johnnyfl
24 Sweatshop
25 Karlbud420
26 Karlbud420
27 Karlbud420
28 Karlbud420
29 Captain Dunsel
30 Vertex
31 Davidishida
32 Razacrew
33 MarcoCazares
34 RoyDeckard
35 ApostleofColor
36 MML
37 LTcraig
38 Lupinthethird
39 MadCardigan
40 CyberDrunk2069
41 Sam Lowry
42 mhariush
43 Bishop6
44 Zenwalker
45 BenXb4
46 Sengel67
47 AlbertEinstein
48 Nicklambo
49 Confusion
50 Confusion
51 Confusion
52 Sarednab
53 KeyserSoze333
54 Retrogamer7200
55 RickHoward
56 MattMunson
57 FoeHammer
I've been working with the legendary prop house Earl Hays Press for the past year, cataloging and archiving the 107 years of film history that exists within their warehouses.
Among the items found were the original "cuts" (printing blocks) used to make the Deckard ID and every other ID card for "BLADE RUNNER" .
Recently Tested came to Earl Hays Press and Adam Savage and I walked through the process used to make these props, using the original machines from the period that are still in use at Earl Hays.
The folks at Earl Hays, after seeing the response to that and the other videos from Tested filmed in the warehouse, have decided to make a limited number of those ID cards available to the public.
And after some talks with them, they've agreed to open the availability of some of them to RPF members before they're made available to the public.
These are all made by hand, as is shown in the video with Adam. Same process, same machines.
EHP has yet to determine pricing, and the total number made will be based on available material. Which they're in the process of calculating.
If interested, post below to let EHP know how many to open up to RPF members.
These will go for sale probably by the end of the month.
EDIT: Earl Hays, after figuring out costs and material availability has decided to release the initial group of them here on the RPF.
Each of these is hand made, on the same printing press and cutting machine as the originals. These are also printed on the same type of paper stock as the originals.
View attachment 1729832View attachment 1729833
The price through the RPF is $200.00 US.
50 are being made available at this price.
As this post began before a price was known please re affirm interest or income start a completely new thread
1 Shpider
2 jubjub86
3 MandoJedi
4 MandoJedi
5 Docwalker
6 Rockbottom
7 Jakob2121
8 Slimestew
9 userd1402
10 Obie71
11 Juvatwad
12 MrTeabag
13 belloq
14 eethan
15 trooper_trent
16 trooper_trent
17 teecrooz
18 probablyjarrett
19 gonesolo
20 Lanboy
21 Darthwilder
22 Zenwalker
23 Johnnyfl
24 Sweatshop
25 Karlbud420
26 Karlbud420
27 Karlbud420
28 Karlbud420
29 Captain Dunsel
30 Vertex
31 Davidishida
32 Razacrew
33 MarcoCazares
34 RoyDeckard
35 ApostleofColor
36 MML
37 LTcraig
38 Lupinthethird
39 MadCardigan
40 CyberDrunk2069
41 Sam Lowry
42 mhariush
43 Bishop6
44 Zenwalker
45 BenXb4
46 Sengel67
47 AlbertEinstein
48 Nicklambo
49 Confusion
50 Confusion
51 Confusion
52 Sarednab
53 KeyserSoze333
54 Retrogamer7200
55 RickHoward
56 MattMunson
57 FoeHammer
robosheauk