-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Unlimited Run Blade Runner - Deckard's Blaster (Version 3)
- Thread starter rgriesbeck
- Start date
-
- Tags
- blade runner
Re: 3D Printed Blade Runner Gun Kit
I've got some black filament, you'd be part way there
I've got some black filament, you'd be part way there
Re: 3D Printed Blade Runner Gun Kit
I assume you mean printing it all out black?
I'll let you know shortly... check some funds and such...
I assume you mean printing it all out black?
I'll let you know shortly... check some funds and such...
I've got some black filament, you'd be part way there
Re: 3D Printed Blade Runner Gun Kit
I'm in for 1 BR kit with the LEDs.
I'm in for 1 BR kit with the LEDs.
Re: 3D Printed Blade Runner Gun Kit
Big thanks to those who have committed and to those who have paid. The printers are going non-stop, hope to send the 1st 5 kits out by the end of the week
Big thanks to those who have committed and to those who have paid. The printers are going non-stop, hope to send the 1st 5 kits out by the end of the week
Re: 3D Printed Blade Runner Gun Kit
Absolutely! Just follow step 2 and 3 above, thanks
Absolutely! Just follow step 2 and 3 above, thanks
Re: 3D Printed Blade Runner Gun Kit
Hey guys, finally got an hour of free time to get the production version put together with LEDs and screws. It's not painted, but it's a nice representation of what you're getting. I've only got about 10 minutes of sanding. One thing I learned, if you want to keep the text on the barrel, be very careful sanding it :facepalm. I probably could have blown it out and used something to pick around the text, but I'm not really picky, so I just filled and sanded the whole barrel. The text is REALLY small, so careful.
Missing from the pics is the small "rod" that holds the green LEDs, it's proving to be difficult to print, but I think I've got it figured out.
Anyways, here's the pics. Again I hope to have the 1st 5 kits ready withing a week!
Oh ya, I wanted to add that I'll be leaving some of the support structures in place on some of the pieces. Some of these pieces are really small and thin and I feel better shipping the parts with the extra support intact. They're easy to remove with a sharp knife...
Hey guys, finally got an hour of free time to get the production version put together with LEDs and screws. It's not painted, but it's a nice representation of what you're getting. I've only got about 10 minutes of sanding. One thing I learned, if you want to keep the text on the barrel, be very careful sanding it :facepalm. I probably could have blown it out and used something to pick around the text, but I'm not really picky, so I just filled and sanded the whole barrel. The text is REALLY small, so careful.
Missing from the pics is the small "rod" that holds the green LEDs, it's proving to be difficult to print, but I think I've got it figured out.
Anyways, here's the pics. Again I hope to have the 1st 5 kits ready withing a week!
Oh ya, I wanted to add that I'll be leaving some of the support structures in place on some of the pieces. Some of these pieces are really small and thin and I feel better shipping the parts with the extra support intact. They're easy to remove with a sharp knife...
Last edited:
Re: 3D Printed Blade Runner Gun Kit
Very Nice..
Very Nice..
riftmaster
New Member
Re: 3D Printed Blade Runner Gun Kit
Would it be possible to get this shipped to the UK?
Regards,
Would it be possible to get this shipped to the UK?
Regards,
Re: 3D Printed Blade Runner Gun Kit
Absolutely! I ship pretty much everywhere. They are shipped as a sci-fi model kit and I've never had any issues. It's $20.00 to ship to the UK
Absolutely! I ship pretty much everywhere. They are shipped as a sci-fi model kit and I've never had any issues. It's $20.00 to ship to the UK
riftmaster
New Member
Re: 3D Printed Blade Runner Gun Kit
thanks, for the quick reply!
thanks, for the quick reply!
Re: 3D Printed Blade Runner Gun Kit
5 kits almost done, sooo many small pieces, driving me crazy
5 kits almost done, sooo many small pieces, driving me crazy
