RedArc
Member
Blade Runner Blaster with Blaster Core v3 ( Offworld M2019C with metal receiver )
After a long road i already have finished my prototype .
The Blade runner blaster was always my favorite blaster of all times an after hearing about an new Blaster Core run i begun to plan an conversion .
There are not much accurate blasters out there they will let you do such an conversion .
The Offworld Inc model was the best to start with the first time such a project in fact that you can splitt up the blaster fast in its pieces .
The metal receiver give the , mainly made of ABS plastic , blaster an good weight an feel .
I weathered it a little bit in some areas to make it look more used and not brand new out of the box especially at the barrel , butt blade and the trigger guard wich
hurts after some time when you dont sand it down at the under area where the middle finger rests . Now you can hold it long without any pain ^^
The ABS makes it also easy to trimm and cut like you need it but its also an Cram Fu challenge , like nothing before , for me
I my head i would add more features like an led for the single and auto mode , clip detection for the drum and the second trigger working as an aux button
but there was not much space left for such things and i had to throw it overboard :-\
The sound fond making was also an challenge too , in fact that there are not much movie sounds in the net and i had to take all sounds from the movie itself what given me
some headache in the first few hours
The Blaster Core V3.0 ist the best sound board i ever owned and i got it from Plecter Labs .com . Thanks Erv´for your awesome work ! ^^
I´m really happy with my conversion and now i know what´s possible an whats not and so i can go the next step
with an Richard Coyle full metal kit from Propsummit.com a Blade Runner Prop Community Forum BladeRunnerProps.comIndex to build from ground up .
Maybe this is gonna be up for sale in the next time but i´m not sure where , so keep an eye open if you want to snap it
Some glams :
Specs :
2x 10440 protected trustfire for 7,4v
2,1 mm recharge bort in the drum
2w Premium speaker inside the drum
5 red leds in the ammo box for bargraph
2 green 3mm leds on the sight rod for ray flash
2 x ultrabright 5mm red and blue (3,4v , 20ma ,18500 mcd )
for main flash and auxflash in the barrel
rumble motor inside the grip section
sound fonds :
Deckard Blade Runner
Half Life 2 ( combine )
Plecter Blaster
imperial trooper
shotgun
DH-17
I-saber : Blade Runner Tracks ( opening title , Blade runner blues , end title + special one )
YouTube - Blade Runner Blaster FX light and sound with Blaster Core v3 .mov
Thanks for watching !
After a long road i already have finished my prototype .
The Blade runner blaster was always my favorite blaster of all times an after hearing about an new Blaster Core run i begun to plan an conversion .
There are not much accurate blasters out there they will let you do such an conversion .
The Offworld Inc model was the best to start with the first time such a project in fact that you can splitt up the blaster fast in its pieces .
The metal receiver give the , mainly made of ABS plastic , blaster an good weight an feel .
I weathered it a little bit in some areas to make it look more used and not brand new out of the box especially at the barrel , butt blade and the trigger guard wich
hurts after some time when you dont sand it down at the under area where the middle finger rests . Now you can hold it long without any pain ^^
The ABS makes it also easy to trimm and cut like you need it but its also an Cram Fu challenge , like nothing before , for me
I my head i would add more features like an led for the single and auto mode , clip detection for the drum and the second trigger working as an aux button
but there was not much space left for such things and i had to throw it overboard :-\
The sound fond making was also an challenge too , in fact that there are not much movie sounds in the net and i had to take all sounds from the movie itself what given me
some headache in the first few hours
The Blaster Core V3.0 ist the best sound board i ever owned and i got it from Plecter Labs .com . Thanks Erv´for your awesome work ! ^^
I´m really happy with my conversion and now i know what´s possible an whats not and so i can go the next step
with an Richard Coyle full metal kit from Propsummit.com a Blade Runner Prop Community Forum BladeRunnerProps.comIndex to build from ground up .
Maybe this is gonna be up for sale in the next time but i´m not sure where , so keep an eye open if you want to snap it
Some glams :
Specs :
2x 10440 protected trustfire for 7,4v
2,1 mm recharge bort in the drum
2w Premium speaker inside the drum
5 red leds in the ammo box for bargraph
2 green 3mm leds on the sight rod for ray flash
2 x ultrabright 5mm red and blue (3,4v , 20ma ,18500 mcd )
for main flash and auxflash in the barrel
rumble motor inside the grip section
sound fonds :
Deckard Blade Runner
Half Life 2 ( combine )
Plecter Blaster
imperial trooper
shotgun
DH-17
I-saber : Blade Runner Tracks ( opening title , Blade runner blues , end title + special one )
YouTube - Blade Runner Blaster FX light and sound with Blaster Core v3 .mov
Thanks for watching !
Last edited:
