SatsuiNoJXA
Active Member
View attachment 316374
Decided to give this one a shot since no one has really gone for it. So....to start off, what I have is the design so far, not completed.
View attachment 316376View attachment 316375
The design is being made by a friend of mine who was kind enough to work on it for me.
As you can see, Carnage Symbiote tendrils will be wrapped around the legs and arms as displayed in the first picture.
Ben Reilly Spider Symbol will be added soon.and the red sections will have a web brick pattern added as well.
As you see in the original picture, his finger tips are claws and I will make that a reality.
Gonna buy 10 of these and add them to the knuckles of my fingers along with proper protection
View attachment 316381
The upper blade will be spray painted red while the ring stays securely on the knuckle of my suit.
View attachment 316383
Clear Red tubing for the veins. This will be a big part of the suit's design. What I plan to do here is to take a long strip and cut the tubing horizontally in half, that way I can trace the tubing over the veins on the lycra. And should everything work out, I might even work some Red LED's into the tubing that way I can get some really nice Night shots done to show the veins glowing. I know, you never Spider-Carnage's veins glow, but I thought it would add a nice element to the suit.
Finally. The Mask.
I'm gonna go with TJack's standard ASM2 frames.
View attachment 316384
They fit the design pretty well so I will stick with them. BUT in case I ever decide I want to switch the frames at some point, I am going to magnetize these.
View attachment 316385
The mouth is going to be the most difficult part of the build. My goal is to make it look like I have a moving jaw. Something that moves along with my own jawline, but I clearly won't be able to use latex or molding.
Something such as this: View attachment 316387View attachment 316386
It does look big, but I can easily glue the fabric of the mask onto the frame of the mesh, or shave it down to match my jawline.
And I even went as far as to experiment what the mask would look like if I cut the mesh into the shape of Spider-Carnage's Teeth:
I darkened the mask as well, since I will be spray painting it as dark as possible to mesh in with the black mouth area the lycra mask will have that way it sorta looks like it's blending in.
I still have to figure out how I'd be making the piece move with my mouth. I figured cut it to the edges as much as possible and glue it by its frames onto the lycra. Any thoughts??
What do you guys think so far? Any suggestions?
- - - Updated - - -
Could I get a moderator to delete this thread since it won't display my pics. Gonna re do it.
Decided to give this one a shot since no one has really gone for it. So....to start off, what I have is the design so far, not completed.
View attachment 316376View attachment 316375
The design is being made by a friend of mine who was kind enough to work on it for me.
As you can see, Carnage Symbiote tendrils will be wrapped around the legs and arms as displayed in the first picture.
Ben Reilly Spider Symbol will be added soon.and the red sections will have a web brick pattern added as well.
As you see in the original picture, his finger tips are claws and I will make that a reality.
Gonna buy 10 of these and add them to the knuckles of my fingers along with proper protection
View attachment 316381
The upper blade will be spray painted red while the ring stays securely on the knuckle of my suit.
View attachment 316383
Clear Red tubing for the veins. This will be a big part of the suit's design. What I plan to do here is to take a long strip and cut the tubing horizontally in half, that way I can trace the tubing over the veins on the lycra. And should everything work out, I might even work some Red LED's into the tubing that way I can get some really nice Night shots done to show the veins glowing. I know, you never Spider-Carnage's veins glow, but I thought it would add a nice element to the suit.
Finally. The Mask.
I'm gonna go with TJack's standard ASM2 frames.
View attachment 316384
They fit the design pretty well so I will stick with them. BUT in case I ever decide I want to switch the frames at some point, I am going to magnetize these.
View attachment 316385
The mouth is going to be the most difficult part of the build. My goal is to make it look like I have a moving jaw. Something that moves along with my own jawline, but I clearly won't be able to use latex or molding.
Something such as this: View attachment 316387View attachment 316386
It does look big, but I can easily glue the fabric of the mask onto the frame of the mesh, or shave it down to match my jawline.
And I even went as far as to experiment what the mask would look like if I cut the mesh into the shape of Spider-Carnage's Teeth:
I darkened the mask as well, since I will be spray painting it as dark as possible to mesh in with the black mouth area the lycra mask will have that way it sorta looks like it's blending in. I still have to figure out how I'd be making the piece move with my mouth. I figured cut it to the edges as much as possible and glue it by its frames onto the lycra. Any thoughts??
What do you guys think so far? Any suggestions?
- - - Updated - - -
Could I get a moderator to delete this thread since it won't display my pics. Gonna re do it.
