YenChih Lin
Master Member
It's already posted in the Junkyard here: http://www.therpf.com/f13/tron-legacy-font-scratch-106196/
All things Tron Legacy
- Thread starter Soulinertia
- Start date
MooMooEgg
Sr Member
CB2001
Master Member
True, but the problem with using "Tron: Resurrection" indicates that Tron completely died and then came back, which is a bit of a contradiction, since
Tron didn't die, but was just corrupted by CLU 2 after being disabled.
Whereas, "TRON: Corruption" is more applicable in more than one way, such as the Dillingers' possible plans with taking over Encom (with Dillinger Jr. being the inside man, "corrupting" things from the inside) and a possible use of a computer virus "corrupting" the inside of the Encom servers if they decide to use that type of storyline.
But then again, the whole title may fall down into what kind of story is being told.
neosporing
Sr Member
There, now I can sleep.
roflol...
... where'd you get the stands btw... :|
now you made my recognizer look grounded...
Made those little suckers from acrylic rods and disks....
Plexiglass sheets, Acrylic plastic, Lexan sheet, Plexiglass Fabrication, Fiberglass Panels, Teflon
The center crew on the jet is just about the balance point, so I removed the screw for the rod there. The recognizer I had to find the balance point and drill a small hole.
YenChih Lin
Master Member
Where did you find this pic? Would make an awesome beginning of Tron 3… Tron crawling out of the Sea of Simulation and trying to reach anyone…
nickytea
Master Member
It's just a manip I threw together.
YenChih Lin
Master Member
:thumbsup
paulcarson
Well-Known Member
Quick question for you Guys, is the Art of Tron worth picking up ? Is it a making of book or just pre-visual paintings?
Xxblackbird
Sr Member
If anyone has a "Grandview Weekend Outlet" in their area I think you should try looking there. I know there are several in the Kentucky, West Virginia and Ohio area but outside of that I'm not sure. They basically sell surplus, returned and junked stuff from Target (at least Target and I think other retailers too) at seriously discounted prices.
I've found boxes and boxes of Hasbro lightsabers, Clonetrooper and Boba Fett toy helmets there for $1.50 to $5 each. They had one of those 12-inch super-deluxe talking Buzzz Lightyears for $4.95 today.
I have a feeling there will be a lot of Tron stuff there soon (if not already) and it'll probably be a great source for broken or non-functioning Identity Discs for modding. My guess is they'll go for around $5 each. Every store seems to set their own prices for stuff.
The one in my area seems to be on a pretty hefty Prince of Persia kick right now. That crap is everywhere. It's not a place to go shopping for food, medicine or anything electrical... but you can get toys and random junk for props extraordinarily cheap.
Also my local Disney store had all Tron stuff marked down %30 last week. Not sure if that's still going on though.
Xxblackbird
Sr Member
I just punched the name into google and found their crappy website.
Grandview Outlets
Seems they're centralized mainly to my area. Since there are so many around here I thought it was at least an east coast thing. They don't list their locations in West Virginia, though. Unless they've closed recently (or opened since the site was updated) there may be additional locations in different states that aren't on the website. Tennessee isn't that far, and since they opened one in Indiana they may branch down there soon. I have noticed, though, with each new store their inventory seems to diminish.
I usually work weekends and they're only open on weekends, but if I can somehow nab a bunch at dirt cheap I'll spread the wealth around at little to no profit.
If they're anything like Lightsabers... every weekend they would have 5 huge plastic tubs full of dozens of them, some still in boxes, for like $1.50 each. I remember they had tons of the "build your own lightsaber" kits as well as TFU sabers. I bought the crap out of those things and most of them worked fine.
Grandview Outlets
Seems they're centralized mainly to my area. Since there are so many around here I thought it was at least an east coast thing. They don't list their locations in West Virginia, though. Unless they've closed recently (or opened since the site was updated) there may be additional locations in different states that aren't on the website. Tennessee isn't that far, and since they opened one in Indiana they may branch down there soon. I have noticed, though, with each new store their inventory seems to diminish.
I usually work weekends and they're only open on weekends, but if I can somehow nab a bunch at dirt cheap I'll spread the wealth around at little to no profit.
If they're anything like Lightsabers... every weekend they would have 5 huge plastic tubs full of dozens of them, some still in boxes, for like $1.50 each. I remember they had tons of the "build your own lightsaber" kits as well as TFU sabers. I bought the crap out of those things and most of them worked fine.
YenChih Lin
Master Member
on Prologue - Main Titles & Special Sequences - Tron: Legacy you can find the Tron Legacy Disney Sleeping Beauty Castle intro, which IHMO is the most impressive 3D intro to date. I was in awe when seeing this. There are also lots of other things to see there about TL and other movies.
Last edited:
I have a grey one on the way. The screen on these does pop out. You need to take an exacto knife and carefully pull up the plastic. It is just double taped down. There is a demo picture underneath that you can replace with a new photo shot of the movies screen phone pic. The plastic under that is solid, unless you cut it out, you cannot light it from under, but with a photo quality print, it really does not matter too much. For the chip, I would recommend just notching a bay with your Dremel. You really do not need to dis assemble the darn thing as I did.
CB2001
Master Member
I'm still hoping that maybe they'll include the character of Jet from the game as a character in the next film (they don't have to make him exactly like he was in the game, but still include a version of him).
Honestly, I've been trying to find a custom shape for Adobe Photoshop, as I am trying to actually make a chip design using the image (just to see if I can make an image that matches the design). So far, the closest I've seen of the "tron disc" image that is on the chip is a bullseye on a set of flags on the TV show of "Top Shot." But for finding a custom shape for Photoshop, I haven't found one (I may have to do individual shapes, layer on layer).
Honestly, I've been trying to find a custom shape for Adobe Photoshop, as I am trying to actually make a chip design using the image (just to see if I can make an image that matches the design). So far, the closest I've seen of the "tron disc" image that is on the chip is a bullseye on a set of flags on the TV show of "Top Shot." But for finding a custom shape for Photoshop, I haven't found one (I may have to do individual shapes, layer on layer).
Last edited:
Straker
Sr Member
Got a Tron Guy related piece here from Newgrounds. XD Behold! Tron Legacy with Tron Guy!
http://e621.net/data/ce/bf/cebf73bde67faad81e07f3d90c88d90d.swf
http://e621.net/data/ce/bf/cebf73bde67faad81e07f3d90c88d90d.swf
Similar threads
