-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run 2015 Marty McFly Jacket - Shipping Now!!!
- Thread starter markpoon
- Start date
Petowalker
Well-Known Member
Re: 2015 Marty McFly Jacket - 11 spots left!
Hi Mark, so would you reconsider to offer some even in Smaller size?
Sent from my D6503 using Tapatalk
Hi Mark, so would you reconsider to offer some even in Smaller size?
Sent from my D6503 using Tapatalk
Re: 2015 Marty McFly Jacket - 11 spots left!
Hi Taff83,
thanks & I appreciate it
well, I always offer my props at a really good price here, an example will be my jumanji boards, I sold them for $400+ here & they're selling on eBay for $1,500.
Hi Everyone,
if you're still sitting on the fence, don't wait any longer because I can almost guarantee you'll end up paying double when I sell them on eBay eventually
- - - Updated - - -
Hi Petowalker,
I'm pretty sure a M size fits me but I'll try to get the measurements for a S size & will post it soon
Hi Taff83,
thanks & I appreciate it
well, I always offer my props at a really good price here, an example will be my jumanji boards, I sold them for $400+ here & they're selling on eBay for $1,500.Totally agree with you 100% !
Mark deserves a massive round of applause for all his hard work and determination on this, another great piece by another great rpf'er
End of the day we all know these will sell like hot cakes on eBay, we are just fortunate that Mark has offered this to the community first.
Hi Everyone,
if you're still sitting on the fence, don't wait any longer because I can almost guarantee you'll end up paying double when I sell them on eBay eventually
- - - Updated - - -
Hi Petowalker,
I'm pretty sure a M size fits me but I'll try to get the measurements for a S size & will post it soon
Petowalker
Well-Known Member
Re: 2015 Marty McFly Jacket - 10 spots left!
That's great and appreciate with your work.
Sent from my D6503 using Tapatalk
That's great and appreciate with your work.
Sent from my D6503 using Tapatalk
Re: 2015 Marty McFly Jacket - 11 spots left!
Thank you!Hi Taff83,
I'm pretty sure a M size fits me but I'll try to get the measurements for a S size & will post it soon
booshman
Well-Known Member
Re: 2015 Marty McFly Jacket - 10 spots left!
Hi Mark, I'm interested, but I have a few questions:
You say each jacket is made to measure. Do you want individual measurements, or are you only doing set S, M, L sizes?
Are the cuffs and waist going to be gathered by the seamstress?
With them being hollow, how are the belt and cuffs glued on to the jacket?
Do you have an estimated date for when you will have the jackets ready to ship?
Thanks
Hi Mark, I'm interested, but I have a few questions:
You say each jacket is made to measure. Do you want individual measurements, or are you only doing set S, M, L sizes?
Are the cuffs and waist going to be gathered by the seamstress?
With them being hollow, how are the belt and cuffs glued on to the jacket?
Do you have an estimated date for when you will have the jackets ready to ship?
Thanks
Re: 2015 Marty McFly Jacket - 10 spots left!
Hi Stoney,
MJF is a small guy & I was told he wears size M.
Hi Stoney,
MJF is a small guy & I was told he wears size M.
Re: 2015 Marty McFly Jacket - 10 spots left!
Hi booshman,
1. I'm only offering standard sizes (M, L, XL & XXL) & I'm now checking with my tailor on size S.
2. no, you can do this yourself when you attach the waist belt.
3. you can use any form of strong glue to attach the wrist & waist belts & this one works great for me:
3. the belts are made from a soft type of plastic so you can choose to sew them onto the jacket.
4. I expect to ship them in 4 weeks time (end june).
Hi booshman,
1. I'm only offering standard sizes (M, L, XL & XXL) & I'm now checking with my tailor on size S.
2. no, you can do this yourself when you attach the waist belt.
3. you can use any form of strong glue to attach the wrist & waist belts & this one works great for me:
3. the belts are made from a soft type of plastic so you can choose to sew them onto the jacket.
4. I expect to ship them in 4 weeks time (end june).
Last edited:
Re: 2015 Marty McFly Jacket - 10 spots left!
Hi jvon,
you can send $104 to:
poonwkstarhub@gmail.com
to secure your spot & I'll keep everyone posted about the S size as soon as I hear from my tailor, thanks.
Hi jvon,
you can send $104 to:
poonwkstarhub@gmail.com
to secure your spot & I'll keep everyone posted about the S size as soon as I hear from my tailor, thanks.
Re: 2015 Marty McFly Jacket - 10 spots left!
When do you think we will see a 100% completed jacket?
When do you think we will see a 100% completed jacket?
Re: 2015 Marty McFly Jacket - 10 spots left!
Hi MitasTouch,
I plan to get my tailor to make me a size M, I'll put it together & will post pictures for all to see
- - - Updated - - -
Hi Stoney,
the belts are the same, they are professionally made (not cast at home) & the tooling cost nearly killed the entire project.
Hi MitasTouch,
I plan to get my tailor to make me a size M, I'll put it together & will post pictures for all to see
- - - Updated - - -
Hi Stoney,
the belts are the same, they are professionally made (not cast at home) & the tooling cost nearly killed the entire project.
Greeky04
Well-Known Member
Re: 2015 Marty McFly Jacket - 10 spots left!
Can you take me off the list please. I really want the 2015 jacket but there seem to be too many inaccuracies with this one. I may never get the chance again to buy a 2015 jacket but thats a chance ill take. Glad you got this far with the jacket and im sure people will love it.
Can you take me off the list please. I really want the 2015 jacket but there seem to be too many inaccuracies with this one. I may never get the chance again to buy a 2015 jacket but thats a chance ill take. Glad you got this far with the jacket and im sure people will love it.
Re: 2015 Marty McFly Jacket - 10 spots left!
What inaccuracies do you see? The only one that is clear to me is that the red material isnt big enough on the pockets, but Mark said he notified the tailor.
What inaccuracies do you see? The only one that is clear to me is that the red material isnt big enough on the pockets, but Mark said he notified the tailor.
Re: 2015 Marty McFly Jacket - 10 spots left!
Having the belt separate from the jacket will turn out to be a very good thing. The real jacket belt doesnt extend past Marty's belt line on his pants, so you can just glue the belt in a custom spot if the jacket goes past that on yours. Then trim and seal any extra material that is hanging off.
Having the belt separate from the jacket will turn out to be a very good thing. The real jacket belt doesnt extend past Marty's belt line on his pants, so you can just glue the belt in a custom spot if the jacket goes past that on yours. Then trim and seal any extra material that is hanging off.
Greeky04
Well-Known Member
Re: 2015 Marty McFly Jacket - 10 spots left!
MitasTouch I agree the belt being separate could be a good thing for fit and finish but I believe that should come down to choosing the right sizing too. But as far as my reasoning for pulling out, well like you said the red area in the pocket should go pretty much to the edge of the side and bottom of the pockets. While we are on pockets, the screen used jacket does not have stitching on the pocket flaps or where it attaches to the jacket. And the flaps have velcro which yes could be removed but shouldnt be there in the first place. Also I would rather the whole jacket be made of latex rubber, not just the red sections. sleeves and pocket flaps be latex rubber also, not faux leather as thats not how the screen used one is.
MitasTouch I agree the belt being separate could be a good thing for fit and finish but I believe that should come down to choosing the right sizing too. But as far as my reasoning for pulling out, well like you said the red area in the pocket should go pretty much to the edge of the side and bottom of the pockets. While we are on pockets, the screen used jacket does not have stitching on the pocket flaps or where it attaches to the jacket. And the flaps have velcro which yes could be removed but shouldnt be there in the first place. Also I would rather the whole jacket be made of latex rubber, not just the red sections. sleeves and pocket flaps be latex rubber also, not faux leather as thats not how the screen used one is.
Last edited by a moderator:
Similar threads
