$20 Near-Screen Accurate Grant Raptor Claw (with a catch)

[VashDstampede]

I just sanded the areas that needed to be filled and about 1/6” around those edges for overlap with 250 grit sandpaper, taking away the clear coat and paint.
I then filled it with Magic Sculpt (epoxy clay) and shaped it by hand, then with water and a small brush to shape and blend as best as I could. When it dried, I rough sanded then wet sanded it to blend.
I would have shaped it a little bit more, but I was too lazy to take out my Dremel.

 

[PHArchivist]

I just sanded the areas that needed to be filled and about 1/6” around those edges for overlap with 250 grit sandpaper, taking away the clear coat and paint.
I then filled it with Magic Sculpt (epoxy clay) and shaped it by hand, then with water and a small brush to shape and blend as best as I could. When it dried, I rough sanded then wet sanded it to blend.
I would have shaped it a little bit more, but I was too lazy to take out my Dremel.

Excellent work

 

[Funky]

I just sanded the areas that needed to be filled and about 1/6” around those edges for overlap with 250 grit sandpaper, taking away the clear coat and paint.
I then filled it with Magic Sculpt (epoxy clay) and shaped it by hand, then with water and a small brush to shape and blend as best as I could. When it dried, I rough sanded then wet sanded it to blend.
I would have shaped it a little bit more, but I was too lazy to take out my Dremel.

That turned out great!!!