1966 tv Batmobile 1/6th scale

[kermet]

Okay been in the shop about all day and I went on and stayed with the two bats I already cut and just made two more big pain making them also I didn't want to haze the chrome wheels with super glue so I made some extensions to hold the bats in place these where attached with small screws and worked out fine here's the pics and a bunch of them. so stay tuned more to come same bat channel same bat time POW Thanks....Jim

 

[Vacformedhero]

POW is right, great work

 

[kermet]

Thanks a lot Vac each step seems to involve a bunch of small parts to be made but after all the cutting arm super glued to the work table I was stuck for quite a while couldn't even reach my phone so I used a spatula to get free LOl many strange bumps in the road but after all that I think its looking more like it should. I await on more parts to come then the bubbles to be made. The car has a complete under side which I will be detailing so as always,,,Stay Tuned More To Come. Thanks....Jim

 

[kermet]

Thanks a lot Vac each step seems to involve a bunch of small parts to be made but after all the cutting arm super glued to the work table I was stuck for quite a while couldn't even reach my phone so I used a spatula to get free LOl many strange bumps in the road but after all that I think its looking more like it should. I await on more parts to come then the bubbles to be made. The car has a complete under side which I will be detailing so as always,,,Stay Tuned More To Come. Thanks....Jim

 

[naigon]

Great work on this, very tiny details that you added for the 1/16th scale.

 

[kermet]

Yes thank you naigon this car is really 1/6th scale this car will fit the hot toys batman and robin figures perfectly. a lot of the tiny details are all hand made. stay tuned more to come. Thanks....Jim

 

[brandomack]

Beautiful work!

 

[kermet]

Thanks brandomack, I will soon be taking pics of the car with the hot toys batman and robin figures but before this happens I want to have the car complete and the build done. Yep these figures fit the car I wish I could and still might sculpt up a alfred head for a hot toys body and have him dusting the car or something Lol I have been studying this and the way I am I will have a alfred to go along with the car. More to come stay tuned. Thanks.....Jim

 

[kermet]

Okay got busy again as said this car has a complete under chassis and the detail work on this is all done. here's some pics of the results. stay tuned more to come. Thanks....Jim

 

[Vacformedhero]

When your taking your final shots , can you do me favour and take an overhead shot straight down on it , I always think that's the best view of many of my favourite vehicles

 

[kermet]

No problem Ill do this just for you, I will go ahead and give one of these shots now then when finished. Vac you know you was most for sure a big help with your imput on the door hinge and those inner door shots showed lots of detail like those knobs that was cool stuff. Yep you helped in a big way when I was stuck on the door hinge. Ill have you some pics here in a bit been busy with grandsons. Thanks....Jim

 

[kermet]

Here ya go Vac, stay tuned more to come.Thanks....Jim

 

[Vacformedhero]

Here ya go Vac, stay tuned more to come.Thanks....Jim View attachment 617444View attachment 617448View attachment 617451

thanks Jim, looking great

 

[kermet]

Your Welcome.....Thanks....Jim

 

[kermet]

Well everyone that has been watching this thread I want to say thanks a bunch for all you cool comments and Vac for the imput needed to finish the door part. As for the moment I am waiting on parts to finish it up, I am sorry for the delay. I know the more to come has kinda hit a wall but I will complete the car. Kinda been getting saber stuff in order parts and stuff and got a bit off track so now back on focus and back to the build. Pics coming soon. stay tuned. Thanks....Jim

 

[Vacformedhero]

Hey , don't apologise , sometimes by stepping away it gives you the break to ensure when you finish it you'll be fresh again, well done and glad the screen shot of the hinge helped .

 

[kermet]

Yep the screen shot was great, and I have step away for a bit just trying to get into this saber 2.0 build getting parts in order to get this done. I bought 8 sabers from korbanth to build. Also doing this I have spent over 3 G for everything at this point and still have more parts to buy. I as well have to buy a vac table which will save me on the long run of building one. At the moment wife has put me on hold on my spending which wont last long just got to let her spend a bit then its back on. I have spent more than that counting the mask and models and the fx black sabers I have got like 5 of them Oh well I can wait a bit and as you said Vac got to step away sometimes but I am a model junky and can't get enough I get dizzy when I'm not modeling. But there is more to come so stay tuned. Thanks....Jim

 

[joberg]

Looking impressive!!

 

[kermet]

Thanks, for your kind words. Wont be to much longer. Thanks....Jim

 

[kermet]

Okay been waiting on funds to get everything needed to get the car all done. I will be ordering a vac table and a heater, shop vac, and the plastic for the wind shields also the clay to make the plugs out of. I was rolling along then hit a wall, I got this settlement and they are giving it to me bi weekly my lawyer is trying to get a lump sum just waiting shouldn't be much longer. I have everything needed in cart ready to buy. so just a bit of a update stay tuned don't want to miss anything. Thanks.....Jim