ddf27
Active Member
Hey guys
Here's a link for the files that I was able to finish so far.
Iron Man Mark 7 by David F. - 4shared
https://www.mediafire.com/folder/a7knxsmlea287/Iron_Man_Mk7
It will contain pepakura, foam, .obj files and .stl files for 3d print, so choose your way and good luck.
I tried to make it easy to build, with as much details as I could.
If you want, post some pictures of your build, I would love to see how it turns out.
Here's a list of the parts that I have so far on that folder:
Abs: All files uploaded.
Arms: .stl and .obj file uploaded
Boots: -
Cod: pep, .stl and .obj files uploaded
Helmet: .stl and .obj file uploaded
Legs: .stl and .obj file uploaded
Neck: .stl and .obj files uploaded
Torso: .stl and .obj files uploaded
Special thanks to:
- streetsoul for unfolding it to pepakura
- Kryro for unfolding it to foam
- Chipsahoyes for cutting the .stl files
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hey guys,
After lots of time searching for a good 3d model of Iron Man Mk VII (the one on Avengers), I decided to do it myself.
Since I'm a bit perfectionist, I'm trying to make one as close as possible to the one in the movies, but be patient with me, because I learnt 3d modelling in 20 minutes and this is actually my first try, so any suggestion and help is appreciated.
Here is my progress so far, the upper part doesn't have many details yet, because I wanted to finish the legs first and work my way up.
Here's a link for the files that I was able to finish so far.
Iron Man Mark 7 by David F. - 4shared
https://www.mediafire.com/folder/a7knxsmlea287/Iron_Man_Mk7
It will contain pepakura, foam, .obj files and .stl files for 3d print, so choose your way and good luck.
I tried to make it easy to build, with as much details as I could.
If you want, post some pictures of your build, I would love to see how it turns out.
Here's a list of the parts that I have so far on that folder:
Abs: All files uploaded.
Arms: .stl and .obj file uploaded
Boots: -
Cod: pep, .stl and .obj files uploaded
Helmet: .stl and .obj file uploaded
Legs: .stl and .obj file uploaded
Neck: .stl and .obj files uploaded
Torso: .stl and .obj files uploaded
Special thanks to:
- streetsoul for unfolding it to pepakura
- Kryro for unfolding it to foam
- Chipsahoyes for cutting the .stl files
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hey guys,
After lots of time searching for a good 3d model of Iron Man Mk VII (the one on Avengers), I decided to do it myself.
Since I'm a bit perfectionist, I'm trying to make one as close as possible to the one in the movies, but be patient with me, because I learnt 3d modelling in 20 minutes and this is actually my first try, so any suggestion and help is appreciated.
Here is my progress so far, the upper part doesn't have many details yet, because I wanted to finish the legs first and work my way up.
Last edited: