Socker
Jr Member
Hi Judges and Citizens, some already know about this build, and you have followed the process in the Brit-Cit group, I've seen the movie no longer the times,
I started my costume this past summer and have been slowly gathering information and parts on Run's or I've been making for myself,
then a week ago, I decide to look for information on the group and here in the forum, about the Alvarez shotgun, I found few references, since hardly goes a few seconds in the film, I saw that the weapon was a basis Frenchi Spas 12 and look for a Airsoft replica to start this project, the Judge friend Iain Souter, send me some pictures with some more detail, which have helped me a lot in developing..
I hope you like my project In this prop.
Reference Pictures:
http://www.imfdb.org/images/thumb/f/ff/Dredd_SPAS2.jpg/600px-Dredd_SPAS2.jpg
http://www.imfdb.org/images/thumb/5/55/Dredd_SPAS-1.jpg/600px-Dredd_SPAS-1.jpg
http://www.therpf.com/attachments/f...ry-28th-prop-147a-2-_wm.jpg-136265d1357934636
Frenchi Aisoft that I use for base.
The mag, scaled with a lawgiver mag and frenchi shotgun, I've used various thicknesses of ABS.
At this point, the sliding load is very long and must be cut and adapted to the shape you see on screen.
Now time to start putting layers and make the gun body sections.
Disassemble the replica, to modify the ejection port, later be impossible to do so to be sealed the replica and I continue to working..
More in the next post ..
I started my costume this past summer and have been slowly gathering information and parts on Run's or I've been making for myself,
then a week ago, I decide to look for information on the group and here in the forum, about the Alvarez shotgun, I found few references, since hardly goes a few seconds in the film, I saw that the weapon was a basis Frenchi Spas 12 and look for a Airsoft replica to start this project, the Judge friend Iain Souter, send me some pictures with some more detail, which have helped me a lot in developing..
I hope you like my project In this prop.
Reference Pictures:
http://www.imfdb.org/images/thumb/f/ff/Dredd_SPAS2.jpg/600px-Dredd_SPAS2.jpg
http://www.imfdb.org/images/thumb/5/55/Dredd_SPAS-1.jpg/600px-Dredd_SPAS-1.jpg
http://www.therpf.com/attachments/f...ry-28th-prop-147a-2-_wm.jpg-136265d1357934636
Frenchi Aisoft that I use for base.
The mag, scaled with a lawgiver mag and frenchi shotgun, I've used various thicknesses of ABS.
At this point, the sliding load is very long and must be cut and adapted to the shape you see on screen.
Now time to start putting layers and make the gun body sections.
Disassemble the replica, to modify the ejection port, later be impossible to do so to be sealed the replica and I continue to working..
More in the next post ..