WIP: EVA foam Iron man build

[hyperguyver2]

*SCRAPPED*
Hello RPF! I am attempting my first Eva build and I figured that the Iron Man MK VI armor would be a good start. Thanks to Stealth and so many others who devloped the pep files that make this project possible! So far I have all the parts for the chest plate cut and will begin glueing tonight. So far it has definatly been a challenge but very fun. The chest and back will be made of 1/2 inch foam and the rest 1/4 in foam. Here's my dilemma, I cannot fine 6mm, 8mm or 1/4 eva foam anywhere in my area and I tried searching the forum for the information, but I'm having no luck. Where can I buy the 1/4 inch foam for this project? If all goes well either today or tomorrow I should be able to post the progress of the chest plate

 

[hyperguyver2]

Sorry I have not been able to post the pictures of my progress on this project, currently in the process of changing net providers, I can only check the thread at work. I have 6 days worth of progess pics I will post as soon as I get the net back up at home

 

[Tonyfatumvw]

Theres a web site that sell Eva foam u could try http://www.foamorder.com/

 

[hyperguyver2]

Theres a web site that sell Eva foam u could try Foam Mattress Pads | Memory Foam | Platform Beds | Bedroom Furniture | patio cushions

Thanks Tony! I just found this site the other day and had placed an order for a sheet of the EVA grade foam, once it comes in I can complete the process

 

[Tonyfatumvw]

No problem man glad to help looking forward to seein the iron man build

 

[hyperguyver2]

Finally a pic update as promised, theres about 16 days worth of work in this so far, its not the best looking build but since this is proving much easier and less expensive than I thought I plan to rebuild a few parts down the road when my foam-fu has improved, mainly the back abodminal plate (I'll admit im a bit too fat for this but i'll make it work). I also managed to find foam mats at Sears for around $25 in 1/4 in thickness in 90x 40 sheets, gotta love the fitness dept sometimes

 

[hyperguyver2]

I have completed the cod piece but I've ran into a problem, I've already expaned the patern 10% and it first properly but I cannot put it on without bursting a seam. I used the templates provided by stealth, but is there a way to install velcro in the sides of the part without changing its look?

 

[mushroomhunter]

That is looking awesome dude! I am about to start my build soon too. I was able to purchase some 8mm foam on Amazon a few months back. Was gonna use it for a home gym, but it didn't really pan out. I've decided to use it for the build, which seems to be perfect for it.

Good luck on your suit!

 

[hyperguyver2]

That is looking awesome dude! I am about to start my build soon too. I was able to purchase some 8mm foam on Amazon a few months back. Was gonna use it for a home gym, but it didn't really pan out. I've decided to use it for the build, which seems to be perfect for it.

Good luck on your suit!

Thanks you very much, ill keep my eyes open for your build

 

[Darth Sparrow]

So you are using stealths templates? My question is, if you don't mind me asking, what size are you like chest and waist wise. You seem to be about my build and I'm wondering how much did you scale everything up? trying to figure all the details out cause Ill be starting my build soon.

 

[hyperguyver2]

So you are using stealths templates? My question is, if you don't mind me asking, what size are you like chest and waist wise. You seem to be about my build and I'm wondering how much did you scale everything up? trying to figure all the details out cause Ill be starting my build soon.

I am using Stealth (really Robo's) templates, I wear a Large when it comes to my shirts, I did not need to alter the size of the chest at all. Im a 38 waist so I had to increase the cod size by 10% and now the cod fits properly but I need to find a way to alter it to make it easier to put on and not risk breaking a seam while suiting up. Since I have a bit of a "beer belly" I had to increase the abdominal section by 10% as well. Hope this helps.

 

[Kurtis876]

man looks very cool! hope to see more!

 

[hyperguyver2]

hey all sorry ive been out a while. been without net, had some marital issues but things are finally ready for me to get back to work. ive got a few small updates but not alot. I am also finding that I am missing some parts (the covering for the hand, and the hip pods) does anyone know where I can get these missing peices? Heres where I stand so far.

 

[JFcustom]

You'll find your missing parts here.

I'm to the point where I am painting some of my parts. I have noticed that after the foam is sealed and painted some of the "power" residue will come off when handled is there a particular type of paint or clear coat that I should be using?

I've bought a half dozen of this. It's magic ! A bit expensive, but for the very last coat it gives to your suit the beautifull aspect of a brand new truck.

Google translates :

Universal acrylic paint quick-drying for decorative applications.
Suitable for protecting and securing media paper, canvas, wood, copper, brass, aluminum, glass, ceramic, bread dough, flowers and herbs.
One lasting shine, Varnish plasticizer is resistant to external conditions, shocks and scratches.
Plasticizer MOTIP Varnish is unalterable and protects against oxidation and UV rays.

 

[hyperguyver2]

You'll find your missing parts here.


I've bought a half dozen of this. It's magic ! A bit expensive, but for the very last coat it gives to your suit the beautifull aspect of a brand new truck.

Google translates :

Universal acrylic paint quick-drying for decorative applications.
Suitable for protecting and securing media paper, canvas, wood, copper, brass, aluminum, glass, ceramic, bread dough, flowers and herbs.
One lasting shine, Varnish plasticizer is resistant to external conditions, shocks and scratches.
Plasticizer MOTIP Varnish is unalterable and protects against oxidation and UV rays.

It sounds pretty awsome not gunna lie, unfortunately I am dont know how to use a .rar file so I cannot open it. When it comes to computers im a total n00b.

 

[JFcustom]

A rar file is like a zip file. You need to download and install WinRAR to open rar files. It aslo opens zip files and many other archive formats.

 

[hyperguyver2]

A rar file is like a zip file. You need to download and install WinRAR to open rar files. It aslo opens zip files and many other archive formats.

I tired using this program but for some reason I cannot get these to work, Is there another way for me to get these missing parts?

 

[JFcustom]

Try an older version, maybe ?
Download WinRAR for Windows | Old Version.com

 

[hyperguyver2]

Hey guys I'm just posting to say that the project is currently on hold due to some budget issues and several parts being damaged in a move. I'm hoping to have this done in time for the Iron Man 3 premier, once I resume my work I'll post the progress

 

[hyperguyver2]

We'll folks I am sad to announce that this project has offically been scrapped. The recent move and now a bitter divorce has depleted me of my funds and with the movie comin up next week it I not posible for me to complete this in time.