PizzyMan
Active Member
I'll be resuming this costume in full force over the next few months!
Yea agreed, I don't see what else you need to do side from the shield and the sword, it looks amazing man.
What costumes are you working on?
- Thread starter Mieal Deneb
- Start date
Yea agreed, I don't see what else you need to do side from the shield and the sword, it looks amazing man.
Three big things really...
1 Modify the wig color to accuracy...
2 mold my new ear sculpts
3 finish the sewing details. (If I don't decide to remake the tunic anyway)
... and then of course, finish the sword/sheath and shield... I guess that is the main thing.
1 Modify the wig color to accuracy...
2 mold my new ear sculpts
3 finish the sewing details. (If I don't decide to remake the tunic anyway)
... and then of course, finish the sword/sheath and shield... I guess that is the main thing.
rmschneider104
Sr Member
I am still working on my ROTJ Fett... taking forever.
TMP
Sr Member
Working on Several Custom projects:
1: ULTRON ARMOR: Enemy of Ironman:
2: S.H.I.E.L.D.: Custom Armor.
3. Humanoid Robot costume.
4. Samurai Modern tec armor.
Projects i love to do for comissions are:
Lex Luthor armor... Here is a teazer photo for the idea.
Dr Doom Armor.
Crimson Dynamo.
Batman Armor.
Capt America Stark Industry Tec armor.
Samus.
1: ULTRON ARMOR: Enemy of Ironman:
2: S.H.I.E.L.D.: Custom Armor.
3. Humanoid Robot costume.
4. Samurai Modern tec armor.
Projects i love to do for comissions are:
Lex Luthor armor... Here is a teazer photo for the idea.
Dr Doom Armor.
Crimson Dynamo.
Batman Armor.
Capt America Stark Industry Tec armor.
Samus.
Last edited:
I'm upgrading a lot of my Indy gear components right now and just dropped a good bit of cash on pretty much everything I need for some ANH Stormtrooper armor (waiting on my boot size to come back in stock)
Other than those I really can't afford the time or money for another costume - though sometime this year I am hoping to get an accurate Scream killer robe.
Other than those I really can't afford the time or money for another costume - though sometime this year I am hoping to get an accurate Scream killer robe.
Dutchman
Well-Known Member
Three big things really...
1 Modify the wig color to accuracy...
2 mold my new ear sculpts
3 finish the sewing details. (If I don't decide to remake the tunic anyway)
... and then of course, finish the sword/sheath and shield... I guess that is the main thing.
Looks amazing already!!
battrooper
New Member
Am new round here... I am putting together a Batman 89 suit...
catfishpkt
New Member
Working on several for Hedo II trip this summer
Future Night: Tron Sam for me modified Quorra for her
Toga Night: 300 King Leonidas
Fetish Night: Captain Jack Sparrow (OMG underestimated)
Also starting desiging Captain America for premier
Future Night: Tron Sam for me modified Quorra for her
Toga Night: 300 King Leonidas
Fetish Night: Captain Jack Sparrow (OMG underestimated)
Also starting desiging Captain America for premier
Avalon
New Member
Currently, I am working and designing 3 costumes.
Aayla Secure/darth talon- working on lekku's
Machiko- working on armor pieces
Infested Kerrigan- design and planning for the first step, the body cast
I also started sewing rave wear when i get bored of working on the other three. I enjoy lots of projects. :love
Aayla Secure/darth talon- working on lekku's
Machiko- working on armor pieces
Infested Kerrigan- design and planning for the first step, the body cast
I also started sewing rave wear when i get bored of working on the other three. I enjoy lots of projects. :love
Driod/Clone helmet
I'm working on kind of a fan fiction piece.
It's a clone helm modded to look like a droid took it to hide and "survive" after the clone wars.
This was kind of inspired by a combo of Johnny5, HK-47 from KotOR, B1-66ER from the animatrix.
I guess the back story in my head was what happened to the droids? Didn't the clones capture any and try to reverse engineer them to intercept communications or use them as spys or something like that?
What would happen if one of these droids that were tampered with or damaged didn't get shut off when vader threw the switch? What if it without a command signal the droid gain a kind of free will, and the instinct to survive and upgrade itself? (since this kind of thing has happened before in the SW universe)
I have the eletronics for voice changer done. hooked up to a line of LEDs that light up when i talk.
The helmet kinda is on hold till i get some more lighting delivered. (the area under the "cheeks" are going to glow red from the overhanging section)
Those eyes are currently little mermaid dixie cups...
Trying to decide if I'm going to go with the round eyes or your standard clone visor.
I even got this arm blaster thing to add to this project later
If anyone has any suggestions or tips I'd appreciate them
I'm working on kind of a fan fiction piece.
It's a clone helm modded to look like a droid took it to hide and "survive" after the clone wars.
This was kind of inspired by a combo of Johnny5, HK-47 from KotOR, B1-66ER from the animatrix.
I guess the back story in my head was what happened to the droids? Didn't the clones capture any and try to reverse engineer them to intercept communications or use them as spys or something like that?
What would happen if one of these droids that were tampered with or damaged didn't get shut off when vader threw the switch? What if it without a command signal the droid gain a kind of free will, and the instinct to survive and upgrade itself? (since this kind of thing has happened before in the SW universe)
I have the eletronics for voice changer done. hooked up to a line of LEDs that light up when i talk.
The helmet kinda is on hold till i get some more lighting delivered. (the area under the "cheeks" are going to glow red from the overhanging section)
Those eyes are currently little mermaid dixie cups...
Trying to decide if I'm going to go with the round eyes or your standard clone visor.
I even got this arm blaster thing to add to this project later
If anyone has any suggestions or tips I'd appreciate them
stmike73
New Member
After going a bit nuts the last couple years I'm trying to dial it back this year. Only working one two in anticipation of Dragon Con 2011.
WWII Luftwaffe Pilot (duty / walking out uniform) - Possibly a flight jacket version
WWII US Paratrooper - Combat uniform / barracks
Side work....
Finally finish my SW biker scout
Tweak my TWOK bomber jacket. Wonderful piece but in serious need of tailoring.
WWII Luftwaffe Pilot (duty / walking out uniform) - Possibly a flight jacket version
WWII US Paratrooper - Combat uniform / barracks
Side work....
Finally finish my SW biker scout
Tweak my TWOK bomber jacket. Wonderful piece but in serious need of tailoring.
abaddon1974
Active Member
I am still very new on this forum, but at the moment I am working on.
ANH Tusken, sewing robes at the moment, most of the rest is done, but I still need to make a gaffi.
Snow trooper, not done a lot yet, but determined to have one this year.
Darth Maul, this one will be a long job.
Craig
ANH Tusken, sewing robes at the moment, most of the rest is done, but I still need to make a gaffi.
Snow trooper, not done a lot yet, but determined to have one this year.
Darth Maul, this one will be a long job.
Craig
CelticRuins
Sr Member
There's so many costumes on my list -_-. But I have to minimize! So this year I'll hopefully knock out the following for myself and boyfriend:
1. TRON Siren and Disc Wars Program
2. Sarah and Jareth from 'Labyrinth'
3. Jessica 6 from 'Logan's Run'...the Sandman is already complete: http://www.therpf.com/f24/logans-run-sandman-costume-mannequin-75425/index3.html
Stuff I'd LOVE to complete this year, but $10 says, I won't be able to -_-:
1. Rogue and Gambit, circa 90's X-Men cartoon
2. Start a rough build of the Rocketeer helmet/rocket pack for my boyfriend
3. Ame-Comi Duela Dent or Harley Quinn
Stuff that I'm always updating:
1. Our Dorothy and Scarecrow. I'm trying to make the ultimate, screen-accurate Dorothy, at the moment. Trying to find decent 1930's French heels to mod.
2. Make a new Link costume/shield. Hopefully will make a brand new, much better looking Link shield, with pink/blue foam!
3. Make better, more accurate Bayonetta guns.
1. TRON Siren and Disc Wars Program
2. Sarah and Jareth from 'Labyrinth'
3. Jessica 6 from 'Logan's Run'...the Sandman is already complete: http://www.therpf.com/f24/logans-run-sandman-costume-mannequin-75425/index3.html
Stuff I'd LOVE to complete this year, but $10 says, I won't be able to -_-:
1. Rogue and Gambit, circa 90's X-Men cartoon
2. Start a rough build of the Rocketeer helmet/rocket pack for my boyfriend
3. Ame-Comi Duela Dent or Harley Quinn
Stuff that I'm always updating:
1. Our Dorothy and Scarecrow. I'm trying to make the ultimate, screen-accurate Dorothy, at the moment. Trying to find decent 1930's French heels to mod.
2. Make a new Link costume/shield. Hopefully will make a brand new, much better looking Link shield, with pink/blue foam!
3. Make better, more accurate Bayonetta guns.
RebellionBarbie
Active Member
Tsuyosa, I can't even see how that can be improved. Your Link is so perfect, and you pull it off perfectly!
This year I'm working on Babydoll from SuckerPunch, and a handful of others including continuing to try to get my Chiana from Farscape costume made. It's going slow.
617villen: I saw "android from THX" and thought "hey wait, I know someone who is doing one of those..." then realized your handle was "villen." Hi Andy.
This year I'm working on Babydoll from SuckerPunch, and a handful of others including continuing to try to get my Chiana from Farscape costume made. It's going slow.
617villen: I saw "android from THX" and thought "hey wait, I know someone who is doing one of those..." then realized your handle was "villen." Hi Andy.
