War machine 1st attempt
- Thread starter Don Juan
- Start date
Don Juan
Well-Known Member
Re: War machine 1st attempt...
Ill figure something out...but on the bright side i found some more supies at harbor freight...better deal than walmart and 99 centz store..36 brushes for 10 bucks.. I paid 10 bucks for 15 or 89 cents each anywhere else...and also found some rare earth magnets for 1.89..is that cheap? Well i thought it wad so i bought 3 packs of ten....well I'm off tomorrow and Tuesday hopefully i Get some work done..
tonykch
Well-Known Member
Re: War machine 1st attempt...
I bought some of those at Harbor Freight today too! I got the 1" ones for $7.99, plus I had a 20% off coupon. Much better than the $12 a box I was finding them for online.
Ill figure something out...but on the bright side i found some more supies at harbor freight...better deal than walmart and 99 centz store..36 brushes for 10 bucks.. I paid 10 bucks for 15 or 89 cents each anywhere else...and also found some rare earth magnets for 1.89..is that cheap? Well i thought it wad so i bought 3 packs of ten....well I'm off tomorrow and Tuesday hopefully i Get some work done..
I bought some of those at Harbor Freight today too! I got the 1" ones for $7.99, plus I had a 20% off coupon. Much better than the $12 a box I was finding them for online.
Don Juan
Well-Known Member
Re: War machine 1st attempt...
Yes the 1 inch are cheaper..i forgot my 20% coupon :facepalm
Don Juan
Well-Known Member
Re: War machine 1st attempt...
Well not much fiber glassing went on it was more thinking..i got some ideas finally put some to use hers on after seeing lots of pictures i noticed the shoulders pod that's on to is kinda squared..in The pictures it looks longer and angled so i tried it. Heres how it looked ...its not that great o or sraight but d will get fixed later..
Here's hire i want to put the mini gun it will have something like this...not sure exactly but its a start...
Well not much fiber glassing went on it was more thinking..i got some ideas finally put some to use hers on after seeing lots of pictures i noticed the shoulders pod that's on to is kinda squared..in The pictures it looks longer and angled so i tried it. Heres how it looked ...its not that great o or sraight but d will get fixed later..
Here's hire i want to put the mini gun it will have something like this...not sure exactly but its a start...
leviathan8609
Member
Re: War machine 1st attempt...
Looks great!
Looks great!
Don Juan
Well-Known Member
Re: War machine 1st attempt...
So i made a little progress..i put some foil so the and won't stick together and they will fit when they go together...i think is a good idea so it won't warp then it will be hard to match them together...you can see Some pictures with them extended..they are not cleaned or prepped yet i still need to modify them and cut the extra fiber glass....
On here you can see that it warped so i will be cutting this part off then replacing it...other stuff is not that bad..i will double check later..
Here I'm going to resin this part again..but i will be making a little xperiment..I'm going to harden it then try to build the other weapons..of i like then i willcut that piece out..just a thought..
That's my son...he moved in with me from Cali...so well be working on it together...
Ps..don't mind the mess..lol
So i made a little progress..i put some foil so the and won't stick together and they will fit when they go together...i think is a good idea so it won't warp then it will be hard to match them together...you can see Some pictures with them extended..they are not cleaned or prepped yet i still need to modify them and cut the extra fiber glass....
On here you can see that it warped so i will be cutting this part off then replacing it...other stuff is not that bad..i will double check later..
Here I'm going to resin this part again..but i will be making a little xperiment..I'm going to harden it then try to build the other weapons..of i like then i willcut that piece out..just a thought..
That's my son...he moved in with me from Cali...so well be working on it together...
Ps..don't mind the mess..lol
Last edited:
Don Juan
Well-Known Member
Re: War machine 1st attempt...
Lol....i printed like so many things last night...I'm surprised i still have ink....
Lol....i printed like so many things last night...I'm surprised i still have ink....
Don Juan
Well-Known Member
Re: War machine 1st attempt...
Thanks I'm trying to get it done by Halloween but i doubt it....:cry
Thanks I'm trying to get it done by Halloween but i doubt it....:cry
Don Juan
Well-Known Member
Re: War machine 1st attempt...
Well last night i printed out lots of stuff..some double of some things..I'm xperimenting again...well one thing i reprinted was my neck..i know purple say you can't see it much but i think you can.i made my neck to slightly bigger than my neck the first one i made was huge its just right now..well im going to make it functional..or movable so here's what I did so far..i printed the neck them printed the tabs or spaces between the layers which holds one piece to the other.for those who don't know is the two big circles...lol.well you put them together and cut the tabs off on side its hard to explain but it helps as a stop when you raise up the neck..hers a some pictures to show you...sorry I'm making things confusing
...
Here it is put together like almost lowered all the way...
Here it is put together in the raise position..with no tape or glue..it shouldn't fit to tight so when i add resin..i will trim it down..by the way i will be using some white cotton from like a shirt instead of fiber glass...its hard but slightly more flexible..from my experimented that i made it best for that job.....well more updates later..
Well last night i printed out lots of stuff..some double of some things..I'm xperimenting again...well one thing i reprinted was my neck..i know purple say you can't see it much but i think you can.i made my neck to slightly bigger than my neck the first one i made was huge its just right now..well im going to make it functional..or movable so here's what I did so far..i printed the neck them printed the tabs or spaces between the layers which holds one piece to the other.for those who don't know is the two big circles...lol.well you put them together and cut the tabs off on side its hard to explain but it helps as a stop when you raise up the neck..hers a some pictures to show you...sorry I'm making things confusing
Here it is put together like almost lowered all the way...
Here it is put together in the raise position..with no tape or glue..it shouldn't fit to tight so when i add resin..i will trim it down..by the way i will be using some white cotton from like a shirt instead of fiber glass...its hard but slightly more flexible..from my experimented that i made it best for that job.....well more updates later..
Don Juan
Well-Known Member
Re: War machine 1st attempt...
Cool..i didn't know that..thanks..
You can use napkings too , i do it for small pieces like the fingers, soak them in fiberglass for a lil bit strenght
Cool..i didn't know that..thanks..
Similar threads
