Tri-Laser Aiming Module Wip

[dfmurcia]

Hello everybody,

I'm working on an already built tri-laser module, it should be able to be installed on the most of the bio-helmets.

As far, I have set the three laser modules on the resine base, the lasers are align with an aiming error of 0.07inch every 7,1yards (2mm. every 6,5m).

I would really appreciate every feedback about the align error of the laser dots and wanted to ask if you think, it's too much comparing it with other prop-builders or DIY aiming modules mounted on custom masks around here.

Thanks
Diego

P.S.: I'll be posting some pics of the work ASAP.

 

[dfmurcia]

UPDATE: I aligned sucessfully the three laser dots with a very minimal error, around less than 1mm. every 10 meters (0,03 inches every 11 yards), now I'm about add a primer layer so it can be easily painted acording the helmet.

 

[XilianX2010]

This sounds cool! I don't unfer stand tech but are you trying to make it so the tris move by themselves? It sounds awesome!

 

[dfmurcia]

This sounds cool! I don't unfer stand tech but are you trying to make it so the tris move by themselves? It sounds awesome!

Not exactly, I'm making the laser holder for the mask to avoid to align every single laser module, I mean, they are already built and you only need to paste it to the helmet, the electrical system is also already mounted and the look of the module is like the real part of the helmet, not just the three modules.

 

[dfmurcia]

This it he look of the sign on a distance of around 7-8 meter, the dots are non or very, very minimal misaligned.

 

[dfmurcia]

[sharedmedia=gallery:images:5044]
[sharedmedia=gallery:images:5043]
[sharedmedia=gallery:images:5042]
[sharedmedia=gallery:images:5048]
[sharedmedia=gallery:images:5047]
[sharedmedia=gallery:images:5045]
[sharedmedia=gallery:images:5046]