DrunkenMynock
Active Member
Greetings all. I just finished my Shae Vizla "Exalted" Mandalorian Bounty Hunter helmet from SWTOR. This lid appears in two trailers and is also an equipable item in game, part of the "Exalted" armour set. The step-by-step production of this helmet is documented on my website, What's New | MYNOCK'S DEN,
I am offering this helmet in a limited second run of 10 units. The helmet will come as a raw, untrimmed cast, with the ear antenna and mics being cast separately.
Because I think white resin looks terrible, especially when your gear gets scuffed during wear, the helmet will be cast in resin pigmented grey, or black . The innermost layer will be done in ONYX black.
The ear stalk itself will be an actual 3D printed part, done in ABS plastic for strength. The helmet mold is one piece, so very minimal cleanup/touchup will be needed. Since this helmet appears in a variety of colour schemes in game, I'm assuming each person will want to do their own thing with it. So, the visor will not be included. (If you want a very simple, cost effective visor solution, you can get a green welder's face shield from ebay for $5).
Opening at the base of the helmet is 18cm from side to side and, and 23 cm from front to back. I have a large skull, and it fits me quite well.
Each helmet will be $200 USD, plus shipping from Canada Shipping is $28 to Canada, $46 to US; overseas shipping is possible but is quite expensive, with surface shipping to most places ranging from $96-125. PM for quote.
I will not collect money until each helmet is cast and ready to ship. The interest list is just that, interest, and you will not be locked in. One your helmet is cast, I will contact you via PM. If you are unable to pay, the helmet will be offered to the next person on the list.
Payment would be via PayPal, or EMT (if you're in Canada).
If you want a stand like the one in my photos, I can make you one as well for $35. The base is made of the same resin as the helmet; the stalk is 12" tall, made of metal with a wooden cap. Stand will come unpainted and unassembled. If you want to see how the stand was made, have a look here.
If you are interested, please send me a PM and I will add your name to the list!
=============================================================
1) grumreaper723 (em) - PM sent
2) ThrakenSal - paid - helmet shipping
3) C1RCA - paid - helmet shipped
4) Morgue - PM sent
5) gledar - helmet shipped
6) darthmac - helmet shipped
7) (undisclosed) - helmet shipped
8) PanzerKraken - pm sent.
9) Raf1oz - PM sent
10) KolHokan
I am offering this helmet in a limited second run of 10 units. The helmet will come as a raw, untrimmed cast, with the ear antenna and mics being cast separately.
Because I think white resin looks terrible, especially when your gear gets scuffed during wear, the helmet will be cast in resin pigmented grey, or black . The innermost layer will be done in ONYX black.
The ear stalk itself will be an actual 3D printed part, done in ABS plastic for strength. The helmet mold is one piece, so very minimal cleanup/touchup will be needed. Since this helmet appears in a variety of colour schemes in game, I'm assuming each person will want to do their own thing with it. So, the visor will not be included. (If you want a very simple, cost effective visor solution, you can get a green welder's face shield from ebay for $5).
Opening at the base of the helmet is 18cm from side to side and, and 23 cm from front to back. I have a large skull, and it fits me quite well.
Each helmet will be $200 USD, plus shipping from Canada Shipping is $28 to Canada, $46 to US; overseas shipping is possible but is quite expensive, with surface shipping to most places ranging from $96-125. PM for quote.
I will not collect money until each helmet is cast and ready to ship. The interest list is just that, interest, and you will not be locked in. One your helmet is cast, I will contact you via PM. If you are unable to pay, the helmet will be offered to the next person on the list.
Payment would be via PayPal, or EMT (if you're in Canada).
If you want a stand like the one in my photos, I can make you one as well for $35. The base is made of the same resin as the helmet; the stalk is 12" tall, made of metal with a wooden cap. Stand will come unpainted and unassembled. If you want to see how the stand was made, have a look here.
If you are interested, please send me a PM and I will add your name to the list!
=============================================================
1) grumreaper723 (em) - PM sent
2) ThrakenSal - paid - helmet shipping
3) C1RCA - paid - helmet shipped
4) Morgue - PM sent
5) gledar - helmet shipped
6) darthmac - helmet shipped
7) (undisclosed) - helmet shipped
8) PanzerKraken - pm sent.
9) Raf1oz - PM sent
10) KolHokan
Attachments
-
20140407_152244_med-3.jpg -
20140407_152244_med-3.jpg -
20140407_152244_med-3.jpg -
20140407_152305_med-2.jpg -
20140407_152305_med-2.jpg -
20140407_152305_med-2.jpg -
20140402_112748_med.jpg -
20140402_112748_med.jpg -
20140402_112748_med.jpg -
20140402_112224_med.jpg -
20140402_112224_med.jpg -
20140402_112224_med.jpg -
20140402_113032_med.jpg -
20140402_113032_med.jpg -
20140402_113032_med.jpg -
20140318_212158_med.jpg -
20140318_212158_med.jpg -
20140318_212158_med.jpg
Last edited by a moderator:
Chance at a finished one like the one in your pics?
