Unlimited Run Sound modules for props and costumes $49.99 +s

replicaprops

Official Licensee
RPF PREMIUM MEMBER
Just in time for Halloween. Add sound to your props and costumes.

Lots of information on my website including demo videos and links to all the parts you might need.

Click this link to order the $49.99 module which can play up to 10 sound banks with their own switches. Memory storage of about 2 min of total audio
http://www.replicaprops.com/Sound-board-for-props-and-costumes-model-1M_p_15.html

Click this link to order the $59.99 module which can play up to 10 sound banks with their own switches. Memory storage of about 6 min of total audio
http://www.replicaprops.com/Sound-board-for-props-and-costumes-model-4M_p_64.html

Click this link to see video examples
http://www.replicaprops.com/Sound-Board-video-examples_ep_43.html

This sound module has been used in hundreds of projects.
here are some video examples.
 
Last edited by a moderator:
Listen you only have a few more days till halloween, and sound is much more important than anything else you are doing to your costume. Trust me when I say that when you show up in an Iron man costume and there are repulsor sounds, or your Vader actually says a real recorded phrase from the movie, people will be much more impressed than just looking at it.
So get your butt in gear and order your sound module now before it's too late.

That was my hard sell technique.
Bump
 
does this have light controls on sound?
The sound module is sound only control. However there are multiple ways to control light at the same time that a sound is triggered. If you use dual pole switches you can control the on off of lights at the same time the sound plays. You can also use a dual pole switch to trigger a logic board.
 
I’d like to make an electrical shock sound for my deathstroke bo staff. I was wondering if you knew of any speakers that are loud enough but small enough to fit inside an 1.25" aluminum pole? I’ve bought your chips before and they are great. I’ll probably buy another if I know I can find a speaker that will be loud enough and fit in the pole.
 
I’d like to make an electrical shock sound for my deathstroke bo staff. I was wondering if you knew of any speakers that are loud enough but small enough to fit inside an 1.25" aluminum pole? I’ve bought your chips before and they are great. I’ll probably buy another if I know I can find a speaker that will be loud enough and fit in the pole.
Have you ever taken a look at digikey? They have soooooo many speakers to choose from. http://www.digikey.com/product-search/en/audio-products/speakers/720966

Also, I have been looking at doing something for a project that also has small space but needs loud sound, and I was told the apple Iphone 5 replacement speakers are very good, but I have not tested them out yet.
 
how big are your sound modules and coil? I'M asking cause i'm looking to add sound to my spider-man web shooters, but it need to be small enough to fit somewhere in this skin thight suit!!!
 
how big are your sound modules and coil? I'M asking cause i'm looking to add sound to my spider-man web shooters, but it need to be small enough to fit somewhere in this skin thight suit!!!
1.4" long x 0.75" wide x 0.30" thick (0.40" thick before solder stems are snipped)​
 
Last edited by a moderator:
If i wanted say 5 sound bites/sayings for my Buzz Lightyear suit how much would that cost?

Sent from my GT-I9505 using Tapatalk now Free
 
Ok cool. And is it one switch that toggles through each saying or can you add several switches for each sound/saying

Sent from my GT-I9505 using Tapatalk now Free
 
Ok cool. And is it one switch that toggles through each saying or can you add several switches for each sound/saying

Sent from my GT-I9505 using Tapatalk now Free
You can have between 1 and 10. If you have more than 10 sounds though, then you would go with a single switch that toggles through all of them. If you have 10 or less sounds, then you can have a switch for each sound and play them on demand.
 
Back
Top