This run is for a Relby K-23 acrylic display stand. This stand was somewhat tricky to find good spots for the support arms, mainly due to the handle and the blaster itself being so top heavy. The stand will be offered in all clear or with a black base. All edges are sanded smooth so there's no cutting lines. Also the top corners of the display support arms are rounded so they won't potentially scuff your prop. We also line the top of the support arms with grey felt so your blaster won't be resting on a rigid surface. If you don't care for the felt lined tops we can leave them bare. The blaster sits about 1/4 inch above the surface of the display base also to protect it from resting on a hard surface. The front support arm is positioned just in front of the rear barrel gear to prevent your blaster from sliding forward and possibly falling off the stand.
Please specify if you want a clear base or black. Felt or no felt on the support arms. Thank you so much!
The cost of the stand is $40 plus shipping.
Please specify if you want a clear base or black. Felt or no felt on the support arms. Thank you so much!
The cost of the stand is $40 plus shipping.
Last edited:
