gammax
New Member
Well Since I couldn't find Phasma's Baton I made one. I chose to do the collapsed version, its still a work in progress. But it should Be a screen accurate as you can get without casting the OG prop. Its 24.5 in in total length and a 3/4 in dia. If you find this is wrong, If you have better info please let me know So I can correct it. Happy printing.
https://www.thingiverse.com/thing:2829420
Updated the Baton it now 4 parts and will fit most printers, YAY. Have fun!
Also I just finished screen accurate 3d modeling of the baton. Here is what I figured out so far. The collapsed version should be about 2 foot in length and 3/4 inch in diameter. It should have 3 cut outs of varying length that should be 1/2 in width. Inner cut 4 in, Middle cut 1 in, and outer 3/4 in. 1in between the inner cuts, 1/4 in between the inner and middle cuts, and 1/2 in between the middle and outer cuts. The taper for the point starts at the end of the last cut out. Which should be about 5 in long. It looks like the extended version keep the same length of cut out and space and the taper is the same length. If wanted to make it out of something besides 3d print.
Here is one half for demo:
[_.5"_( 4" ).25"( 1" )_.5"_(.75") ______5"_____>
https://www.thingiverse.com/thing:2829420
Updated the Baton it now 4 parts and will fit most printers, YAY. Have fun!
Also I just finished screen accurate 3d modeling of the baton. Here is what I figured out so far. The collapsed version should be about 2 foot in length and 3/4 inch in diameter. It should have 3 cut outs of varying length that should be 1/2 in width. Inner cut 4 in, Middle cut 1 in, and outer 3/4 in. 1in between the inner cuts, 1/4 in between the inner and middle cuts, and 1/2 in between the middle and outer cuts. The taper for the point starts at the end of the last cut out. Which should be about 5 in long. It looks like the extended version keep the same length of cut out and space and the taper is the same length. If wanted to make it out of something besides 3d print.
Here is one half for demo:
[_.5"_( 4" ).25"( 1" )_.5"_(.75") ______5"_____>
Last edited by a moderator: