AjiPro
Sr Member
https://youtu.be/Yu6w7S3GKiY So... What do we call this? V3.2 PL? Or do we go to V4?
https://youtu.be/Yu6w7S3GKiY So... What do we call this? V3.2 PL? Or do we go to V4?
https://youtu.be/Yu6w7S3GKiY So... What do we call this? V3.2 PL? Or do we go to V4?
Interesting that they moved that lights button to be on the same side as the close/open buttons.
I'll still pass on these for now. I don't think they will be wearable.
The official 2016 Mag has the buttons for lights & tighten/loosen all on the same side, so I guess they’re just keeping them as accurate as possible.
The official 2016 Mag has the buttons for lights & tighten/loosen all on the same side, so I guess they’re just keeping them as accurate as possible. Also eliminates the need for multiple wiring routes.
Agreed, the power-lace feature is only cool if you intend to wear these & they’re likely to fail after a couple of wears if the v3 is anything to go by.
Also, while they are ‘Mags’, if Nike is knocking out HyperAdapts for £620/$720 which is already a pi$$-take, at least there’s a warranty in place. There’s no way I’m shelling out $1500 for counterfeit shoes, not to mention as @Jedifyfe quite rightly pointed out, screw these being seized by customs, can’t see ‘David’ replacing them in a hurry & you know that beautiful box is going to arrive pretty much flat-packed with a broken acrylic stand inside.
Definitely not for me but good luck to anyone that takes the plunge.
Yeah I know that feeling. Probably best though with Christmas and stuff coming up
Was just curious if you were going to attempt the strap delamination or just cut the back out to fit the strap logo. If I had to do another pair, I'd just cut the back out. That glue they used is just seriously crazy stuff. Thank the gods the soles are not glued on using that.
Exactly. It is all over if you cut the fabric.Thanks for the tip. I'll test cutting in through the back with some other similar material I have to see how that goes. If not, carefully running a new snap-knife blade inside the join over and over and over will separate the two pieces, though it may take some time. If the blade is sharp enough, it cuts through the glue, but if it's that sharp, you also want to take your time and not press hard, and slip. Blood would be hard to get out of MAGs material, I expect.
Yeah I know that feeling. Probably best though with Christmas and stuff coming up
Was just curious if you were going to attempt the strap delamination or just cut the back out to fit the strap logo. If I had to do another pair, I'd just cut the back out. That glue they used is just seriously crazy stuff. Thank the gods the soles are not glued on using that.