NIKE, you can go to hell. I'm making my own NIKE MAG's *NEW LED's* 12-21 pg.21

Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *EL SOLES* 11-16 Pg. 1

This is sooooo cool!! Must quit veiwing and get back to work!!
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *EL SOLES* 11-16 Pg. 1

Thanks Hotshot! I am just waiting for the top white leather part to be finished. It is turning out to be a hard thing to replicate accurately.
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *EL SOLES* 11-16 Pg. 1

I decided to go ahead and do the other soles today.

Dsc03687.jpg

Dsc03689.jpg

Dsc03690.jpg

Dsc03691.jpg

Dsc03692.jpg
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's * 2 EL SOLES* 12-2

Is there even any point in me saying how good these look? ;-) thought about just recovering Marks shoe so that it will still to wearable Brad? Bit like what S02 is now doing but with a more accurate material and toe reshaping. It would be easier to do and will be very popular :)
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's * 2 EL SOLES* 12-2

Is there even any point in me saying how good these look? ;-) thought about just recovering Marks shoe so that it will still to wearable Brad? Bit like what S02 is now doing but with a more accurate material and toe reshaping. It would be easier to do and will be very popular :)

Thanks Luke! I might try a pair but I would just have to figure it out in my head before I took that plunge.
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's * 2 EL SOLES* 12-2

Thanks Luke! I might try a pair but I would just have to figure it out in my head before I took that plunge.

Well, feel free to use me as a test dummy as I have ordered the darker silver matte fabric and will start work early next week. I was thinking of glueing the fabric over the top, but I think I will have to stitch it to do it properly and make a good job of it.
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's * 2 EL SOLES* 12-2

They have made their way to eBay now. Apparently the design was leaked from Pou Chen in China and people are making replicas. I think what's more likely is that people have clearly copied Marks shoes and are trying to promote these a bit ;-) the toe section and sole are identical to Marks, I think what's happened is Marks shoe designer has handed his research over for a fee for a nice retirement ;-)

Back to the future shoes mag 2011 | eBay
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's * 2 EL SOLES* 12-2

I finally got one side of Ankle Lights done. These things are SO bright that the GREEN color get's muted out in photos. These are CRAZY bright!

Check it out!




Dsc03715.jpg

Dsc03714.jpg

Dsc03717.jpg

Dsc03718.jpg

Dsc03729.jpg

Dsc03732.jpg

Dsc03733.jpg

Dsc03756.jpg
 
Last edited:
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

awsome display. man i am so jealous because of your progress. I just don't have time for the project right now. Your mags are looking awsome when you will complete them with the white leather part they will be the best selfmade mags on the net ( until mine are comming ;))
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

Hi guys¡¡¡,
I joined to the Mags making¡¡¡ im from Spain and I started my own project to build as exactly as possible my Mags.(sorry for my bad english¡¡):lol

the first problem that I see on ALL previous post was the sole¡¡¡¡.
I spend a month in modelling a complete sole with the lower transparent rubber that match exactly with the original prop of the movie .All the pieces match exactly, with 3D printing I can obtain the most detailed sole of my mags.:love
I started with the back "white piece" .
I modeled that piece by hand(with SuperSculpey) because its simmetrical in two shoes and its easy. I prepared a pair of holes for the button cell batteries to feed the LED lights an the EL tape(see photoshopped image).
I almost finished the mold casting. for the rubber material I use white silicone rubber(rhodorsil silicones...expensive..) its like EVA,but its better¡¡ (about SHORE 30A hardness:)).
Its a LOT of work but... its more pleasant¡¡¡ thank guys¡¡¡

http://www.flickr.com/photos/71460496@N08/6453831241

http://www.flickr.com/photos/71460496@N08/6453831241

IMG_1047 | Flickr - Photo Sharing!

rendermag7 | Flickr - Photo Sharing!

IMG_1074 | Flickr - Photo Sharing!

IMG_1093 | Flickr - Photo Sharing!

6453831241

photostream

photostream

photostream

photostream

photostream

photostream
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

I still check this thread every day. The progress is looking great. Can't wait to see the upper white part.
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

Yup, definately on my watch list :thumbsup Would be cool to see a vid of how the wiring is done with the EL and LEDs and how the button works etc.

I've updated my thead btw Brad, think you may like..
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

Hi guys¡¡¡,
I joined to the Mags making¡¡¡ im from Spain and I started my own project to build as exactly as possible my Mags.(sorry for my bad english¡¡):lol

the first problem that I see on ALL previous post was the sole¡¡¡¡.
I spend a month in modelling a complete sole with the lower transparent rubber that match exactly with the original prop of the movie .All the pieces match exactly, with 3D printing I can obtain the most detailed sole of my mags.:love
I started with the back "white piece" .
I modeled that piece by hand(with SuperSculpey) because its simmetrical in two shoes and its easy. I prepared a pair of holes for the button cell batteries to feed the LED lights an the EL tape(see photoshopped image).
I almost finished the mold casting. for the rubber material I use white silicone rubber(rhodorsil silicones...expensive..) its like EVA,but its better¡¡ (about SHORE 30A hardness:)).
Its a LOT of work but... its more pleasant¡¡¡ thank guys¡¡¡



IMG_1017 | Flickr - Photo Sharing!

IMG_1047 | Flickr - Photo Sharing!

rendermag7 | Flickr - Photo Sharing!

IMG_1074 | Flickr - Photo Sharing!

IMG_1093 | Flickr - Photo Sharing!

6453831241

photostream

photostream

photostream

photostream

photostream

photostream


Impressive!
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

Hi guys¡¡¡,
I joined to the Mags making¡¡¡ im from Spain and I started my own project to build as exactly as possible my Mags.(sorry for my bad english¡¡):lol

Welcome and I look forward to your progress!
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

This thread is a great response to that elitist NIKE marketing move.

Great work!
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

i was wondering if anyone would tackle a custom sole , now theres scope for differant sizes etc

good work guys
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

This thread is a great response to that elitist NIKE marketing move.

Great work!

Thank you.

I hope to have these finished by March.

Tonight I reworked the ankle bubble and made it deeper/taller. Now the LED's fit snug inside it. YAY!
 
Re: NIKE, you can go to hell. I'm making my own NIKE MAG's *ANKLE LIGHTS* 12-3 P

Hi guys¡¡¡,
I joined to the Mags making¡¡¡ im from Spain and I started my own project to build as exactly as possible my Mags.(sorry for my bad english¡¡):lol

the first problem that I see on ALL previous post was the sole¡¡¡¡.
I spend a month in modelling a complete sole with the lower transparent rubber that match exactly with the original prop of the movie .All the pieces match exactly, with 3D printing I can obtain the most detailed sole of my mags.:love
I started with the back "white piece" .
I modeled that piece by hand(with SuperSculpey) because its simmetrical in two shoes and its easy. I prepared a pair of holes for the button cell batteries to feed the LED lights an the EL tape(see photoshopped image).
I almost finished the mold casting. for the rubber material I use white silicone rubber(rhodorsil silicones...expensive..) its like EVA,but its better¡¡ (about SHORE 30A hardness:)).
Its a LOT of work but... its more pleasant¡¡¡ thank guys¡¡¡



IMG_1017 | Flickr - Photo Sharing!

IMG_1047 | Flickr - Photo Sharing!

rendermag7 | Flickr - Photo Sharing!

IMG_1074 | Flickr - Photo Sharing!

IMG_1093 | Flickr - Photo Sharing!

6453831241

photostream

photostream

photostream

photostream

photostream

photostream

really impressive. You could 3D Print the shoe an make a form out oft it to build it with latex ore urethan. Looks very nice. Is your plan to make them wearable? And now the important question. Is the form strong enough to do some more parts, for perhaps some other mag builders around here ;) :D don`t mind about your english mine isn't even better ;)
 
Back
Top