Nike MAG replicas (V2 and V3 only)

Thanks Niixxin, I did recieve a message early this morning that the ags have been shipped. Looking forward to seeing your prototypes!

My 9.5's were still at 'Shipment Required' this morning. Aliexpress is undergoing maintenance right now so I can't check but as long as they arrive by the end of the month I'll be fine. My birthday is the 26th and I have a concert on the 30th, so the Mags will see some heavy use during their debut.

I put a few pics of my design in an album on my profile. Just some I had on my phone as the rest are on another hard drive. One pic of the crude prototype, a lat/med sketch, and a photoshop sketch of the prototype.
 
ye ive talked to wirecraft and coinsize inverters shwld come this week thats what he said few days ago but battery wont last long if i can hide it well theres one on ebay that uses 1 x aaa battery which should be perfect and only around£6 i think
 
Hey, got mine last week! Love them...

BUT... Problem with my left Mag... seems the switch won't power on the lights anymore. They work while charging, but I can't get them to turn off. THEN earlier tonight, out of nowhere while walking, they turned on and now I can't turn them off... Any suggestions?

Thanks
 
Hey, got mine last week! Love them...

BUT... Problem with my left Mag... seems the switch won't power on the lights anymore. They work while charging, but I can't get them to turn off. THEN earlier tonight, out of nowhere while walking, they turned on and now I can't turn them off... Any suggestions?

Thanks

Peel the heel cup back, and check the soldering connections.
 
Just opened them up last night. I'm very impressed with the shoes. Yes, they would be better with a light up logo and the toe box fix, but that is about it. They are better replica Mags than I could have ever dreamed of owning a couple years ago.

I usually wear a 10.5 and ordered the 9.5. I am glad I didn't go any smaller. These fit, but they are very snug. That is probably what you want though since they don't have laces to tighten them up. For anyone else ordering I would recommend either a full size or half size small as well. Either would be fine for wearing I would think. These shoes are better tight than loose as you can't really tighten them to your feet.

Shoes from my seller were listed at $235, but offered 10 bucks off on your first order and another 5 if you use a Mastercard. So if you use a Mastercard they are $220 shipped. He has a discount if you buy 2 pairs as well that would take them down closer to like $211 a pair shipped. They arrived at my house 6 days after placing the order - which seems amazing to me.
 
Looks like the spree of the overpriced V2s on ebay has mostly stopped. Only one pair is up for auction right now. Not going for too much either. $260. What I found the most ridiculous about this is that a couple people were selling links to sites where you could buy them. Who would be that stupid to buy a website link you could Google for free?
 
Just opened them up last night. I'm very impressed with the shoes. Yes, they would be better with a light up logo and the toe box fix, but that is about it. They are better replica Mags than I could have ever dreamed of owning a couple years ago.

I usually wear a 10.5 and ordered the 9.5. I am glad I didn't go any smaller. These fit, but they are very snug. That is probably what you want though since they don't have laces to tighten them up. For anyone else ordering I would recommend either a full size or half size small as well. Either would be fine for wearing I would think. These shoes are better tight than loose as you can't really tighten them to your feet.

Shoes from my seller were listed at $235, but offered 10 bucks off on your first order and another 5 if you use a Mastercard. So if you use a Mastercard they are $220 shipped. He has a discount if you buy 2 pairs as well that would take them down closer to like $211 a pair shipped. They arrived at my house 6 days after placing the order - which seems amazing to me.

So going one size down to what you would normally wear is just about perfect?
 
They're pretty much exactly the same height as they are in length!

I really am keen to know this as all the scaling I have done seems to come to a 1.1:1 length to height ratio. If that is the case, then a size US10 (the size I would wear seem to be about 300mm) should be about 273mm and there are photos of an 11 V2 at just on 250mm tall. That is almost an inch!
 
I really am keen to know this as all the scaling I have done seems to come to a 1.1:1 length to height ratio. If that is the case, then a size US10 (the size I would wear seem to be about 300mm) should be about 273mm and there are photos of an 11 V2 at just on 250mm tall. That is almost an inch!

Give me 15 & I'll take some new photos & post exact measurements for you! Back shortly! :thumbsup
 
I really am keen to know this as all the scaling I have done seems to come to a 1.1:1 length to height ratio. If that is the case, then a size US10 (the size I would wear seem to be about 300mm) should be about 273mm and there are photos of an 11 V2 at just on 250mm tall. That is almost an inch!

the v2s are about an inch shorter in height so i guess theres not much we can do to increase it unfortunately.
 
I really am keen to know this as all the scaling I have done seems to come to a 1.1:1 length to height ratio. If that is the case, then a size US10 (the size I would wear seem to be about 300mm) should be about 273mm and there are photos of an 11 V2 at just on 250mm tall. That is almost an inch!

Okay, I've got some exact measurements for you & clearly I was talking cr@p before. These are for a US 8 size. The length at the longest point excluding heel cup is 27.75cm & height at the longest point (bottom of sole to peak of white ankle padding) is 24.25cm.

I've attached quite a few photos that will hopefully be of help, they show quite closely the material used, shape of sole print, profile, etc.

On the photo of the laces you should be able to make out that the elastic is only stitched on one side & that the laces retract into the casing of the shoe itself.

The EL in the sole is obviously one piece however the blanking for the middle is white & the corners of the EL panels are cut rounded.

Let me know if there are any other photos you're after! :thumbsup
 

Attachments

  • IMG_7803.JPG
    IMG_7803.JPG
    1.3 MB · Views: 135
  • IMG_7797.JPG
    IMG_7797.JPG
    2.2 MB · Views: 152
A few more for you Cavx...

Also, I'm not sure if it's been discussed before but the tongue is made in 3 sections. A join underneath lace number 2 & one under lace number 4 if you take the first lace as being the one closest to the front of the shoe.
 

Attachments

  • IMG_7801.JPG
    IMG_7801.JPG
    2.5 MB · Views: 157
A few more for you Cavx...

Also, I'm not sure if it's been discussed before but the tongue is made in 3 sections. A join underneath lace number 2 & one under lace number 4 if you take the first lace as being the one closest to the front of the shoe.

Loving all the pics... :thumbsup
 
Looks like the spree of the overpriced V2s on ebay has mostly stopped. Only one pair is up for auction right now. Not going for too much either. $260. What I found the most ridiculous about this is that a couple people were selling links to sites where you could buy them. Who would be that stupid to buy a website link you could Google for free?

Not really. It comes in waves. There is a pair right now going for $810 and two other pair that just sold for $1485 and $1650.

Thi will be an ongoing thing.

I am thinking about putting my 9.5 conversions up and see how they do....
 
Not really. It comes in waves. There is a pair right now going for $810 and two other pair that just sold for $1485 and $1650.

Thi will be an ongoing thing.

I am thinking about putting my 9.5 conversions up and see how they do....

Think you'll get a small fortune for them & at least the winning bidder would be getting some awesome modifications to boot!
 
Back
Top