New BMF coming
- Thread starter Jimmer
- Start date
ThrakenSal
Well-Known Member
All I can say is "Dayum"!!!
Rebel(Hasbro) Falcon on HOTH ICE planet
This is a down and dirty 10min photo shoot as I could not see the LED(sun to bright) on the camera so I had no idea other then I THINK it in frame.
Minor clone tool PS use on the snow to get rid of the grass,10 min, again down and dirty.
View attachment 425994View attachment 425995View attachment 425996View attachment 425997View attachment 425998View attachment 425999
Q? can you spot some of my new decals?
Junk Pilot
Sr Member
Brilliant
I love seeing the Highway 1 decal over the cockpit too. Classic Falcon look.
I love seeing the Highway 1 decal over the cockpit too. Classic Falcon look.
Rebel(Hasbro) Falcon on HOTH ICE planet
This is a down and dirty 10min photo shoot as I could not see the LED(sun to bright) on the camera so I had no idea other then I THINK it in frame.
Minor clone tool PS use on the snow to get rid of the grass,10 min, again down and dirty.
View attachment 425994View attachment 425995View attachment 425996View attachment 425997View attachment 425998View attachment 425999
Q? can you spot some of my new decals?
Junk Pilot
Sr Member
That's one of 3 videos on the Build the Millennium Falcon website.
Not sure if this has been posted, it has some interesting close ups of the real 32"
http://youtu.be/vb63W0xlm28
tek2graphics
Sr Member
Beautiful work! :thumbsup
Not sure if this has been posted, it has some interesting close ups of the real 32"
http://youtu.be/vb63W0xlm28
Nice video!!!
Thanks for sharing!
Hey Space bob,....
SWEET VIDIO! Wasn't this the model that was on e bay some time ago? 6- 8 months?? To the tune of 12-15 grand??
I pulled all the close up shots and stuck them in a folded that I CAN"T SEEM TO FIND,.. gggggghhhhhh,... having terabytes of disk space is nice,.. but NOT when you can't find what you KNOW you have some place.
Thanks for posting it.
SWEET VIDIO! Wasn't this the model that was on e bay some time ago? 6- 8 months?? To the tune of 12-15 grand??
I pulled all the close up shots and stuck them in a folded that I CAN"T SEEM TO FIND,.. gggggghhhhhh,... having terabytes of disk space is nice,.. but NOT when you can't find what you KNOW you have some place.
Thanks for posting it.
Jaitea
Master Member
A word of warning though, don't use the DeAgostini images as a source of reference as there are inaccuracies
J
Ok I'm thinking of making this available if there is enough interest. I'm looking for input on ANY more decals that I missed and if any one knows what they ACTUALLY say.
I pulled my reference off of shots from the 5ft model off this board and around the web.
The ones I recreated are, I think the most promenent. Some of the smaller ones I have but did not print as they are to small to really even tell what they are when printed to scale.
Here are some reference shots as to what I'm talking about
and
This is a LOW res jpeg. These were re created in Illustrator, the fonts are not correct I did a close match from my font collection.
I know it's hard to see,.. I don't want you all to use them until there finalized,. You have spent a LOT of effort getting your Falcons to be KICK a55 sweet looking why ness it up with a low res decal,..
JUST say'n oh and these are not to scale. LOL I know I would down load them and test them out
WAIT. give me some input on making them better and which ones I might be missing that you think I should add.
I would do a couple of sets one for the Legacy and one for the Rebel. Well why not the MPC/AMT version? Thats what I started these for but it turns out you can only really use about 4-5 as they just get too small.
Let me know what you think.
Best regards
ps. A kot of them are repeted as they use the same decal in more than one spot on the 5ft version.
I pulled my reference off of shots from the 5ft model off this board and around the web.
The ones I recreated are, I think the most promenent. Some of the smaller ones I have but did not print as they are to small to really even tell what they are when printed to scale.
Here are some reference shots as to what I'm talking about
andThis is a LOW res jpeg. These were re created in Illustrator, the fonts are not correct I did a close match from my font collection.
I know it's hard to see,.. I don't want you all to use them until there finalized,. You have spent a LOT of effort getting your Falcons to be KICK a55 sweet looking why ness it up with a low res decal,..JUST say'n oh and these are not to scale. LOL I know I would down load them and test them out
WAIT. give me some input on making them better and which ones I might be missing that you think I should add.I would do a couple of sets one for the Legacy and one for the Rebel. Well why not the MPC/AMT version? Thats what I started these for but it turns out you can only really use about 4-5 as they just get too small.
Let me know what you think.
Best regards
ps. A kot of them are repeted as they use the same decal in more than one spot on the 5ft version.
Attachments
Last edited:
Ok I'm thinking of making this available if there is enough interest. I'm looking for input on ANY more decals that I missed and if any one knows what they ACTUALLY say.
I pulled my reference off of shots from the 5ft model off this board and around the web.
The ones I recreated are, I think the most promenent. Some of the smaller ones I have but did not print as they are to small to really even tell what they are when printed to scale.
Here are some reference shots as to what I'm talking aboutView attachment 426435andView attachment 426437
This is a LOW res jpeg. These were re created in Illustrator, the fonts are not correct I did a close match from my font collection.
View attachment 426445Yea I know it's hard to see,.. I don't want you all to use them until there finalized,. You have spent a LOT of effort getting your Falcons to be KICK a55 sweet looking why ness it up with a low res decal,..
JUST say'n oh and these are not to scale. LOL I know I would down load them and test them out WAIT. give me some input on making them better and which ones I might be missing that you think I should add.
I would do a couple of sets one for the Legacy and one for the Rebel. Well why not the MPC/AMT version? Thats what I started these for but it turns out you can only really use about 4-5 as they just get too small.
Let me know what you think.
Best regards
ps. A lot of them are repeted as they use the same decal in more than one spot on the 5ft version.
I pulled my reference off of shots from the 5ft model off this board and around the web.
The ones I recreated are, I think the most promenent. Some of the smaller ones I have but did not print as they are to small to really even tell what they are when printed to scale.
Here are some reference shots as to what I'm talking aboutView attachment 426435andView attachment 426437
This is a LOW res jpeg. These were re created in Illustrator, the fonts are not correct I did a close match from my font collection.
View attachment 426445Yea I know it's hard to see,.. I don't want you all to use them until there finalized,. You have spent a LOT of effort getting your Falcons to be KICK a55 sweet looking why ness it up with a low res decal,..
JUST say'n oh and these are not to scale. LOL I know I would down load them and test them out
WAIT. give me some input on making them better and which ones I might be missing that you think I should add.I would do a couple of sets one for the Legacy and one for the Rebel. Well why not the MPC/AMT version? Thats what I started these for but it turns out you can only really use about 4-5 as they just get too small.
Let me know what you think.
Best regards
ps. A lot of them are repeted as they use the same decal in more than one spot on the 5ft version.
Last edited:
Ok I'm thinking of making this available if there is enough interest. I'm looking for input on ANY more decals that I missed and if any one knows what they ACTUALLY say.
I pulled my reference off of shots from the 5ft model off this board and around the web.
The ones I recreated are, I think the most promenent. Some of the smaller ones I have but did not print as they are to small to really even tell what they are when printed to scale.
Here are some reference shots as to what I'm talking aboutView attachment 426435andView attachment 426437
This is a LOW res jpeg. These were re created in Illustrator, the fonts are not correct I did a close match from my font collection.
Yea I know it's hard to see,.. I don't want you all to use them until there finalized,. You have spent a LOT of effort getting your Falcons to be KICK a55 sweet looking why ness it up with a low res decal,..
JUST say'n oh and these are not to scale. LOL I know I would down load them and test them out WAIT. give me some input on making them better and which ones I might be missing that you think I should add.
I would do a couple of sets one for the Legacy and one for the Rebel. Well why not the MPC/AMT version? Thats what I started these for but it turns out you can only really use about 4-5 as they just get too small.
Let me know what you think.
Best regards
ps. A kot of them are repeted as they use the same decal in more than one spot on the 5ft version.
- - - Updated - - -
I know It seems to be the 32 mostly.
- - - Updated - - -
Computer wXKE D OUT. Same thing posted 3 times. Opps
I pulled my reference off of shots from the 5ft model off this board and around the web.
The ones I recreated are, I think the most promenent. Some of the smaller ones I have but did not print as they are to small to really even tell what they are when printed to scale.
Here are some reference shots as to what I'm talking aboutView attachment 426435andView attachment 426437
This is a LOW res jpeg. These were re created in Illustrator, the fonts are not correct I did a close match from my font collection.
Yea I know it's hard to see,.. I don't want you all to use them until there finalized,. You have spent a LOT of effort getting your Falcons to be KICK a55 sweet looking why ness it up with a low res decal,..
JUST say'n oh and these are not to scale. LOL I know I would down load them and test them out
WAIT. give me some input on making them better and which ones I might be missing that you think I should add.I would do a couple of sets one for the Legacy and one for the Rebel. Well why not the MPC/AMT version? Thats what I started these for but it turns out you can only really use about 4-5 as they just get too small.
Let me know what you think.
Best regards
ps. A kot of them are repeted as they use the same decal in more than one spot on the 5ft version.
- - - Updated - - -
I know It seems to be the 32 mostly.
- - - Updated - - -
Computer wXKE D OUT. Same thing posted 3 times. Opps
JPCOdessa70
Active Member
Hi Retiredadguy,
LOVE THE DECALS...If you get around doing the high res version I would love to get them for my MF.
Thanks for the work..
LOVE THE DECALS...If you get around doing the high res version I would love to get them for my MF.
Thanks for the work..
Last edited:
JPCOdessa70
Active Member
Hi Guys, Ok here I'm at, cutting the MF. Will be doing the interior details, had to be carefully plan so that the whole thing will still have rigidity when built.
Junk Pilot
Sr Member
That's what I'm talking about. The trapezoid part in the centre will make great caps to hide the mounting points. I can now hear my wife saying "Damn you, Tony."
I'd be very tempted to get a set. There's something appealing about having a Falcon that has the Highway 1 sign above the cockpit. I might have to keep the toy's original cone though because the more I make it look like the 32in ship the more out of place the decals will look.
I'd be very tempted to get a set. There's something appealing about having a Falcon that has the Highway 1 sign above the cockpit. I might have to keep the toy's original cone though because the more I make it look like the 32in ship the more out of place the decals will look.
Nice decals!
If you have the hi-res version, it's so easy to print them on a decal sheet through my laser color printer...
JPCOdessa70
Active Member
Hi Tony, Just a quick question, will the resin kit include all the parts you made for the Hasbro as listed in shapeway?
Hey.
Not all the parts. The cabin cockpit and cabin walls, the turret well and the docking ring plate will be only available through Shapeways, at 308 Bits.
The reason is for the tiny details and for the 300!!! pre drilled holes that have the cabin walls for fiber optics lighting. The turret well has 50 pre drilled holes on it.
