My tippmann X7c ALIENS Pulse Rifle paintball marker PIC HEAVY

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

magwell created the same way as the upper shroud

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

magazine version 1 completed...mag version 2 is smaller

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

after redoing some parts (triangular metal parts, the magazine, magazine magwell) primed, painted with some weathering and then heavily clear coated...and a final fit..time for things to go back together

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

viola...a 90% done X7c pulse rifle

cyclone ready and RT ready..still have to work in the airline

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

ammo counter mounted

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

testing magazine switch

magazine switch ..a trigger switch i took off and old piranha paintball gun

magazine switch test video
July 21, 2012 12:09 PM - YouTube

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

all that left is to work in the air line and reinstall internals and trigger switch for the ammo counter

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

trigger for the ammo counter from an old 98c board..this is version 1 which later failed

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

Polished the internals

Trigger for ammo counter VERSION 2...this version was later refined

Video for trigger switch
July 22, 2012 12:08 AM - YouTube

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

added metal "plastic" to hold the trigger in place

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

regular air thru at the top...my modded one at the bottom

brazed the copper tubing to a brass fitting for the q/d

Completed the incomplete X7 air thru kit with my own fittings..this was later revised in version 2 with the q/d brazed on to the end of the copper tube

Viola...custom made air thru kit for the Pulse Rifle

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

BT Ripclip added with an A5 flasc adapter modded to fit the X7c to replace Cyclone feed (minimize air usage)

 

[StormShadowz]

Re: My tippmann X7c ALIENS Pulse Rifle paintball marker

a few finishing touches to go but she's finally done..had a problem with the X7 "farting"..thought it might have been the air system but it turned out to be the end cap on the butt stock..it was too deep for the rear spring meaning not enough tension on the spring..add a spring and now its good to go

Heres a video of the counter counting down as well as the test firing of the "shotgun"
pulse rifle - YouTube

MODS are:

Tippmann X7C
Custom made m41a pulse rifle body and barrel shroud
Custom made M41a pulse rifle Magazine well and magazine
Opsgear MP5 sliding stock
LightBenders Ammo Counter with trigger/magazine/on/off switches
Polished internals
Cyclone feed
Response Trigger from an Tippmann A5 modded to fit (missing long coupler)
Incomplete X7 air thru kit with custom plumbing for remote line
Modded m203 under barrel grenade launcher with SPAS 12 shot gun parts
MadBull grenade shell
Lapco Big Shot 14" barrel
BT RipClip with modded A5 flasc adapter

Hope y'all have enjoyed the build pics..I started in late may i think and its been fun and a pain at the same time LOL..feel free to ask any questions