MY $15.00 STAR WARS BLASTER

ed-209

Sr Member
Hi Guys,
I ran across this DL-44 Dense Foam blaster on Amazon but unfortunately, they wouldn't mail it to me in New Jersey. However, I found it on AliExpress for half the price. It took about 3 weeks. It was heavily weathered, and the scope became detached during transit, but 2 drops of super glue fixed that problem.
I added a couple of screws, hollowed out the front of the barrel and added a washer.
I had to fabricate the scope mount and used two metal buttons to elevate it on the side.
I printed out a reticle for the rear sight and added a piece to hold the glass lens off a $1.25 flashlight.
Painted the gun, except for the grips, a semi-gloss then rubbed it all over with graphite powder then sealed it with a clear coat lacquer.
I used rub-n-buff on the flash hider.
I've labelled the work I did in the photos below.
Can't beat it for $15.00!!!

SW-ESB_Solo DL-44 Blaster-Rep (1).jpg
SW-ESB_Solo DL-44 Blaster-Rep (2).jpg
SW-ESB_Solo DL-44 Blaster-Rep (3).jpg
SW-ESB_Solo DL-44 Blaster-Rep (4).jpg
SW-ESB_Solo DL-44 Blaster-Rep (5).jpg
SW-ESB_Solo DL-44 Blaster-Rep (6).jpg
SW-ESB_Solo DL-44 Blaster-Rep (7).jpg
SW-ESB_Solo DL-44 Blaster-Rep (8).jpg
SW-ESB_Solo DL-44 Blaster-Rep (9).jpg
SW-ESB_Solo DL-44 Blaster-Rep (10).jpg
SW-ESB_Solo DL-44 Blaster-Rep (11).jpg
SW-ESB_Solo DL-44 Blaster-Rep (12).jpg
SW-ESB_Solo DL-44 Blaster-Rep (13).jpg
SW-ESB_Solo DL-44 Blaster-Rep (14).jpg
SW-ESB_Solo DL-44 Blaster-Rep (15).jpg
SW-ESB_Solo DL-44 Blaster-Rep (16).jpg
SW-ESB_Solo DL-44 Blaster-Rep (17).jpg
SW-ESB_Solo DL-44 Blaster-Rep (18).jpg
SW-ESB_Solo DL-44 Blaster-Rep (19).jpg
SW-ESB_Solo DL-44 Blaster-Rep (20).jpg
SW-ESB_Solo DL-44 Blaster-Rep (21).jpg
SW-ESB_Solo DL-44 Blaster-Rep (21).jpg
SW-ESB_Solo DL-44 Blaster-Rep (22).jpg
SW-ESB_Solo DL-44 Blaster-Rep (23).jpg
SW-ESB_Solo DL-44 Blaster-Rep (24).jpg
SW-ESB_Solo DL-44 Blaster-Rep (25) - Copy.jpg
SW-ESB_Solo DL-44 Blaster-Rep (25).jpg
SW-ESB_Solo DL-44 Blaster-Rep (26).jpg
SW-ESB_Solo DL-44 Blaster-Rep (27).jpg
SW-ESB_Solo DL-44 Blaster-Rep (29).jpg
SW-ESB_Solo DL-44 Blaster-Rep (30).jpg
SW-ESB_Solo DL-44 Blaster-Rep (31).jpg
SW-ESB_Solo DL-44 Blaster-Rep (32).jpg
SW-ESB_Solo DL-44 Blaster-Rep (33).jpg
SW-ESB_Solo DL-44 Blaster-Rep (34).jpg
SW-ESB_Solo DL-44 Blaster-Rep (35).jpg
SW-ESB_Solo DL-44 Blaster-Rep (36).jpg
SW-ESB_Solo DL-44 Blaster-Rep (37).jpg
SW-ESB_Solo DL-44 Blaster-Rep (38).jpg
SW-ESB_Solo DL-44 Blaster-Rep (39).jpg
 

Attachments

  • SW-ESB_Solo DL-44 Blaster-Rep (28).jpg
    SW-ESB_Solo DL-44 Blaster-Rep (28).jpg
    109.4 KB · Views: 27
Nice work, though I wonder if it's a recast. "Dense foam" doesn't seem like a material legit companies would use.
 
Nicely done!

I did something similar with mine to make a Mersonn Power 5 for my Imperial Officer.

I've been on the lookout for the E11 made of the same material to wear while trooping in my TK. Saw one at a convention a few years ago and neglected to jump on snagging it when I had the chance. It pops up on Amazon occasionally, but haven't found any recently or on Ebay or even Alieexpress.
 
That finished great...!!! Awesome find and quick conversion.:cool:

There's a $5 toy that can be converted that I did years ago, but of course it's a lot of work....;)
Screenshot 2025-07-10 070616.jpgScreenshot 2025-07-10 070641.jpgScreenshot 2025-07-10 070910.jpgIMG_9317.jpg
 
Nice job, Yaris. It's amazing what a cheap toy and a rich imagination can accomplish! --Ed
 
Just checked the Amazon listing - one of them is on Prime Days sale for $10... so... looks like I'm starting one of these too. :)
 
None of them are accurate my man. Anything budget friendly is not going to be accurate. But I don’t think that’s the point when counting pennies. U gotta cut corners somewhere right?!

IF true accuracy is what ur after but stillbudget conscious I can guarantee you this is your best option for these beauties.

If you know.. you know :cool:
5DF301E9-733D-45FA-A806-D38BF0540798.jpeg
 
None of them are accurate my man. Anything budget friendly is not going to be accurate. But I don’t think that’s the point when counting pennies. U gotta cut corners somewhere right?!

IF true accuracy is what ur after but stillbudget conscious I can guarantee you this is your best option for these beauties.

If you know.. you know :cool:
View attachment 1948342
I totally agree this isn't an accurate representation, but the NEW HOPE version isn't even worth the $15.00 whereas THIS version is.
Unfortunately, I don't know so, can you enlighten us that aren't in the know? --Ed
 
Back
Top